intelliframe pneumag

[paintball72]

has anyone fit all of a pneumags pneumatics into an intelliframe. (i did a search and couldnt find anything) i am thinking of ordering a marker from tuna and am thinking ahead for putting pneumatics in and am wondering if an intelliframe will work.
thanks guys sorry if this seems like a silly question i just dont like to have to buy more than i need :)

[secretweaponevan]

Yes, but it will require some milling of the frame and actuator. Do a search on youtube.

[rawbutter]

There are a few examples of Intelliframed pneumags in this thread.

http://www.automags.org/forums/showthread.php?t=222337

Someone a while ago also did a pneumag with a micromag body, and he managed to even get the LPR inside the frame. Here's the thread, but the pics don't work anymore. You might have to PM the creator.
http://www.automags.org/forums/showthread.php?t=214210&highlight=pneumicro

[VTLO910]

There are a few examples of Intelliframed pneumags in this thread.

http://www.automags.org/forums/showthread.php?t=222337

Someone a while ago also did a pneumag with a micromag body, and he managed to even get the LPR inside the frame. Here's the thread, but the pics don't work anymore. You might have to PM the creator.
http://www.automags.org/forums/showthread.php?t=214210&highlight=pneumicro


Here is that guys mag... Belongs to Automagrt666

http://img.photobucket.com/albums/v116/vtlo910/micro.jpg

PURE SWEETNESS...!

[Psiclonius01]

Hey Everyone,

I have a Tac-One and pretty happy with it, but I want to upgrade the trigger. Is it easier to walk the trigger with pneumag than with the ULT??

What would it cost to add pneumag my Tac-One?

Psiclonius

[rawbutter]

Hey Everyone,

I have a Tac-One and pretty happy with it, but I want to upgrade the trigger. Is it easier to walk the trigger with pneumag than with the ULT??

What would it cost to add pneumag my Tac-One?

Psiclonius

A pneumatic trigger is lighter than a ULT. Very easily walkable.

Cost? That depends. Parts will run you anywhere from $60-$140, depending on how you set everything up. If you don't have the necessary tools (like drill bits, taps, etc), the price can be even higher. (This is a DIY mod, by the way. Except for the G-Force pneumatic frames, you can't outright buy a pneumatic trigger... not unless someone else is selling theirs.)

If you don't have tools and you're trying to go with the cheapest option, then paying someone else to do it for you might be your best bet. Heck, for $50 plus the cost of parts/shipping, I'd do it for you.

[Psiclonius01]

A pneumatic trigger is lighter than a ULT. Very easily walkable.

Cost? That depends. Parts will run you anywhere from $60-$140, depending on how you set everything up. If you don't have the necessary tools (like drill bits, taps, etc), the price can be even higher. (This is a DIY mod, by the way. Except for the G-Force pneumatic frames, you can't outright buy a pneumatic trigger... not unless someone else is selling theirs.)

If you don't have tools and you're trying to go with the cheapest option, then paying someone else to do it for you might be your best bet. Heck, for $50 plus the cost of parts/shipping, I'd do it for you.


on a scale from 1 to 10, 10 being the hardest. How would you rate the difficulty of this project?

[rawbutter]

on a scale from 1 to 10, 10 being the hardest. How would you rate the difficulty of this project?

Hm.... you ever play with technic Legos when you were a kid? If you can do that, then you can do this.

Doing it yourself isn't that hard if (a) you have the right tools and (b) you have a clear picture in your head of what you're supposed to do. Watching pneumagger's "how-to" video (http://www.fusionowners.org/pneumag/pneumag_how_to_large.wmv) always helps too.

Things only get complicated when you try to cut corners or don't fully understand what you're doing and why. Course, you can always ask questions here or search for answers.