View Full Version : Male/Female Straight SS hose fitting - where do I find it?
Where can I find a 1/8 male to 1/8 female straight SS hose fitting? I need one for a special project of mine. Thanks!
LegumeOfTerror
04-20-2008, 10:06 AM
you can get brass ones at a hardware store.
Not in Brazil :rofl:
Any on-line dealer recommended? I've tryed searching Action Village, ASP, Viewloader and MacrolineGuy. Thanks!
Like this one?
http://i70.photobucket.com/albums/i83/mannsports/IMG_3018.jpg
pps ( palmer pursuit paintball)
hardware fitting like the one at ace are not recommended for mag useage, they are usually rated for medium pressure and not high pressure.
Like this one?
Exactly. This should give me enough clearance to do what I need. Maybe I would need to buy two of them to make sure.
Found it at Palmers:
http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&products_id=12&zenid=f782d2e985ba110fe268084dd7c96f80
Thanks, PK5! Although they say 1500 psi max so 850 shouldn't be a problem.
Found it at Palmers:
http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&products_id=12&zenid=f782d2e985ba110fe268084dd7c96f80
Thanks, PK5! Although they say 1500 psi max so 850 shouldn't be a problem.
that says female to female. not male to female like you orginally posted :confused:
that says female to female. not male to female like you orginally posted :confused:
Ooops... Sorry, you are right. Here's the correct link:
http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=1_10&products_id=13
Ooops... Sorry, you are right. Here's the correct link:
http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=1_10&products_id=13
That looks exactly like the one I have. I buy them local for ~1.00 ea. lmk if you want some
That looks exactly like the one I have. I buy them local for ~1.00 ea. lmk if you want some
Yes, I would like to get two of them if possible. I also would need one or two 90* ones. Can you quote shipping to Brazil? ZIP code is: 01408-000. Thanks.
does the color/finish matter on the 90s?
does the color/finish matter on the 90s?
I would preffer to have all black fittings. If not available, then brass or nickel are good enough. Only important thing would be that they're all the same colors.
Thanks!
Just make sure that the max psi is 1500 or if they said the fitting is rated for high pressure. If it is rated for medium pressure you are running it at a risk. I bought some medium pressure before and it didn't work too well (threading require too much loctite to seal - didn't even work with teflon).
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.