View Full Version : My longBow..so far
bronco_85
03-13-2008, 09:20 PM
Here's my longbow..
I like to call LongBow SPR (special purpose rifle) like the SPR mk 12 rifle
OK IT'S not finished that why there's my e-mag lowers on it
enventualy ill fit a m-16 lower receiver with a VN 20 rd mag + single trigger option
And beleive me this scope is very usefulll
At first sight it might look like a bunch of bolt-on parts..but take a closer
My barrel is 16'' special ops crabon fiber made by stiffi
and it has a screw-on silencer wich is working...and it not made with insulating foam!
http://www.supermotors.net/getfile/609741/fullsize/dsc00012.jpg
The front handgard had 4 molded RIS rails not bolted...so I had to remove one of'em to fit the longbow mag
I filled the hole with a flat bar and some coldweld putty
I Also had to grind the handgard rear cap
http://www.supermotors.net/getfile/609744/fullsize/dsc00018.jpg
Heres a custom made cheek rest made out of aluminum plate..when I play with this gunI on wear goggle..not a fullmask
http://www.supermotors.net/getfile/609745/fullsize/dsc00019.jpg
As i am pissed to play with a remote I had to find a solution..a 12 gram adapter isnt good for the gun since it CO2...13 ci nitro was the only was to go
And I had a bracket specialy made for the 13 ci bottle i could have made it my self.. but I lack of welding skills
http://www.supermotors.net/getfile/609746/fullsize/dsc00020.jpg
This gun is a BEAST it weighs 13 pounds
just for caomparison an m-16 weighs around 5,5 lbs...7 lbs with 30rounds mag
Sumthinwicked
03-13-2008, 09:22 PM
im impressed
mr doo doo
03-13-2008, 09:24 PM
holy smokes... :eek:
Dark Side
03-13-2008, 09:28 PM
Sweet setup. How does the stock feel shouldered? I always thought the LB stock set the marker up a bit low.
michbich
03-13-2008, 09:32 PM
Very nice, You have the nicest longbow i have seen so far. :headbang:
bronco_85
03-13-2008, 09:42 PM
Sweet setup. How does the stock feel shouldered? I always thought the LB stock set the marker up a bit low.
The stock it OK ..a tad short for me im 6'1" id like it 3 inches longer
and I had to put a rail riser to get a correct alignment with my eye
mag79
03-13-2008, 09:59 PM
hey, why didn't sell me that one :D
bronco_85
03-13-2008, 10:15 PM
you would had to pay at least 3 times what you paid...lol
Ruler_Mark
03-13-2008, 10:33 PM
is the scope even usable with the inconssitence in ball flight?
is that a silencer on the tip or a mock?
bronco_85
03-14-2008, 05:22 AM
is the scope even usable with the inconssitence in ball flight?
is that a silencer on the tip or a mock?
And beleive me this scope is very usefulll
between 50 and 80 feet im always right on the target
after 90 ft I need to raise the gun to get my shot as far as i want...but my scope has a range finder reticle ...I can still aim when I do ballistic shots
http://www.supermotors.net/getfile/609747/fullsize/dsc00021.jpg
on the picture its mock silencer (A-5 flatline shroud)...but its not a fake anymore
my goal with this gun is to be as silent as possible..I got a mag...carbon fibre barrel..silencer
in a gun fight its almost impossible to hear me
when theres no sounds around..its still obvious that im shooting...but at 80ft and if I SHOOT ONLY ONCE...they will not find me most of the time I use a ghille suit
Im not saying that im the best sniper out there...everybody with the same equipment will do the same job
But I carry one of the most lethal weapon on a paintball field..PATIENCE!!
Ruler_Mark
03-14-2008, 10:22 AM
oh speaking of ghillies i hate thoose at night play
jaywmustang
03-14-2008, 12:58 PM
sweet
MechWarrior
03-14-2008, 01:04 PM
That has to be the sweetest Mil Spec gun I have seen!
You say you play with only goggles and not a full mask, are there still fields that let you play like that? I haven't seen anyone play with just goggle in about 10 years since some rules were changed.
bronco_85
03-14-2008, 02:24 PM
You say you play with only goggles and not a full mask, are there still fields that let you play like that? I haven't seen anyone play with just goggle in about 10 years since some rules were changed.
Once ine a year ther's a 24 hours game in St-george de beauce( a back country area in canada) and they allow goggles
but most paintballfields i play dont allow goggles..but the rest of my face is covered with burlap(ghillie suit) so its less noticeable
btw im only half sutpid... most of the time I put a mouthpiece :tard:
bronco_85
08-12-2008, 08:47 PM
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00363.JPG
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00361~0.JPG
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00070.JPG
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00073.JPG
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00074.JPG
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00075.JPG
I changed the emag lowers for a standard double trigger lower
+ I custom fabbed a carry handle that fits the gun perfectly
I tried to duplicate a m-16 lower..it's still rough though
I'm not satisfied with the back end, i'll work on it very soon
and as every thing else on this gun, its STURDY!!! very solid!
olinar
08-12-2008, 08:53 PM
That is sweet. Reminds me of they cheytac receiver that AirHog made for an a5.
:High five:
JesseB
08-13-2008, 08:07 AM
Watch out for the party van if that Silencer isn't registered the FBI or ATF will come bust your butt and that's a federal felony.
Regardless of the fact that it's for a paintball gun because a paintball gun silencer can be modified to work on a real gun in minutes.
bronco_85
08-13-2008, 10:36 AM
Watch out for the party van if that Silencer isn't registered the FBI or ATF will come bust your butt and that's a federal felony.
Regardless of the fact that it's for a paintball gun because a paintball gun silencer can be modified to work on a real gun in minutes.
I really dont care about them...I'm canadian
there is also federal laws about silencers in canada but will not work on a real fire arm...at least it will not deaden as much as it does on my automag
anyways...a real gun will burn the internal of my silencer...I made it out of rubber
J_Kizzy
08-13-2008, 11:58 AM
You like Schwartz's Deli? The smoked meat there is incredible.
Canadian partyvan can bust you as well I'm pretty sure. So long as you arent doing anything silly with it I doubt you'd ever raise suspicious glances.
JesseB
08-14-2008, 06:55 AM
I really dont care about them...I'm canadian
there is also federal laws about silencers in canada but will not work on a real fire arm...at least it will not deaden as much as it does on my automag
anyways...a real gun will burn the internal of my silencer...I made it out of rubber
It only needs to be used once...
SithSteve
08-14-2008, 07:41 AM
What does the rig weigh in at?
Jeez man, its not a silencer, ita a raincover!!!!!!!
mostpeople
08-14-2008, 09:23 AM
do you have a ghillie?
Hilltop Customs
08-14-2008, 09:25 AM
now that is impressive.......
yea you wouldnt want to get rain in the barrel....therefore you put the shroud around it....making the marker quieter is just a side effect not an intention :ninja:
ThePixelGuru
08-15-2008, 12:54 PM
I really dont care about them...I'm canadian
there is also federal laws about silencers in canada but will not work on a real fire arm...at least it will not deaden as much as it does on my automag
anyways...a real gun will burn the internal of my silencer...I made it out of rubber
FYI, here in the states a *ahem* raincover needs to work only once. If it quiets a firearm by even one decibel even once, you're going away for a long time. They seem a little more reasonable about firearm stuff up north, but be careful.
Nice 'mag. And people claim my rigs are heavy...
bronco_85
08-26-2008, 05:45 PM
You like Schwartz's Deli? The smoked meat there is incredible.
yep it's good...but you should try ''Smoked meat pete'' 30 min west fo montreal IT'S THE GREATEST I have tried a lot of smoked meat restaurants...pete is the best period
What does the rig weigh in at?
it use to weigh 13 LBS with the emag frame, I guess it be around the same thing
do you have a ghillie?
YES...and I made one for the gun
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00162.JPG
olinar
08-27-2008, 11:47 PM
That thing is awesome!!
One question:
How many people crap themselves when you pull that out of your gearbag and load up.
ThePixelGuru
08-28-2008, 01:17 PM
That thing is awesome!!
One question:
How many people crap themselves when you pull that out of your gearbag and load up.
I'm guessing a lot - I had a mask with metal spikes on it, and I swear I won 75% of games in the staging area. People really need to pay less attention to appearances and just go play, but it sure is funny when you figure out how it works and start messing with people. :D
GRimm
08-29-2008, 08:42 AM
Very sick man, makes me want to skip work today and play some scenario ball.
bronco_85
08-30-2008, 06:52 PM
thanks
Bagheera
08-30-2008, 11:25 PM
Sweet *** gun, nice mod work. You do all your own milling?
MrBlack
08-31-2008, 12:06 PM
That is bad ***!!! What parts did you use??
bronco_85
08-31-2008, 08:47 PM
Sweet *** gun, nice mod work. You do all your own milling?
well...I did not mill anything ..I used a file, metal saw ...and a lot of patience
That is bad ***!!! What parts did you use??
basicaly is a tac-one with a long bow kit plus some goodies..but for the m-16 ''lower receiver'' i used a standard double trigger frame and a BT m-16 mag
http://milsimmodshop.com/gallery/albums/userpics/normal_DSC00361~0.JPG
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.