View Full Version : Myth regulator with mag
Greg2230
11-12-2008, 11:54 AM
This is probably a stupid question but will my automag will run fine off of a myth regulator? I know it puts out ilke 600psi it should be fine right? Also will the myth fit in any bottle? I have a SCI bottle. Thanks
Dend78
11-12-2008, 12:45 PM
the reg will fit any of the DOT-E bottles, as far as for the mag it need the HP spring in it to put out like 800, 600 will work but not very well
Greg2230
11-12-2008, 02:10 PM
Ahh!! Thats perfect. Thanks. So if I get a myth reg and put the HP springs in it, it will work perfect with my regular mag?
michbich
11-12-2008, 09:26 PM
Ahh!! Thats perfect. Thanks. So if I get a myth reg and put the HP springs in it, it will work perfect with my regular mag?
Yes, as long as you have 800psi output or more.
Greg2230
11-13-2008, 02:48 PM
Is there a way to test the output pressure?
Greg2230
11-13-2008, 11:02 PM
I have heard that it doesnt matter if you change the springs on these cause they are made for both low and high pressure guns. I talked to someone that did change the spring and had no results. It still put out 650. Also, I cant find that spring for sale anywhere. Does anyone have actual experience with this? Anyone installed the spring and had it work fine with their mag?
secretweaponevan
11-13-2008, 11:24 PM
Is there a way to test the output pressure?
You can use a gauge. You can find them wherever paintball goods are sold.
flyingpootang
11-13-2008, 11:46 PM
I cant find that spring for sale anywhere.
You can get the springs from the manufacture. They're 10.00
http://www.guerrillaair.com/
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.