Gauging Interest in Tunablades

[craltal]

Since this topic came up in the CNC battery pack thread a few times , I thought I'd assist and make it it's own separate thread to assist in properly gauging the interest so Tuna would know if it's worth making a new run.

Just for clarification, I am in no way affiliated with Tuna, just trying to consolidate the interest so he can decide if there's enough interest to do another run.

Post here along with quantity desired and i"ll try my best to keep an accurate count.

EDIT:
The count below is up through Tuna saying he's making more. I figure anything beyond that isn't necessary... :D
----------
hard count of 35 with 8 "maybe mores" and "at leasts"

(through message #30)

[lasrsktr]

I'd Take 2 for sure.

[cyrus-the-virus]

I'd take one if it had the roller bearing.

[Mayzons]

1 for me

[lasrsktr]

I'd take one if it had the roller bearing.


Not to debate this or anything... Wasn't the reason he stopped producing the bearings was because the extra cost of the bearing was not worth it from a performance standpoint epically since the travel is so small...

[Chrishew09]

Defiantly want one, count me in for one.

[MANN]

Not to debate this or anything... Wasn't the reason he stopped producing the bearings was because the extra cost of the bearing was not worth it from a performance standpoint epically since the travel is so small...

If you have felt one you will agree that the bearing is worth the extra $$.

Count me in for at least one.

[Babylon 5]

I'd take 2 maybe 3.

[Warwitch]

I have a Tunablade I will gladly trade for a TL63.

[wetwrks]

I would go for at least 1.

[PsychoBaller]

I have a Tunablade I will gladly trade for a TL63.

Why? The TunaBlade is FAR superior than the TL63.

[RA1N1ER]

i'd be interested (1)

not to be all goofy here but, what's the difference of the one with roller bearing? :D

[Ruler_Mark]

i'll take 1 if it comes with bearing but not annod or assembled. but parts provided

[AirAssault]

I would def pick up a few. I sold off all my x/emag lowers but will buy some more in the future.

[mag79]

2 for me

[dsrkd]

Two here.

[VeeWee]

I've been trying to get one. If Tuna does a run of them count me in for two.

[Swamp Thing]

Count me in for two

Swamp

[Ratzo]

Which are the TunaBlades? Any Pics?
I never really payed much attention to the triggers on the E-mags so I don't know which ones are which.
Now that I have A Micro E-Mag I would really like a new trigger so I now have to familiarize myself with the different ones that are out there.
So needless to say I would be a probable customer.

[Ruler_Mark]

thar be a tuna:

http://rscheata.net/pb/emag/emagb4a-4.JPG

[TnDeathInc]

i would buy three tomorrow, maybe a fourth for a project.

[Piranti]

I would definitely be interested in 1 or 2 depending on if I could get one raw and both with the roller bearing.

[Whee McGee]

Heck yes

[craltal]

Heck yes


I'm assuming that counts as a "1" unless I hear otherwise...

[Outlaw5]

I can see me getting another for my E-MAG now....the X-MAG already has one. "Outlaw5"

[flyingpootang]

I need 2

[Looper]

2 for sure... maybe more if I should acquire another E/XMag before this comes to fruition.

[Twistedpsyche]

Put me down for 1 DEFINITE and an extra "maybe".
Thanks.

[Mongoose]

at least 2

[Tunaman]

He's making them now. Hang tight!

[Ratzo]

That was the trigger I was hopeing it was. :clap:
I deffinetly want one. :headbang:

[Twistedpsyche]

He's making them now. Hang tight!

Seriously? Sweet!!!

[PsychoBaller]

thar be a tuna:

http://rscheata.net/pb/emag/emagb4a-4.JPG

Are those grips Wrap arounds and 1 full piece? or are the front ridges section, seperate from the Panels? Where could I find a pair?

[Mongoose]

He's making them now. Hang tight!

My hero!!! :dance:

[miroslav]

One for me please!

[blunt5619]

Definetly want two!!!!!!!!!!!!!!!!!!!

[FiXeL]

Not on the list, but i would like one too!

[AutomagRT1483]

Count me in on this action. I want one bad! :shooting:

[cyrus-the-virus]

Roller bearing?

[Russ]

COOL!

I want one :)

[kcpaintballpage]

i am wanting one

[Kory]

I would be in for 1
Kory

[Shade12]

I'll take 2.

[manwe33]

ill take 2

[Dark Side]

I'll take one. Any idea on the colors available?

[TeamJackal37]

I want 2

[PsychoBaller]

Was chillen with Tuna the other day; said mucho Triggers are in the works mos def.

:cheers:

-baller

[Outlaw5]

Right On!!!!!!!! :D

[Twistedpsyche]

Was chillen with Tuna the other day; said mucho Triggers are in the works mos def.



Excellent!! Can't wait. :clap:

[Smokee_2_7]

Put me down for one for sure. Can we get a definite yes/no on the roller bearings?

Gloss black, preferably.



Carl

[AJoe]

I'll take one!!!!! or two.

[ICOM]

Id take one for my xmag

[russc]

How much do these cost, anyways?

[joelbird]

i am in for one. but depending on price maybe 3 total

[BlueDragonX]

I definitely want at least 1 :D

[PsychoBaller]

TunaBlades are very nice indeed... :cool:

http://www.mcarterbrown.com/gallery/data/811/medium/DSC000131.JPG

-baller

[UberGeek]

I'd take one

[Silverback]

Put me down for one , roller bearing or not.

[sean33]

me too, want one, and definetly want a roller trigger!

[Ruler_Mark]

Put me down for one as well as a switch.
the switch in the above pic is from luke

[Hexis]

Just more good feedback for Tunablades. It's a nice piece of gear.

http://www.visi.com/~mjb/Paintball/TunaBladeGreenEMag.jpg

[Danterwhoo]

How much do these things run??? I would like one but don't want to break the bank......schools eating all my money, what will they run?? Ohh and what makes them superior?? Are they only for EMags??

[Twistedpsyche]

Any news on these?? I'm super excited at the idea of getting my hands on one or two!!

[Silverback]

the switch in the above pic is from luke

Oops, Boy is my face red!! :tard:

[Ratt]

Count me in for one (two, depending on the price), but at least one for sure.

[Tunaman]

Emags only. They wont work in a regular mag. ;)

[Twistedpsyche]

Emags only. They wont work in a regular mag. ;)

That's what I thought. Still need 1 or maybe 2.
Any idea when we may be able to get some of these? Not trying to be pushy, just planning my spending. :)

[Mongoose]

That's what I thought. Still need 1 or maybe 2.
Any idea when we may be able to get some of these? Not trying to be pushy, just planning my spending. :)
just set aside some money now....becouse when they arrive they will also sell out just as fast!

[Mongoose]

Emags only. They wont work in a regular mag. ;)

is there a way to mod the frames?

[Twistedpsyche]

just set aside some money now....becouse when they arrive they will also sell out just as fast!

Done and Done.

[Danterwhoo]

I wonder if these will work with the new G-Force Pneumatice frames......???

[craltal]

I wonder if these will work with the new G-Force Pneumatice frames......???

according to the info posted in the thread, g-force frames are using their own trigger design so these won't fit

[MeÐiCX]

Status? I'll take one, possibly two.

[SummaryJudgement]

I will definitely take at least two...... :headbang:

I just picked one up on a e-mag I got recently. I love the feel of the Tunablade more than any other trigger I have on any of my mags.

It's a MUST HAVE :bounce:

:cheers:

[Twistedpsyche]

Any new news on the possibility of getting on of these? Just curious, I'd love to get one in time for the spring season!! :)

[Chrishew09]

So Tuna, what the status?
I have my money put a side with your name on it.

[BlueDragonX]

As do I! I definitely want one out of this run when the time comes.

[Tunaman]

They are coming. I think I am going to keep this whaole batch silver to speed things up. I need your input on this....

[Rudz]

They are coming. I think I am going to keep this whole batch silver to speed things up. I need your input on this....


awesome

[MeÐiCX]

I'd like some black ones myself but either will work!

[Ruler_Mark]

as said in a previous pm, raw un-assembled(meaning top magnet not installed) would be perfect for me so i can get it ustom anno'd

[jaywmustang]

i will take one but i prefer black but i can live with silver

[dsrkd]

2 black for me.

[Chrishew09]

They are coming. I think I am going to keep this whaole batch silver to speed things up. I need your input on this....
I personally would prefer black but hey i'm not picky, i just want one.

[Tunaman]

Looks like its going to be 75% black and the rest raw.

[Looper]

Looks like its going to be 75% black and the rest raw.
Black is good... Thanks

[VeeWee]

Tuna have you been keeping a running total of the people interested or is this going to be a limited run?

[UberGeek]

I would also prefer black too

[BigEvil]

I would take two of either silver or black,

[ICOM]

and i just sent my things off to get annoed, I prefer silver but i guess i will be stuck with raw..

[Tunaman]

Tuna have you been keeping a running total of the people interested or is this going to be a limited run?There will be plenty... ;)

[A-Tach-One]

Im in for a raw. :D

[Twistedpsyche]

Black or silver, I don't care, I just really really want one!! :)

[Outlaw5]

Dust Black...then I can put my gloss on the E-Mag and the Dust on my X... :D

[Twistedpsyche]

Dust Black...then I can put my gloss on the E-Mag and the Dust on my X... :D

Yeah, dust black would be really cool. But silver is also nice.
But if they're going to be black, dust is nicer than gloss IMO.

[garbageman705]

Does the Tunablade allow you to fire in mech mode as well as E-mode? I had a trigger that would not fire in mech mode. Also does the Tunablade have an adjustable magnet screw. If so, I really want one.

[Outlaw5]

Yes
Yes and
Yes. You want One!!!
:D

[garbageman705]

Alright, I want one in black!

[VeeWee]

There will be plenty... ;)

Cool, I don't want to miss out.

[Radarluv]

I will take one in black please

[Chrishew09]

Status?

[evade]

I'm in for 2. Raw or black.

[Silverback]

I'm still in for one, raw is fine, since I haven't decided on an ano color yet. How much and when do you need the money? :bounce:

[joelbird]

my emag may be going out for ano in about a month, should i believe there is a chance there would be any in the works by then and wait?

[jp8900]

Im definitely in for a black one..

[Twistedpsyche]

Glad to see so much interest!!

Can't wait to get one of these on my Etac. Can't stand that stock trigger.

[Smokee_2_7]

Eagerly awaiting some king of status report on these!


Pleeease?



Thanks,

Carl

[Geronimo7]

Eagerly awaiting some king of status report on these!


Pleeease?



Thanks,

Carl

see page 2 http://www.automags.org/forums/showthread.php?t=228273
;)

[Twistedpsyche]

Dang, those went fast, gotta get my hands on one of these!!!