SchoolU101
11-13-2007, 07:08 PM
For a short while the gun works the way it's supposed to.
Then the bolt starts to stick but can be temporarily fixed by pushing the bolt back with my finger or sometimes by just smacking the gun (inconvenient to take off the hopper every time).
Soon there after the gun won't fire. Even when you push the bolt back with your finger, it still won't re-cock. The trigger pull still has pressure, but pulling the trigger does not fire the gun.
After leaving the gun alone for a day or so, it works again; then picks up the same cycle.
I've tried all different combinations of carriers, bolt springs and shims. The bolt rides smoothly and takes little force to remove, though it will not slide off on its own. I'm thinking the problem may lie elsewhere. If you have any ideas, however remote, please let me know.
Setup:
ULE Body
RPG Splinter Rail
RPG Chimera Frame
X-Valve w/ ULT
68/4500PSI compressed air
Thank you in advance.
Then the bolt starts to stick but can be temporarily fixed by pushing the bolt back with my finger or sometimes by just smacking the gun (inconvenient to take off the hopper every time).
Soon there after the gun won't fire. Even when you push the bolt back with your finger, it still won't re-cock. The trigger pull still has pressure, but pulling the trigger does not fire the gun.
After leaving the gun alone for a day or so, it works again; then picks up the same cycle.
I've tried all different combinations of carriers, bolt springs and shims. The bolt rides smoothly and takes little force to remove, though it will not slide off on its own. I'm thinking the problem may lie elsewhere. If you have any ideas, however remote, please let me know.
Setup:
ULE Body
RPG Splinter Rail
RPG Chimera Frame
X-Valve w/ ULT
68/4500PSI compressed air
Thank you in advance.