1/4 NPT male to 1/4 NPT male adapter?

[dark blade]

just like the title says... i need one...

a 1/4 NPT male to 1/4 NPT male adapter

i have found plenty male to female adapters in the form of elbows and such... but i need a straight fitting that i can use to attach the female end of a proline pro-connect to an ASA

someone please help me out here

[jgilk1]

i am guessing you are hooking up regulator to female line for get the adapter just get a 1/4" nipple and screw it in

this is what you are looking for

these are aluminum but have the nut in the middle to allow use of a wrench to tighten
http://www.pegasusautoracing.com/Images/L/3255.JPG

heres the link to that site
http://www.pegasusautoracing.com/bigpicture.asp?RecId=935

just do a google product search for Standard 1/4" Nipple

if your confused heres a link:
http://www.google.com/products?num=100&hl=en&safe=off&q=Standard+1/4%22+Nipple&sa=N&lnk=next&start=200

[dark blade]

That's exactly wat I was looking for actually... I couldn't find any when I searched for male to male adapters

But as soon as I typed in nipple it showed up... any ideas if I can find one of these at a hardware store so im not spending 20 bucks shipped just for 1


just like the title says... i need one...

a 1/4 NPT male to 1/4 NPT male adapter

i have found plenty male to female adapters in the form of elbows and such... but i need a straight fitting that i can use to attach the female end of a proline pro-connect to an ASA

someone please help me out here

[DevilMan]

Yes you can buy them at True Value, ACE, OSH, Home Depot, Lowes, etc...

The only thing is they are brass and not AL and the ones I've found don't have a nut in the middle of them. It's not an issue to me as you can unscrew at least one side of whatever you put on it and the fitting will stay in the other. If you have a preference on which is which then I'd loctite it maybe. Otherwise to take it off you almost bugger it up as you scratch the hell out of it with pliers.

You may be able to find a couple of thin nuts to thread on it to lock together and use that way, but I never took the time.

They can be found in the plumbing section.

DM

[jgilk1]

if you have issues with one side staying it in get a little bit longer nipple

iy you are looking for one with a nut try a speed shop there about $5

[dark blade]

got one thanks guys... i cant wait to make a sick nasty setup with this haha

[jgilk1]

you better post it up when you are finished. then pm when it's up.