Lukes RNC 12 round feed tube mod.

[luke]

Update 9-28-09

These are currently in stock.
************************************************** ************************


This mod will work with all AGD stainless steel bodies.
The only ones I won't do are those that I have already modded with my vert or warp feedtube mod.

Note:
I do NOT sell bodies, this is a mod service only.




Feed tube mod is $65
Does not include an end cap or powerfeed plug.
These tubes hold 12 rounds.

http://i149.photobucket.com/albums/s49/mistahchao/DSC04326.jpg



RNC mod with spring feed machining $105
Includes spring slot and loading hole machining.
Does not include an end cap or powerfeed plug.

Machining matches the AGD Sidearm specs.
Spring slot is machined on left side as shown in picture regardless of body type. (PF left, PF right or Vert)

Tube holds 8 rounds.

http://www.lukescustoms.com/Page27_Misc_Parts_Services/rnc_spring_feed.JPG






Factory feed tubes are silver soldered, mine are T.I.G. welded.
This mod will ruin the current finish around the feedtube, it will need refinished.
Refinish prices listed are for purchases with the feedtube mod.

Raw- No charge
After the mod is completed, the welds are smoothed over and surrounding area is cleaned up.

Bead Blasting $15

Polishing $27

Powder coating, Matte Black $25
If you want your body powder coated you must also send in your rail.
I do not powder coat the underside of the body because of tolerance issues, I need the rail to use as a guide to tape the body off for the powder coating.

Also, if you are getting the powder coating please send in your end cap so I can use it to tape off the end of the tube. If it is powder coated the end cap will not fit.

PM me for an invoice.

[chairman_mao]

Just to be clear this mod only includes the 12 rd tube not the end cap? And if the body will be bead blasted do you still need the cap?

[luke]

Just to be clear this mod only includes the 12 rd tube not the end cap?

I do not supply the cap or power feed plug.


And if the body will be bead blasted do you still need the cap?

I only need the cap for powder coating.

[chairman_mao]

PM sent

[luke]

Invoice sent. :cheers:

[chairman_mao]

You have been paid my good man. :cheers: Should I send the body along now or would you prefer I wait until you close the pre-orders?

[flyingpootang]

Nice Matt, I'll send a money order in. Please pm me your address...

[cyberave68]

Will you do a minimag body also???? (Sorry i have to ask?)

[jay8541]

Very nice Work I will PM you later :cheers:

[luke]

You have been paid my good man. :cheers: Should I send the body along now or would you prefer I wait until you close the pre-orders?


Send it right away.

[luke]

Nice Matt, I'll send a money order in. Please pm me your address...


PM sent

[luke]

Will you do a minimag body also???? (Sorry i have to ask?)


Any stainless steel body is OK.

[luke]

Very nice Work I will PM you later :cheers:


Thanks

[jay8541]

PM sent :shooting:

[flyingpootang]

Matt, Put me down for another a total of 2. I will send them in shortly one is out being pump milled.....Thanks

[luke]

Both with a raw finish?

[flyingpootang]

Both with a raw finish?

Yup, both raw. Can you send me a new invoice...Tganks

[luke]

You bet.

[robnix]

How much longer on this? I have a classic coming in via UPS next week.

[luke]

A few weeks..

[CLEARUSH]

should post this on MCB also there are few that would go nuts for this.

sending my pm here shortly.

[PumpPlayer]

PM sent.

Very excited for this one.

My P-Mag never sees much use because, as nice as it is, I just don't like playing with a hopper. But with this? Oh yeah... :cool:

[luke]

should post this on MCB also there are few that would go nuts for this.

sending my pm here shortly.

I'm not a member so i don't know the rules. Do they allow dealer posts like this?

[flyingpootang]

Matt, I already posted it in the sidearms section on MCB. They also have their own airsmith section. http://www.mcarterbrown.com/forums/airsmiths-mcb/

[mr doo doo]

http://i149.photobucket.com/albums/s49/mistahchao/DSC04326.jpg

this mod is a necessity if you play with this kind of style. Not only is it professionally done, but that is what luke's known for. :cheers:

[luke]

Matt, I already posted it in the sidearms section on MCB. They also have their own airsmith section. http://www.mcarterbrown.com/forums/airsmiths-mcb/

I can't find the sidearm section, (:tard: ) can you give me a direct link? Thanks.

[luke]

mr doo doo,

Do you mind if I use that picture?

[mr doo doo]

mr doo doo,

Do you mind if I use that picture?

not at all. cant take more without the 12 gram if you want.

[flyingpootang]

I can't find the sidearm section, (:tard: ) can you give me a direct link? Thanks.

It's under the Armory/sub forums: http://www.mcarterbrown.com/forums/sidearms/
I would contact Carter himself and get set up under the Airsmith's section: http://www.mcarterbrown.com/forums/members/painthappy.html

[paintball72]

dang when i dont have a ss body to spare. :mad: looks like great work as usual luke :clap:

[luke]

not at all. cant take more without the 12 gram if you want.

Thats OK, I like that one. :)

[luke]

looks like great work as usual luke :clap:

Thanks. I been wanting to do this one for a few years now. :)

[Arlo]

Damn, that looks nice. :D

Excellent work my friend. Very nice, you wouldn't happen to make those for vertical feed cockers would you?

[luke]

Damn, that looks nice. :D

Excellent work my friend. Very nice, you wouldn't happen to make those for vertical feed cockers would you?


No, these are TIG welded to the body, (as far as I know all Cockers are machined from aluminum).

[GroovYChickeN 2.o]

pm'd you

Also can you fit an eclipse splash kit site rail on a body with this mod?

[luke]

pm'd you

Also can you fit an eclipse splash kit site rail on a body with this mod?

Can you get me a picture of the site rail so I can make sure it is what I think it is?

If you get your payment in right away I can make one that sits out far enough so it will.

[flyingpootang]

Matt, I received 1 of my bodies, but I'm still waiting for 1 more (3-5 days out) from rainmann229. LMK if your getting close to the cut off date....Thanks

[luke]

I suggest you pay for however many you want done so I can get a count. You can send the bodies when you're ready.

[onedude36]

pm'd you. im really excited.

:clap:

[luke]

pm'd you. im really excited.

I never got it..

[luke]

Quick update:

I have my materials and plan on getting started on them tomorrow. (Sunday 1st)

:cheers:

I'm making a few extras so this is not cut off yet.

[flyingpootang]

I'm sending 2 of mine in on Monday.

[onedude36]

re-Pm'd you lol

[luke]

Got a good start on these today. I hope I can finish them up over the next few evenings. :cheers:

[luke]

Made some good progress on the feed tubes this afternoon.

Pre order will be closing pretty quickly, pricee will increase on these after I close pre order.

[Twistedpsyche]

They look great.
Crap, I wish I still had that MM body so I could send it to you.
I'll have to see if I can dig one up.

[luke]

Looks like the tubes will be done tomorrow afternoon. Pre orders will close as soon as they are finished. If you are sending a body in with a money order you will still be on the pre order price list. :cheers:

[PumpPlayer]

I've been held up but I promise I'll get to the post office today to send this out. My appologies for the delay.

[luke]

No worries, I can deal with yours when it comes in. When it comes to the instal there's no way to do them in a production fashion anyway. The tubes will be done and waiting. If you've paid, your tube(s) are reserved. From on out this will be treated as all other custom work, I'll get done as the bodies come in.

[luke]

OK, these are done!

PRE ORDERS ARE NOW CLOSED.

[devildog]

mr doo doo- can you tell me where you got the 12gram mod done? also where to get the power feed plug and cap? thanks.

[mr doo doo]

mr doo doo- can you tell me where you got the 12gram mod done? also where to get the power feed plug and cap? thanks.

it's actually not a mod, but a real piece. i was lucky to find a horizontal ASA (made from AGD i guess...) that goes in the front, instead of the typical vertical ASA. That way, i was able to screw in a 12 gram changer in that position. i believe someone modded a regular ASA to fit in the front; the instructions can be found near the end of the "Automag Picture" thread.

the powerfeed plug i already had with the body (if you need one, talk to MANN, he has a few), and the end cap i purchased from wevopaintball.

luke, good to see the mod coming along well. took mine out to the field last weekend, and everyone could stop staring at it. was easier to aim and load than the last setup i had... Thanks again man! :cheers:

[luke]

luke, good to see the mod coming along well. took mine out to the field last weekend, and everyone could stop staring at it. was easier to aim and load than the last setup i had...

Cool, glad to hear people took some notice to it. :)

[luke]

NOTICE

There are lots of unpaid pre order invoices for this mod. I'll honor all outstanding invoices for 10 days. Payments must be made by June 15th to secure your discount.

Thanks

[Twistedpsyche]

Oh I will be doing this soon!!

[PumpPlayer]

I thought it was worth reporting that my wife (a 'Mag shooter herself) just called me up and told me that my bodies had come back in.

"Is there something wrong?" I asked.
"No." She said, "They look great."
"But I shipped them out three business days ago..."

That's right. Luke got a cross-country shipment at his doorstep somewhere around mid-day Friday, immediately cleaned up, preheated, TIG-welded, cleaned again, and finished two bodies, then immediately shipped them out the next morning on a Saturday.

No kidding here, less than five days. :wow:


No pictures until I get home from work but I'll get them up ASAP.

EDIT: I promised a pic so here ya go:

http://img46.imageshack.us/img46/3906/p1010295mb1.jpg

This is really great work, Luke.
I appreciate this and I'll be sure to take it out on the field real soon! :shooting:

[luke]

Cool, thanks for the complements and pictures! Looks sweet. :cool:

[shives007]

I can't even begin to say how bummed I am I didn't have a spare body laying around :( :( :(

Shives

[Twistedpsyche]

These are still in stock. ;)

Excellent. PM'd ya about getting one!!!

[CLEARUSH]

Yes there is actualy a dealers section in the BST section over on MCB. I'm unsure but I do not think there is any fee associtated with the section, but the mods come down with a hammer if your not a dealer/customizer and try to just post regular sales in the Dealer sections, so you would be OK. There are several MCB members that recomend your work when it applies.

[luke]

I can't even begin to say how bummed I am I didn't have a spare body laying around :( :( :(

Shives


There has been some confusion to my first response to this. When I said "I still have some in stock" I meant that you still had time to locate a body. Several people have taken it to mean that I was selling bodies with the mod, which is not the case. My bad, sorry for the mix up.

[splatterbrain]

Luke, do you know where I can pick up an end cap for this mod? Also is there any kind of spring in this feed tube or is it a gravity feed ?

[luke]

Luke, do you know where I can pick up an end cap for this mod?

See post #52 in this thread.


Also is there any kind of spring in this feed tube or is it a gravity feed ?

Like the name indicates, this is a "rock n cock" feed neck. No springs..

[nobloodloss]

NOTICE

There are lots of unpaid pre order invoices for this mod. I'll honor all outstanding invoices for 10 days. Payments must be made by June 15th to secure your discount.

Thanks
Luke, can I hyjack one of those unpaid preorders so that I can get the discount?
And the body I'd be sending in isn't modded for a pump kit yet, so would Rainman229 have problems doing the pump slot after the stock feed is welded on?
Say yes yes?

[luke]

luke, can I hyjack one of those unpaid preorders so that I can get the discount?

Sorry, I have 5 left and they are $65 each. I have a ton of work in these for a very small profit, even at $65.

I don't know if I'll be doing another run even at the current price. I hate not to because people are diggin them, so it's still up in the air. Sorry no discounts on the last few.


And the body I'd be sending in isn't modded for a pump kit yet, so would Rainman229 have problems doing the pump slot after the stock feed is welded on?

I don't know how is jigging the bodies up for machining. You may want him to take a look at the modded bodies before you commit.

[nobloodloss]

Alright Luke. $65 is good, I'm even thinking about adding the bead blast, and polish, but let me check with Claudio first. I'll get back to you as soon as I hear from him. Thanks.

[shives007]

Aaaaacccckkkk!!!! Need to find an extra body. Hell, a whole extra Mag would be nice too.

Shives

[luke]

I sent 2 invoices out that I am waiting for payment on, so that leaves 3..

[nobloodloss]

I sent 2 invoices out that I am waiting for payment on, so that leaves 3..
Paypal it is Matt. Thanks.
Remember that Rainman229 will be sending out te body, not me. It might take a few days... Maybe a couple of weeks. So don't take any vacations ATM.
( ;
JK Bro

[luke]

Sounds good. :cheers:

[nobloodloss]

Rightcheous! :clap:
:cheers:

[Twistedpsyche]

Got mine back over the weekend. Very fast turn around and looks great!!

[nobloodloss]

Got mine back over the weekend. Very fast turn around and looks great!!
:cry: No pictures?

[Twistedpsyche]

Sorry, don't have it together yet. :)

[nobloodloss]

Mine's making it's way from Rainman to Luke. Hopefully I'll see it before the end of July. Hopes. Yea.

[james5]

Beautiful job on the body !!!!!
Sorry she's not real pretty looking yet, but that will come later.
Thanks :bounce:
http://i286.photobucket.com/albums/ll89/james555-2/ImportedPhotos00182.jpg

[nobloodloss]

Beautiful job on the body !!!!!
Sorry she's not real pretty looking yet, but that will come later.
Thanks :bounce:
http://i286.photobucket.com/albums/ll89/james555-2/ImportedPhotos00182.jpg
Ah! Sane's making me a hickey stock. He found me a Stealth.

[luke]

nobloodloss, your automag body is done and ships Tuesday. :)

[nobloodloss]

nobloodloss, your automag body is done and ships Tuesday. :)
No friggin way!!! How did all this happen soooo fast.
I hate the Rainman for being so awesome... I may have to same some of that for you too Luke. Why did you have to be so damn good bro? You make me feel... Make me feel? Well you know :)
:cheers: and a big TY

[luke]

:cool:

[zipity_Bop]

are these still avail?

why can it not be done with aluminum?

[luke]

are these still avail?

I believe I have 3 left.


why can it not be done with aluminum?

These are made out of stainless steel specifically for the stainless bodies. Stainless can not be welded to aluminum. There are plenty of aluminum tubes on the market that can be used with the aluminum body.

[pk5]

hi luke

can you weld these to brass body? The palmer typhoon nasty to be more specific.

Thanks

[nobloodloss]

Luke. You may want to consider getting these one piece feeds in various metal types, lol.

[chairman_mao]

There is no reason to do these in aluminium because one can simply tap their body and use the standard Phantom feed.

[nobloodloss]

There is no reason to do these in aluminium because one can simply tap their body and use the standard Phantom feed.
Then it wouldn't be a one piece.

[luke]

hi luke

can you weld these to brass body? The palmer typhoon nasty to be more specific.

Thanks

Sorry, no.

[luke]

Luke. You may want to consider getting these one piece feeds in various metal types, lol.

There are options out there for the other bodies. ;)

[kokak]

Luke...

I am waiting to receive a MINIMAG I just bought that I will be turning into a PUMP MAG. Can I get this done and have it Polished extra shiny?

I can prepay right away!

[luke]

PMed you..

[nobloodloss]

Just a tease... You said, "shiny"? How's translucent?
http://img.photobucket.com/albums/v234/splattttttt/P1010001-6.jpg
http://img.photobucket.com/albums/v234/splattttttt/P1010003-4.jpg

[kokak]

WOW!!!!!

:wow: :wow: :wow: :wow:

Money sent... I will forward my address when I send the body...

[luke]

Very cool pump setup! I would like 10 markers just like that. :)


Just a tease... You said, "shiny"? How's translucent?

http://img.photobucket.com/albums/v234/splattttttt/P1010003-4.jpg

[nobloodloss]

You can have hald the credit Luke. The other half belongs to Rainman229.

[luke]

It's not just the feedtube, it's the whole package. If I were to build 1 (or 10) that's exactly what i would go for, clean simple and polished! That's why the Automag has always been my favorite marker. :D

[flyingpootang]

It's not just the feedtube, it's the whole package. If I were to build 1 (or 10) that's exactly what i would go for, clean simple and polished! That's why the Automag has always been my favorite marker. :D
Yup for me too. Number 2 is just around the corner....
http://img2.putfile.com/thumb/7/20221390140.jpg (http://www.putfile.com/pic/8472011)
http://img2.putfile.com/thumb/7/20221390178.jpg (http://www.putfile.com/pic/8472010)

[luke]

Very cool, thanks for the pictures! I love to see what you guys are doing with these. :cool:

[nobloodloss]

Yup for me too. Number 2 is just around the corner....
http://img2.putfile.com/thumb/7/20221390140.jpg (http://www.putfile.com/pic/8472011)
http://img2.putfile.com/thumb/7/20221390178.jpg (http://www.putfile.com/pic/8472010)
I once had a Micro Mag I wanted to turn into a pistol such as yours. Now that I have Lukes one piece SC body, I want to go for it. It will be the only semi a shall play with. One problem though... Just how did you get that bucket changer on there? :hail:

[flyingpootang]

Just how did you get that bucket changer on there? :hail:

I used a male to male brass 1/8" pipe thread adapter to attach the RT asa to the valve. You can find one at your local hardware store. From end to end it's about 1". I used red loctite so it wouldn't move. ...

[kokak]

Luke...

I know it's been very delayed but I just sent out the Mini Mag body for the Mod. I paid the same day that you sent me the Invoice.

If there is any confusion let me knwo...

[nobloodloss]

I used a male to male brass 1/8" pipe thread adapter to attach the RT asa to the valve. You can find one at your local hardware store. From end to end it's about 1". I used red loctite so it wouldn't move. ...
Did you file down the top grooved section? The screw treads at the top? Did you plug it with anything, or did you leave it open?

kokak, I wouldn't worry about Luke. It's possible he may have been busy with something, and confusio... Yes, that can happen, but he won't abbandon you. He did mine fast, because my karma was high that week.

[luke]

Luke...

I know it's been very delayed but I just sent out the Mini Mag body for the Mod. I paid the same day that you sent me the Invoice.

If there is any confusion let me knwo...

I have not received your package yet, but I have your paid invoice and a reserved feed tube set a side. :cheers:

[Bagheera]

These mag pistols are total sweetness.

Luke, do you do a mod the same way that accepts 10 round feed tubes? I was thinking of putting a Phantom feedneck on a Mag body, with Noxx's 10 round spring tube (the plastic ones) that way I can have the somewhat-of-a-clip action going. However, I'd rather have you mod it like this if it isn't too much trouble.

Where can I find a short short Mag barrel that isn't cocker threaded? (the old school mag barrel kind)

[luke]

Luke, do you do a mod the same way that accepts 10 round feed tubes?

I don't sorry.


I was thinking of putting a Phantom feedneck on a Mag body, with Noxx's 10 round spring tube (the plastic ones) that way I can have the somewhat-of-a-clip action going. However, I'd rather have you mod it like this if it isn't too much trouble.

You'll have to dig up some good pictures to shouw me how the set up works before I can decide either way.



Where can I find a short short Mag barrel that isn't cocker threaded? (the old school mag barrel kind)

There should be a ton of them around in the buyer/trader forum.

[luke]

bump

2 left

[that one guy]

count me in for one if you still have them!

[luke]

Both are spoken for as of today, I'm waiting for payment.

[luke]

One left, currently waiting for payment..

[luke]

I didn’t have plans to do another run but several people have inquired. If I can get a few guys to prepay I'll do a run. Really it's just to cover the cost of materials, it's pretty pricey. It will take 2-3 weeks to order material, manufacture the tubes and do however many bodies are pre ordered. LMK.

[flyingpootang]

Luke, I have a vert ss body that I want to do with a spring guide cut into the side. How many more RNC do you need to do another run?

[luke]

I'll send you a pm.

[C_losjoker]

luke,

id be interested, are you still taking orders.
thanks

[luke]

luke,

id be interested, are you still taking orders.
thanks

I'll put you on the list.

[luke]

Update 5-4-09
Materials ordered, but on "back order".

[luke]

Update May 8th
Received materials today but they sent the wrong stuff.
Order has been corrected and reordered.

[CaptainNeeda]

pm sent!

[luke]

Anyone that wants in can still do so. Just PM me with your order, please include what type of finish you want.

[KC]

I see a few people asking where bodies can be purchased. So im posting a few here to make it easy. All prices are shipped and ill do $5 bucks off any body if your sending it to luke. Also willing to direct ship to Luke if need be. (thanks again for the space Luke)

<a href="http://i53.photobucket.com/albums/g80/DarkBlueBlaZeR2/Sale%20Thread%209/P1010023.jpg"><img src="http://i53.photobucket.com/albums/g80/DarkBlueBlaZeR2/Sale%20Thread%209/P1010023.jpg" width="600" height="450"></img></a>
1 Powder coated Body $15 shipped
3? Black Emag Body power feed right. $20 shipped
3 Minimag Body $35 shipped
4 Black Emag Body Power Feed Right $25
5 Black Emag Body Power Feed Right $25
6 Minimag Body $35 shipped
7 Silver Center Feed Body. $40
8 Automag Body hopper right. $20

Please PM me rather then posting here and cluttering up Lukes thread. ;)

[luke]

Update May 19th
Production is underway on the RNC tubes!

[that one guy]

Sweet!

[liquid_sunshine]

Any chance you have any more of these available? I have a standard tube I'd like to send in to you... let me know thanks! These Mag-pistol-horiz-feed looks sick... and I'd love to get setup for this summer's PB season with this!

[Dend78]

Update May 19th
Production is underway on the RNC tubes!

glad to hear it i was getting a lil antsy lol

[luke]

Any chance you have any more of these available? I have a standard tube I'd like to send in to you... let me know thanks! These Mag-pistol-horiz-feed looks sick... and I'd love to get setup for this summer's PB season with this!


YES.

Just PM with your order. Make sure to LMK what finish you want.

[luke]

glad to hear it i was getting a lil antsy lol


Sorry about that. They are a little more than 50% done. I'm doing a production run so the whole job will take longer. Plus I have all the individual orders to take care of. SO, all I can say is we are getting close. No ETA though. :)

[RedEyes]

picture logs!?!?! lol

[luke]

Here's where I'm at.

Have to finish the welding (currently just tacked)
Two machining operations left.
Clean up and deburring.

http://i550.photobucket.com/albums/ii405/mtumbleson/RNCProd.jpg

[luke]

WELDING IS DONE!

:cheers:

[that one guy]

:cheers:

They are looking nice!

I saw a mag with a wood stock and a wood pump and it looks like one of your RNC feeds on ebay this morning. It ended already but I think in the questions they said they won it at pump pandemonium, is it one of your works?

[luke]

:cheers:

They are looking nice!

I saw a mag with a wood stock and a wood pump and it looks like one of your RNC feeds on ebay this morning. It ended already but I think in the questions they said they won it at pump pandemonium, is it one of your works?

I don't know. I would have to see the listing...

[that one guy]

I didn't think to save it, but it was nice, sooooooo., I'll Say you did it! ;)

[that one guy]

Pump Mag Ebay (http://cgi.ebay.com/Custom-Automag-Pump-Gun-autococker-palmers-carter_W0QQitemZ290317532373QQcmdZViewItemQQptZLH_ DefaultDomain_0?hash=item439845fcd5&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50)

Here it is, found it in my history, I like that it says you can live the life of a paintball celebrity!

[luke]

I'm pretty sure that is a body i did. I don't think anyone else has done a feed exactly like i do mine. :)

[that one guy]

I am not one to say about the wood, but the feed is nice. I just thought it was kinda neat see it.

[luke]

I am not one to say about the wood, but the feed is nice. I just thought it was kinda neat see it.

Yea, I love to see what people out there are doing with the mods I do for them. I normally don't get the see the finished project, just the parts.

That was pretty cool, not something I would build for myself, but still cool. :)

[luke]

Finished up one of the machining operations today.

These are about done. :)

[RedEyes]

Finished up one of the machining operations today.

These are about done. :)


mine?!?!?! haha glad to hear the progress going smoothly beside the wrong materials.

[luke]

When I say I’m about done, I mean the production is about finished, your individual orders still have to be taken care of. ;)

[that one guy]

I can't wait! :shooting:

[luke]

Production is done. :dance:

"wknight" and "that one guys" bodies are done and will ship wed 27th. I'm waiting for one thing or another on everyone else.

:cheers:

[that one guy]

And I don't have to wait!!!!! I am excited already!

[luke]

And I don't have to wait!!!!! I am excited already!

PKGs were sent this morning. :cool:

[that one guy]

I came home from a long day of work yesterday and what was sitting on my counter??? A box of pure sexiness! Thanks luke I love it, I put it on and will get a pic after work today!

[luke]

Cool! Post your picts here...

[nobloodloss]

http://img.photobucket.com/albums/v234/splattttttt/P1010001-6.jpg
http://img.photobucket.com/albums/v234/splattttttt/P1010005-1.jpg
http://img.photobucket.com/albums/v234/splattttttt/P1010004-3.jpg

[luke]

Very nice set up!

That's something I would build for myself. :cool:

[that one guy]

<a href="http://www.flickr.com/photos/happyhippyj/3581768272/" title="IMG_2053 by happyhippyj, on Flickr"><img src="http://farm4.static.flickr.com/3636/3581768272_9128defb09.jpg" width="500" height="375" alt="IMG_2053" /></a>

<a href="http://www.flickr.com/photos/happyhippyj/3580957289/" title="IMG_2051 by happyhippyj, on Flickr"><img src="http://farm3.static.flickr.com/2438/3580957289_0b06f8b166.jpg" width="500" height="375" alt="IMG_2051" /></a>

Not so hot photography....

[luke]

Update:
I've added a spring feed mod to the RNC tube, see first post in this thread.

[luke]

up