Warp/HALO combination=amazing

[Load SM5]

After trying the empty-the-hopper-into-the-140 rd-pod test with my revvy and my HALO(no contest). I decided to hold the business end of the warp feed hose over the open HALO lid and see how this thing would feed. I just held the priming button and watched it go. It was like the balls were fighting to see who could get out first! I probably ran the same paint through my hopper 3 times and just drooled at all the possibilities. I can't wait to try this setup out.

[pito189]

Originally posted by Load SM5
It was like the balls were fighting to see who could get out first!

LOL that is hillarious. Do you have some more pictures of you setup, besides the one from mardi gras. Some close up pics of it would be sweet.

[Load SM5]

I'll take some when I get home.

[RSUAVE911]

at about 4 or 5 cents a ball, thats a lot of broken guey money.

[Load SM5]

What do you mean broken paint? Never broke a ball.

[Load SM5]

Close up of the warp setup..

[Load SM5]

....

[RSUAVE911]

That is a sweet setup, I am not saying you are going to break balls, I highly doubt it with the warp. On a side note did you get the ACE installed I thought you were going to get it installed at MO.

Oh Yeah, I am just saying you will be shooting lots of paint with that combo of halo and warp, at like 5 cents a ball thats a lot of money. Understand?

[Load SM5]

Ah, got it now. No, I was going to give my gun to Tom to take back with him at Mardi Gras, and save some shipping.

He suggested I wait. They are doing more mods to the extreem-style mags other that the eye. So when they get it all figured out he'll let me know. I can send it in and get it all done at the same time.

Plus, I'm not too worried about outshooting my hopper now.

[pito189]

When the warp modules come out are you getting one? It would look very sweet. The hose would be a lot shorter too. How long is that barrel? Very nice gun.

[RSUAVE911]

Yeah, I would not be worried about outshooting my hopper because I know the reg EMAG maxes out at like 16, I think the same for the SFL, So even if you set it at 16 you'll have no problem because the warp feeds at 20 and he halo I think 18. So your definitely good.

[Load SM5]

Pito-Definately waiting for the warp modules. I would even take a prototype un-annoed extreem one just to get the hose off of the top of the gun. The barrel is 14". Shoots all-stars like darts

[RSUAVE911]

Could you have the module sent to you from Europe because I think they are on sale on from AGD EUROPE.

[Load SM5]

I thought about that but they are'nt too cheap and When they come out for the SFL I'd rather have one that matches.

[Major Ho]

How come you dont have the warp breech instead of the vert. breach? Just wondering...

[Load SM5]

Warp breeches have'nt been released yet. At least not for SFL's and not on this side of the ocean. I'd love one though.

[paintballer187]

what are these warp modules you guys are talking about?

[Load SM5]

The feed section lifts out and can be replaced in the extreem/SFL e-mags. The warp module lets you feed the gun from the side.

[shartley]

Load SM5
Very nice set-up.

So... when did you say you were going to bring it up this way for a NH test run? ;)

[2000Sabre]

Load SM5,

That's once nice looking rig. Congratulations. I'm sure your kicking *** and taking names with that setup.

My Halo from AGD should be here today or tomorrow and I'll have a similar setup on my SFL. One question, what did you do to plug the the breach hole where the ACE was originally going to go? The plug that comes with the SFL is worthless and just blows out after a few shots. You mentioned the idea of another ball detent in another post earlier. I was looking at doing that but you would have to grind down or cut away a piece of the vert feed tube which extends into the breach. Would appreciate it if you could enlighten me as to how you solve the problem on your's. Thanks. LOL

Shartley
I live in the metrowest area of Mass. A short drive to NH. You're more than welcome to take my SFL out for a test drive. Send me a PM and maybe we can hook up.

[Load SM5]

I have'nt kicked anyone's butt yet. Jon is going to send me the warp cable to hook my warp up to the mag board to get it spinning reliablly. Right now with the delrin bolt and lack of kick, it's not quite there.

As far as the hole in the breech, I e-mailed shocktech to see about getting a few replacements to locktite in. So far no response. My next plan is to go to WGP and get another silver detent. You'll actually never want a second detent in there so it would be for looks only. So if the feed tube pushes the ball in and makes it useless that would be ideal. I'll probably just drill the ball in the detent out.

Shartley-meet you halfway at least?

[shartley]

LOL

Thanks guys! Looks like I may have to check my schedule this summer.

I know I will have to drop on down for some client work in CT, so maybe work in a “drive-by”? ;)

Looks like I may need to see about planning a New England AO shootout…..

[AutoMaggot]

Shartley? Were you one of the dudes at P&L two weeks ago with an E-Mag?

[shartley]

AutoMaggot
No, sorry. I don’t get out on the field these days. Here is a good explanation (Riotz was courious) ….

http://www.automags.org/forums/showthread.php?s=&threadid=21573

The only thing different is that I now help sponsor 3 teams and not 2. :D

Keep your eyes open this summer however…. I may be popping in on fields in New England and doing some write-ups for RumbleMe.com.

http://www.automags.org/forums/attachment.php?s=&postid=193657

[2000Sabre]

Automaggot If you're talking about P&L in Taunton that was me. I was there on Sunday 1/13 and drove down in the snow storm to get some time in. I had the purple SFL and proudly showed if off and let some folks feel the trigger and how smooth it is.

[cphilip]

So lets see...New SFL...WDP Girls...free beer...Burbon Street....AND A HALO?

You are realy startin to piss me off load....:mad:

[Load SM5]

So pissed, you can't even spell "Bourbon".

So, want to join us next year? You bring the house on wheels; we'll bring the youth and enthusiasm. ;)

[cphilip]

Boy do I miss spell check... :rolleyes:


I am certainly going to try.

[Load SM5]

What happened to spellcheck, anyway?

[2000Sabre]

Spellcheck got dropped because the service that handled it couldn't afford to offer it as free service anymore due to declines in the advertising revenue. Since it was no longer going to be free they dropped the feature.

[BTAutoMag]

that is a SWEET setup. i just creamed my pants... or is that the drool?