Rt, need help

[Sizzal]

I got an Rt marker. After alot of problems finally got it shooting. I just added the shims in to try to help and now it actually fires more then once. Now the problem is that it shoots about 10 or 12 shots then the trigger 1/2 depresses and starts leaking air. I searched around from any damaged or missing o rings and can't seem to find anything wrong. Can someone point me in the direction of getting this gun going again :dance:

[tweter]

it might be the piston?? I have a RT with a similar prob here this might help you out

http://www.automags.org/forums/showthread.php?t=239240

[Spider-TW]

Got oil?

What kind of air system are you using?

Where did you add shims (lvl 10 bolt)? A stock RT would not have any.

Is it shooting more than once per trigger pull AND hanging up after 10 or 12? Or is it just hanging up, now that you have it shooting?

[tweter]

also if you try this video around the 19 min mark (i belive) explains leaks and how it works

http://odeo.com/episodes/22424886-AGD-Automag-RT-Video

[Sizzal]

The problem for the most part was solved. The press was set way way high and I did not realize it(the only field near by is a 45 minute drive so I cant get a chrono everyday) The only remaining problem just may need to be tuned out(it still depresses on me after a while). thanks ya'll.