warp left ule body and qloader questions

[dstud2000]

I am thinking of getting a warp left ule body for my mag and running a qloader directly connected to the feed on the body. Has anyone done this, and how did it work out for you? Also I have tried finding a pic of one but am coming up empty handed, so if you have one would you please post it up. Thanks

[d4m4don3]

I am thinking of getting a warp left ule body for my mag and running a qloader directly connected to the feed on the body. Has anyone done this, and how did it work out for you? Also I have tried finding a pic of one but am coming up empty handed, so if you have one would you please post it up. Thanks

You didn't search hard enough there's lots of mags with that config.
1 that I can think of is in one of the motm threads. I believe loguzzy had a gun setup that way.

[Smoothice]

I have a warp left body if you decide to go that route. PM me if interested.

[MournBlade]

I did it on my e-mag with warp left.

[Beemer]

Dont forget the rail has to be notched for the warp body. It will work fine. No pics but I run warp feed direct to warp left body with no issues. The Q will work fine as well.

[secretweaponevan]

I have heard that a warp right will work better with a q-loader. I saw it on MCB in this thread:

http://www.mcarterbrown.com/forums/air-gun-designs/38200-q-mag-what-do-you-guy-think.html

In this pic, the hose had to be routed the long way into the warp left.
http://img29.picoodle.com/img/img29/4/4/20/f_IMGP0003m_216e695.jpg (http://www.picoodle.com/view.php?img=/4/4/20/f_IMGP0003m_216e695.jpg&srv=img29)

Best of luck.

[code_red]

If you get a CMS you can mount it to run right or left. I've heard some bad things about running direct. If you do it, you'll probably have to lessen your prewinds on the pods. Or the paint will bust when you connect your pod to the socket, due to the pressure.

[ManInBlack]

Here's mine. Very tight...

http://i121.photobucket.com/albums/o234/CrashInBlack/QMag0073ps2.jpg

http://i121.photobucket.com/albums/o234/CrashInBlack/QMag0078.jpg

http://i121.photobucket.com/albums/o234/CrashInBlack/QMag0070.jpg

[pk5]

depending on where you are going to mount the loader.

Warp right work best for a q loader with standard mount though.

Or a warp left is do able if you are going to mount it into a foregrip instead of the emag battery thumb screw.

In the picture above the hose have to be wrap all the way around because the standard mount is mounted into the battery thumb screws and there is no one short of changing that.

Even with the CMS it will look a bit funky and not as tight as above, even though i am going to give the CMS a try soon after my game is over this weekend.

And oo that barrel is 18", long i know, but it look nicer with the q loader and plus i can stick it through holes / bushes without any problem.

[Ruler_Mark]

<a href="http://modmymag.com/images/euro/IMG_0511.jpg"><img src="http://modmymag.com/images/euro/IMG_0511.jpg" width="600"></img></a>
<a href="http://modmymag.com/images/euro/IMG_0512.jpg"><img src="http://modmymag.com/images/euro/IMG_0512.jpg" width="600"></img></a>

[Warwitch]

Yup, mine are run like Ruler's. To the inside on a Warp plate.

http://img221.imageshack.us/img221/4979/cqbtacxy0.jpg



Its way easier to load/unload Qpods with a forward facing setup.

[jade_monkey07]

I think he meant to mount it with NO Hosing at all. by looking at maninblack's pictures moving it back a few inches would line the warp hole up almost perfectly with the qloaders "output"

[skyless]

I had my qloader set up that way, found it hard to keep it from moving around once it was in place. i use some pvc and sanded it down so it fit over the feed tube and inside the qloader, looked cool but never got it to work great. best of luck.

[dstud2000]

I think he meant to mount it with NO Hosing at all. by looking at maninblack's pictures moving it back a few inches would line the warp hole up almost perfectly with the qloaders "output"



Yes that is what I am referring too.