jonny72888
03-09-2008, 06:44 AM
well i could never find a drop forward that would give me the feel i was looking for and would fit an 88ci so yesterday i made one and its not to bad for my first try.
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3263.jpg
a 1/4"x1/4" steel rod and a CP mini on/off.
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3264.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3266.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3267.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3269.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3270.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3271.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3273.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3275.jpg
so what i did was clamp the rod in a vise and heat up the part i was going to bend so i wouldnt snap it.
then i used a cut off wheel to make the groves for the on/off to slide on.
then i drilled out the holes above the on/off and taped them to 8-32 so i could used 2 set screws to keep the on/off from slidding.
then drill out the hole to mount it to the gun.
i just need to paint it gloss black to match.
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3263.jpg
a 1/4"x1/4" steel rod and a CP mini on/off.
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3264.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3266.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3267.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3269.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3270.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3271.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3273.jpg
http://i5.photobucket.com/albums/y173/jonny72888/HPIM3275.jpg
so what i did was clamp the rod in a vise and heat up the part i was going to bend so i wouldnt snap it.
then i used a cut off wheel to make the groves for the on/off to slide on.
then i drilled out the holes above the on/off and taped them to 8-32 so i could used 2 set screws to keep the on/off from slidding.
then drill out the hole to mount it to the gun.
i just need to paint it gloss black to match.