PDA

View Full Version : Please help! lvl 10 carrier removal?


SpudCrushr
03-11-2008, 07:08 PM
So I bought a tac one with ULE RT, Xvalve, lvl 10, etc..

I put the red spring in, but now the trigger won't gas up. I talked to another guy and he said it was "bolt stick" and that I need to install the next size up carrier. How do I get it out of the powertube?

I took the bolt and spring off, then I unscrewed the brass piece. 3 shims fell out, now I need to get the carrier out. I don't want to break anything though.... What now?
Geronimo7
03-11-2008, 07:12 PM
try using your field strip screw
just put it down in there and sort of thread it on a little till it grabs, then pull it out
SpudCrushr
03-11-2008, 07:15 PM
try using your field strip screw
just put it down in there and sort of thread it on a little till it grabs, then pull it out

THANKS!!!

...They had the one groove installed, and that's the biggest I have. :(
Geronimo7
03-11-2008, 07:19 PM
no problem
remember when you change carriers keep using the same o-ring ;)
and to get the carrier back in, just use the eraser side of a pencil or something
SpudCrushr
03-11-2008, 07:20 PM
no problem
remember when you change carriers keep using the same o-ring ;)
and to get the carrier back in, just use the eraser side of a pencil or something

Where can I buy more?
Geronimo7
03-11-2008, 07:21 PM
how many carriers do you have ?
Geronimo7
03-11-2008, 07:22 PM
Where can I buy more?

Here is a good starting place
http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.catalog&categoryID=38
SpudCrushr
03-11-2008, 07:22 PM
how many carriers do you have ?

One installed, 3 in box.

I bought this new though...

Sorry, they had the 1 grove one dot... I have 3 smaller ones.
Geronimo7
03-11-2008, 07:28 PM
how many grooves and dots on the other three
SpudCrushr
03-11-2008, 07:29 PM
None
1 dot
1 grove
1 grove, 1 dot (installed)
Geronimo7
03-11-2008, 07:45 PM
ya there should be more. if it is new, contact who you got it from.

other than that you could try and get some used ones from the b/s/t

good luck :cheers:
SpudCrushr
03-11-2008, 07:47 PM
ya there should be more. if it is new, contact who you got it from.

other than that you could try and get some used ones from the b/s/t

good luck :cheers:

Thank you!