Gutted an SLG for pics...

[NoLifeLeft]

So my friend let me borrow his new SLG to install the trigger for him. Naturally I needed to see what makes it tick. :D

Wired eyes with deep wire channels to keep them safely in place.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0039.jpg

The board and noid.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0043.jpg

The sear.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0057.jpg


The sear in the body. Held in place by a loose pin surrounded by the frame when assembled.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0053.jpg

The bolt and stem that makes up the dump chamber. Note the hole in the bolt that refills the chamber.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0060.jpg

Dye's dorky new reg threads. :tard: Hyper2 in pic for comparison.
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0050.jpg

Overall, not bad. Very simple design. Seems of reasonable quality for the price.
Feel free to ask questions.

[Ruler_Mark]

is it just me or do ya'll see eblade frame converions :D

[NoLifeLeft]

more comparisons.

Hyper2 vs. Hyper3
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0063.jpg

PMR vs. SLG
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0065.jpg

PM7 vs. SLG
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0067.jpg

[BigEvil]

is it just me or do ya'll see eblade frame converions :D

That thought crossed my mind as well. I am wondering if that noid is sitting too far back though.

[DvS21]

noid may be to far back, but you could do a little milling for eyes, easily with this frame... hmmm...

[dixieoutfitter94]

when I first found out it had a trip sear I thought SLG mag :dance: . It would be more rare then a spydermag :shooting:

[CKY_Alliance]

Wait till they release UL frames for em...then you can make a UL'd mag..hmm now that I would shoot..

[thefool]

how about a mech pnue slg

[Caboose]

Wait till they release UL frames for em...then you can make a UL'd mag..hmm now that I would shoot..
They probably are not releasing UL frames for them as the pancake noid is too large to fit in one. They will probably release upgrade frames (metal frames, better trigger, etc).

[punkncat]

I suppose that for the price they don't expect you to upgrade, thus the non-standard reg threads. Thats the only bad idea (from Dye) I see at this point.

[Caboose]

I suppose that for the price they don't expect you to upgrade, thus the non-standard reg threads. Thats the only bad idea (from Dye) I see at this point.
The hyper 3 really has no need to be upgraded. The hyper 2 (and hyper 1?) was based off of the sidewinder design, as I understand it. It is a very consistent regulator and definitely one of the top regs on the market. They just made it smaller, lighter and increased the efficiency of the spring stack. All the new Dye/Proto guns (SLG, PM8, DM8) use only hyper 3 threads.

[warbeak2099]

They probably are not releasing UL frames for them as the pancake noid is too large to fit in one. They will probably release upgrade frames (metal frames, better trigger, etc).

DYE/Proto has already announced their plans to release a UL frame for it.

[Toll]

The threads allow them to slim down the width of the frame, thats is the only conclusion I can come to.

[Caboose]

DYE/Proto has already announced their plans to release a UL frame for it.
Really? Huh, must have missed that. That's going to be one fast and light gun :shooting:

Toll, it also slims down the profile and reduces weight... only by a few grams but who's counting?

[NoLifeLeft]

OK. I've been seeing a ton of trigger questions about the SLG vs. the PMR. So here they are.

Blk/Olive = PMR Solid Black = SLG
http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0074.jpg

http://i132.photobucket.com/albums/q31/NoLifeLeft/IMG_0073.jpg

Looks like about 5 seconds with a Dremel if you ask me.:D

[Spider-TW]

Looks like about 5 seconds with a Dremel if you ask me.:D
Yes, but why? Do they feel different? I've never tried an upscale, 'dual durometer' trigger before.

[pump]

so is the noid in a good place to push the back of a mag sear?

ULE frame!!! maybe NDZ will make a frame for PMR also!
cant wait to see them on mags

man you gotta love back pushing and up pushing noids!!!!!!

[Coralis]

That looks like it might be the easiest to convert for mag use yet and with eyes already i might just have to sell my hyperframe

[OMRomero]

I'm liking what I see. Any shoot-down similar to the ion during high rates of fire?

[NoLifeLeft]

Yes, but why? Do they feel different? I've never tried an upscale, 'dual durometer' trigger before.


The comparison was to show that ANY PMR trigger you like now would be easy to convert for an SLG. Alum. triggers cut easy too. I compared the stock triggers because thats what I had lying around.