Stormwalk Frame Pneu'ed

[BenoitOWN]

Hi,

I contacted jay8541 to do another run of those frame. He is willing to make it if I order a minimum of 10. I would like to know how many would be interested in buying one that would already be pneu'ed. As for the price it is not set yet but it will be a couples hundreds for a completed one.



The design will be change a little from the original, I don't really think I will ''customize'' each order for people. Will be the same for all 10 as I want to keep the run the lowest possible. It may be a more compact style than the original. There are still some little details to finish about it.


The Pneu won't be done by jay8541 but the body will be pre-made for the one that I will install inside.


I am waiting for other party to reply on some parts that will be included. I will let you guy know what will be inside



This time there is a chance that I could get a trigger designed for it.(Was not included in the last run)

It will be anodized black.(Was not included in the last run)

It will work with both the regular valve or the reverse valve.

Designed to use e-mag style rail but can fits other rail but keep it mind that it fits the e-mag rail better.

I will look about including the air fitting in the lots(4 x 90o and 2 x 1' black macroline and 1 plug). The asa won't be included. The number of 90 degree fitting include the asa and valve.

I will include a pneukit. I have contacted someone. Will be assembled inside before shipping

I will include a regulator. I will contacted someone to get the best price.



A good feature about this is that everything is inside the frame, your opponent won't notice that you got a beast inside. He will think it some sort of ''expension chamber or air thru grip''.



I am the person that will sell those frame, install the pneu parts and I will be the shipping point.


My minimum order is 10 I could ask for a little more if you get in the pre-order. I will set the price at 100$ deposit/ea and the other parts will be due after they are ready to ship.


I will do the pre-order thread after I get a response from some people I have contacted and that I have the potential buyer.


The original stormwalk frame picture:

http://i68.photobucket.com/albums/i15/jay8541/Trigger%20frames/Picture852.jpg

This will be the last really last run of that frame.


Just to keep a track of it:
1- BenoitOWN Confirmed to have one
2- Swiss Cheeze(Received a pm for interest) AO
3- wetwrks(Depending on price) AO
4- splashkitsrock420 MCB
5- seekandestroy78(Depending on final design) AO
6- chplnstone(Depending on price) MCB
7- Epic_Scotsman(Depending on price) MCB
8- ravenlord(Depending on price) MCB
9- Mouse(Depending on price) MCB
10- DarkNinja(Depending on price and design) MCB
11
12-
13-
14-
15-

Special order(If I get my 10 order filled):
1- mag79 (Interested in 2 raw frame - original for now) AO

[mag79]

I love these things but by the looks of it they weren't that popular after they were sold. They were resold for nearly nothing. I emailed Jay a few hours ago about this frame because I want 2 more

I would buy 2 raw with nothing in it

[doc_Zox]

I liked the i Frame:
http://premium1.uploadit.org/docZox//iFrame.jpg

[chafnerjr]

I love these things but by the looks of it they weren't that popular after they were sold. They were resold for nearly nothing. I emailed Jay a few hours ago about this frame because I want 2 more

I would buy 2 raw with nothing in it

Yea no kidding... same seemed to happen to the airwalk... That just means I'll be one of very few rocking my v2 :D :D :D

If I didn't already have an airwalk I'd be all over this!

[BenoitOWN]

If I get the interest in the main order, I will look forward with him in getting those 2 raw if it possible.

You may want to wait that I get the new design finish as there is some new features and maybe more compact.

[wetwrks]

Depending on the price, I may be interrested in one.

[BenoitOWN]

Question for the potential buyer, would you like to have the air fitting all black(not including the plug) that could cost a bit higher or normal nickel plated?




Added an interest section to keep a track of people.

[wetwrks]

Question for the potential buyer, would you like to have the air fitting all black(not including the plug) that could cost a bit higher or normal nickel plated?

Black might be cool.

[Ruler_Mark]

I liked the i Frame:
http://premium1.uploadit.org/docZox//iFrame.jpg


do that deisgn ill be in for 1

[BenoitOWN]

I don't really think it will be that design sorry.

http://i68.photobucket.com/albums/i15/jay8541/Trigger%20frames/airwalkoneagdspecd_ver3.jpg

It may look something like this(This was done before the pneu parts, will be refined soon if I have the demand in it)



Built-in rail for asa.


I am looking forward with him to see if the reg will fit that space.

Other feature maybe that I would add, im still thinking about it.

I get a trigger designed along this one actually, that is a part that you guy can discuss about but I get the final decision.

[wetwrks]

I don't really think it will be that design sorry.

http://i68.photobucket.com/albums/i15/jay8541/Trigger%20frames/airwalkoneagdspecd_ver3.jpg

It may look something like this(This was done before the pneu parts, will be refined soon if I have the demand in it)



Built-in rail for asa.


I am looking forward with him to see if the reg will fit that space.

Other feature maybe that I would add, im still thinking about it.

I get a trigger designed along this one actually, that is a part that you guy can discuss about but I get the final decision.

Have you thought about having the front of the frontblock follow the same lines as the inside front of the trigger guard?

[Ruler_Mark]

that foregrip/lpr housing is just too short imo to be a usefull hold

[chafnerjr]

that foregrip/lpr housing is just too short imo to be a usefull hold

I was just about to say the same thing... looks very short... looks really good, but possibly hard to hold when snapping around a corner.

[Ruler_Mark]

imo i would make it longer so it is the same floor as the stormwalk frame, and not have the metal conenct at the bottum of the trigger guard to the foregrip

[snoopay700]

I liked the i Frame:
http://premium1.uploadit.org/docZox//iFrame.jpg
Damn, i think i'm gonna have to see about getting one of those made now. Now i just need to get in good with the guy in charge of the machines at the college i'm going to...

[seekandestroy78]

i'd sell my emag lowers to get in on one of these. let me know a final design and i will tell you yes or no.

[doc_Zox]

the i Frame was a cool Idea
Routing the internal air passages makes it a pretty clean set up for the air to the valve:
http://premium1.uploadit.org/docZox//iGun.jpg

[snoopay700]

Yeah, that's what i really like about that design, plus there isn't anything that's shown up like that other than the spacemags really, so it would be cool to do.

[doc_Zox]

another cool mod would be an automag pneumag broom handle:
http://www.a-human-right.com/RKBA/c96-1.jpg

[TwilightG]

Be careful... I know that a few members here will do custom one-off pneu installs but you're talking about creating and selling a quantity of pre-built pneu-frames.

With recent discussion about patents and G-Force vs. PTP, this could easily get messy.

Personally, I'd love to own one of these if only I wasn't already waiting for the G-Force frame. :(