All MAGS with an ego.........Post up!

[Loguzzzzzz]

Since it has become a popular conversion to mate a Ego frame to a mag I wanted ot start a picture thread.

Please post pictures of all of the Emaggo s that are lurking around.

I will start

My number 1

http://img2.putfile.com/main/9/27218172381.jpg

My number 2 (aka Superman)

http://img2.putfile.com/main/9/27218172334.jpg


Let see some more...........
:cheers:

[lasrsktr]

This Should be considered #3 done by you

:rofl:

But heres mine - Frame Modded By Loguzz :dance:

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6345.jpg?t=1195161793

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6344.jpg?t=1195161908

needs a few finishing touches (grips and feedneck)

Here are the Details:

'05 Ego Frame
Palmers Fatty LPR

[RogueFactor]

***cough***PBL***cough***

[BREAD_DA_PAINTER]

***cough***PBL***cough***


YEAH.. what Rogue said...
:ninja:

[Smoothice]

Heres my eggo framed mag

http://i187.photobucket.com/albums/x57/smoothice15/eggo.jpg

[BREAD_DA_PAINTER]

^^^ :rofl: :headbang:

[robnix]

***cough***PBL***cough***

Professional Bowlers League?

[robnix]

Mine is still at the anodizer. Once it's back, all I have left is assembly.

[Temo Vryce]

Heres my eggo framed mag


Bonus points for originality.

[acropilot19]

Heres my eggo framed mag

http://i187.photobucket.com/albums/x57/smoothice15/eggo.jpg

Dude, I think Smart Parts already applied for the Patent for that frame. Dont be surprised if their Lawyer contacts you shortly.
:tard:

[DvS21]

Thank You Air Assault

http://i196.photobucket.com/albums/aa216/Dv521/DSC01285.jpg


PS I believe it is a star frame too =]
http://i196.photobucket.com/albums/aa216/Dv521/th_MOV01277.jpg (http://s196.photobucket.com/albums/aa216/Dv521/?action=view&current=MOV01277.flv)

[p8ntbal4me]

This Should be considered #3 done by you

:rofl:

But heres mine - Frame Modded By Loguzz :dance:

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6345.jpg?t=1195161793

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6344.jpg?t=1195161908

needs a few finishing touches (grips and feedneck)

Here are the Details:

'05 Ego Frame
Palmers Fatty LPR


Ummm where is the LPR located?

[Smoothice]

palmers fatty is an lpr. It is the vert foregrip.

[p8ntbal4me]

palmers fatty is an lpr. It is the vert foregrip.

So the Maco lines on either side are basically a thru air....... and the ASA adapter is LP?

I have honestly NEVER seen that. Hmmmm.

So the Stably Fatty on the PPS web page is the one pictured here??

If so Im picking one up,.. thats a hell of an external LPR in a sleeper setup! :clap:

[Smoothice]

So the Maco lines on either side are basically a thru air....... and the ASA adapter is LP?

I have honestly NEVER seen that. Hmmmm.

So the Stably Fatty on the PPS web page is the one pictured here??

If so Im picking one up,.. thats a hell of an external LPR in a sleeper setup! :clap:

Correct. Good luck. You can also achieve the same thing with a stab but the fatty is designed for lower outputs.

I would use the fatty if I hadn't already purchased a stab.

You can see my stab on my eggo mag.

[jbg00d]

This Should be considered #3 done by you

:rofl:

But heres mine - Frame Modded By Loguzz :dance:

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6345.jpg?t=1195161793

http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6344.jpg?t=1195161908

needs a few finishing touches (grips and feedneck)

Here are the Details:

'05 Ego Frame
Palmers Fatty LPR

Nice. what rail is that? I thought liked the shadow rail, but now??

[Smoothice]

I believe that is a recon rail. Someone please correct me if I am wrong

[lasrsktr]

So the Maco lines on either side are basically a thru air....... and the ASA adapter is LP?

I have honestly NEVER seen that. Hmmmm.

So the Stably Fatty on the PPS web page is the one pictured here??

If so Im picking one up,.. thats a hell of an external LPR in a sleeper setup! :clap:


Yep as Smoothice was saying That is infact run that way. The LPR hose is tapped out of the side of the asa and running straight into the frame.

I have roughly the same setup on my Pneumag except i am using a stab and the ASA is tapped on the top so the LPR hose is running inside of the rail for a truly sleeper look.

The Stab was tapped for a Second HP input/output so it works identical to the Palmers Fatty.
http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6370.jpg


and to answer the rail question.

All the rails pictured on the Emaggos are made by RPG

On my marker it is a Recon rail

On the Superman Emaggo that is a Shadow

And the Black and Red Emaggo #1 that is a Splinter Rail.

All Nice pieces, but I tend to like the looks of the Splinter and Recon for the Emaggos due to the squareness of the back end of the rail and how they sit almost flush with the frame.

[jbg00d]

Yep as Smoothice was saying That is infact run that way. The LPR hose is tapped out of the side of the asa and running straight into the frame.

I have roughly the same setup on my Pneumag except i am using a stab and the ASA is tapped on the top so the LPR hose is running inside of the rail for a truly sleeper look.

The Stab was tapped for a Second HP input/output so it works identical to the Palmers Fatty.
http://i166.photobucket.com/albums/u110/lasrsktr/IMG_6370.jpg


and to answer the rail question.

All the rails pictured on the Emaggos are made by RPG

On my marker it is a Recon rail

On the Superman Emaggo that is a Shadow

And the Black and Red Emaggo #1 that is a Splinter Rail.

All Nice pieces, but I tend to like the looks of the Splinter and Recon for the Emaggos due to the squareness of the back end of the rail and how they sit almost flush with the frame.

Thanks for the info on the rail, but I was wondering how come you opted the drill and tap your reg instead of using a 1/4 slip "t" joint? That would have been much cleaner. Dont get me wrong, your marker is one of the nicest I've seen.

[lasrsktr]

Thanks for the info on the rail, but I was wondering how come you opted the drill and tap your reg instead of using a 1/4 slip "t" joint? That would have been much cleaner. Dont get me wrong, your marker is one of the nicest I've seen.


Well I bought the Stab pre tapped for the 2nd HP input/output, and the Fatty comes with the 2 HP input/outputs from the factory.

I really do not like the look of the T fittings as they just look big and extremely Bulky. The gauge on my Stab was just there for tuning purposes and has since been removed to allow a smoother flow of the macro line.

[jbg00d]

Well I bought the Stab pre tapped for the 2nd HP input/output, and the Fatty comes with the 2 HP input/outputs from the factory.

I really do not like the look of the T fittings as they just look big and extremely Bulky. The gauge on my Stab was just there for tuning purposes and has since been removed to allow a smoother flow of the macro line.


Ya, I see your point, I just really like the microline stuff. I've never seen one of the puematic mags in operation, how do they compare to the electro frames?

[lasrsktr]

I love the LPR off the front as well, but it just wasn't stealthy enough for my tastes.

Here is the Before on the Pneumag w/ the palmers micro rock hanging off the front.
http://i166.photobucket.com/albums/u110/lasrsktr/IMG_0641.jpg?t=1195671486

The pneumags are nice, I like that it still doesn't run on batteries. Can play in the rain and not worry about any electronics blowing up.

The speed is there as it is purely mechanical you can shoot as fast as you can pull the trigger.

Very Light pull and almost electro like.

Comparing the Emaggo and the Pneumag they are totally different in terms of feel. I guess thats why i have one of each. :rofl:

[jbg00d]

I like it the way you have it setup now, with the Palmers stabilizer. I just bought a smart parts LPR for $12 on eBay, but now I think I want to go with the 15 degree vert ASA and the Palmers Fatty, but I'll be damned before I pay $90 for one. If it comes down to it, I'll use the smart parts LPR on the regulator before I drill a hole in the ASA. I've seen guys use the LPR with an elbow through the gauge port before, it didn't look too bad, kind of like an autococker with all their stuff hang'in off the front you know..

Do you of someone makes an after market left hand X valve reg? you know where the air input would be on the left side?



I love the LPR off the front as well, but it just wasn't stealthy enough for my tastes.

Here is the Before on the Pneumag w/ the palmers micro rock hanging off the front.
http://i166.photobucket.com/albums/u110/lasrsktr/IMG_0641.jpg?t=1195671486

The pneumags are nice, I like that it still doesn't run on batteries. Can play in the rain and not worry about any electronics blowing up.

The speed is there as it is purely mechanical you can shoot as fast as you can pull the trigger.

Very Light pull and almost electro like.

Comparing the Emaggo and the Pneumag they are totally different in terms of feel. I guess thats why i have one of each. :rofl:

[lasrsktr]

I like it the way you have it setup now, with the Palmers stabilizer. I just bought a smart parts LPR for $12 on eBay, but now I think I want to go with the 15 degree vert ASA and the Palmers Fatty, but I'll be damned before I pay $90 for one. If it comes down to it, I'll use the smart parts LPR on the regulator before I drill a hole in the ASA. I've seen guys use the LPR with an elbow through the gauge port before, it didn't look too bad, kind of like an autococker with all their stuff hang'in off the front you know..

Do you of someone makes an after market left hand X valve reg? you know where the air input would be on the left side?


You would be looking for a reverse Xvalve. They make them and some pop up every now and then in the BST classifieds.

Just run the LPR off the ASA on/off and have the hose run directly up into the grip frame.

That would be one of the cleanest ways to go if you don't want to drill and tap the 15* or vert ASA.

[jbg00d]

You would be looking for a reverse Xvalve. They make them and some pop up every now and then in the BST classifieds.

Just run the LPR off the ASA on/off and have the hose run directly up into the grip frame.

That would be one of the cleanest ways to go if you don't want to drill and tap the 15* or vert ASA.

Reverse X Valve? I'm going to guess that's where the air input is on the left? of so, Yes.

I really like the way yours is set up with the stabilizer. I want the fatty, but I can't see sending 90 bucks on it. I'm going to see if someone posts one on ebay or something but for now, Thanks exactly what I'm going to do until then.

[danoxide]

wheres the how-to for this mod? i cant find it anywhere

[Smoothice]

wheres the how-to for this mod? i cant find it anywhere

try using the search button!!!!



J/K!!

search for latches109 I believe.

[p8ntbal4me]

wheres the how-to for this mod? i cant find it anywhere


Here you go,..... Latches EMAGGO How-To-Guide (http://www.automags.org/forums/showthread.php?t=211255)


~ P8nt

PS: I checked,... the search button works! J/K! :D

[jade_monkey07]

Heres my eggo framed mag

http://i187.photobucket.com/albums/x57/smoothice15/eggo.jpg
thats amazing

[Chris_automag_07]

Heres my eggo framed mag

http://i187.photobucket.com/albums/x57/smoothice15/eggo.jpg

belgian.