ULT Q's

[xxkylexx]

Hey guys,
I've got 6 shims in my ULT and it sticks out of the valve a little (I'd say about 3/4 the thickness of that top lip on the ULT sticks above the valve surface), but still goes into the body.

Are there any problems with using this many shims and the ULT not fitting very flush with the valve?

Also, I thought the ULT pretty much killed the RT effect? I can easily bounce my trigger with 800 PSI output with my dynaflow.

Thanks,
Kyle

[Ruler_Mark]

6 was the final count jesus.

[xxkylexx]

6 was the final count jesus.
5 total, one is a level 10 shim.

[TheRock]

1 lvl 10 shim is 2 ult shims in size.
and it does take away bounce when its installed correct, but with many shims in it its easy running :D

[xxkylexx]

1 lvl 10 shim is 2 ult shims in size.
and it does take away bounce when its installed correct, but with many shims in it its easy running :D
Soooo, do I have it installed incorrectly? :confused:

[TheRock]

if you have it for no bounce, then yes! if you just want it nice with bounce youre ok :) i have it this way too :D

[yaaaowHuggs]

Its not that you have installed 'incorrectly'... you just have it installed for bounce :D