sffudapparel
04-27-2009, 11:50 PM
Hey guys.
I wanted to take you all on a nice little adventure this evening. I purchased my first automag in the fall of 2007 from a guy who owned a paintball store/reball center. Here's a picture of the automag when I bought it (actually bought both, but the RT pro is the one in this story)
http://i85.photobucket.com/albums/k65/tyjelly/P1010016.jpg
By the summer of 2008, picked up an IT body, a black RT pro foregrip piece and pneu'd the intelli frame and added a black CP barrel since the demon barrel didn't match
http://i85.photobucket.com/albums/k65/tyjelly/phone038-1.jpg
During the fall of 2008, my buddy went to basic and I decided to build him a mag. So i took some of the parts from mine and built him one. I needed some parts to replace so I picked up a new foregrip first. I also sold the intelli frame and as I always wanted one of the airwalk frames, found one of those. Somewhere along the line, I also found a 14" version of the Demon barrel that came with the gun originally. Lastly, I picked up one of the only 2 shockwave rails ever created.
http://i85.photobucket.com/albums/k65/tyjelly/2-22-09001.jpg
I hated the raw parts, and I wanted to go with a red/black color scheme to pull everything together (plus, as a University of Cincinnati student, it's school colors) But there's a good amount of red/black colored guns out there, so I decided to switch it up. After talking with Gruntbull for about a month, I was offered to spend lots of money in exchange for my desired anno work. I splurged, and it came out magnificent.
http://i85.photobucket.com/albums/k65/tyjelly/_DSC4863-01.jpg
http://i85.photobucket.com/albums/k65/tyjelly/mag4.jpg
Green/Yellow acid wash. I know the barrel looks lighter than the rest, but that's because it's sooo shiney. The whole gun is polished to the T. I wish I was able to grab a better picture to do it complete justice. (I spent almost an hour trying to get it right for these ones) Here's a run down of my project over the past nearly 2 years.
IT body
Shockwave rail
15* asa
cp gas thru
airwalk v2
cp asa
x valve (lvl10 / ULT)
Clamping feedneck
14" .69 demon barrel
Weight 2lbs 12oz
That's all. Wanted to give a little props thread to my mag.
Thanks for sharing the journey with me AO. Every part on the mag was bought / traded on here except for the x valve that is the original from the gun when I purchased.
I wanted to take you all on a nice little adventure this evening. I purchased my first automag in the fall of 2007 from a guy who owned a paintball store/reball center. Here's a picture of the automag when I bought it (actually bought both, but the RT pro is the one in this story)
http://i85.photobucket.com/albums/k65/tyjelly/P1010016.jpg
By the summer of 2008, picked up an IT body, a black RT pro foregrip piece and pneu'd the intelli frame and added a black CP barrel since the demon barrel didn't match
http://i85.photobucket.com/albums/k65/tyjelly/phone038-1.jpg
During the fall of 2008, my buddy went to basic and I decided to build him a mag. So i took some of the parts from mine and built him one. I needed some parts to replace so I picked up a new foregrip first. I also sold the intelli frame and as I always wanted one of the airwalk frames, found one of those. Somewhere along the line, I also found a 14" version of the Demon barrel that came with the gun originally. Lastly, I picked up one of the only 2 shockwave rails ever created.
http://i85.photobucket.com/albums/k65/tyjelly/2-22-09001.jpg
I hated the raw parts, and I wanted to go with a red/black color scheme to pull everything together (plus, as a University of Cincinnati student, it's school colors) But there's a good amount of red/black colored guns out there, so I decided to switch it up. After talking with Gruntbull for about a month, I was offered to spend lots of money in exchange for my desired anno work. I splurged, and it came out magnificent.
http://i85.photobucket.com/albums/k65/tyjelly/_DSC4863-01.jpg
http://i85.photobucket.com/albums/k65/tyjelly/mag4.jpg
Green/Yellow acid wash. I know the barrel looks lighter than the rest, but that's because it's sooo shiney. The whole gun is polished to the T. I wish I was able to grab a better picture to do it complete justice. (I spent almost an hour trying to get it right for these ones) Here's a run down of my project over the past nearly 2 years.
IT body
Shockwave rail
15* asa
cp gas thru
airwalk v2
cp asa
x valve (lvl10 / ULT)
Clamping feedneck
14" .69 demon barrel
Weight 2lbs 12oz
That's all. Wanted to give a little props thread to my mag.
Thanks for sharing the journey with me AO. Every part on the mag was bought / traded on here except for the x valve that is the original from the gun when I purchased.