Orings

[m0l0t0v]

I just bought an Xvalve O-ring kit from AGD's store, but I'm missing some o/rings that need to be replaced like the velocity adj oring, the reg nut oring and the lvl 10 pwr tube oring cap.

Anyone have ANY idea on how could I get these orings? Or if they are the same orings are another but the store has them in different names?

http://img131.imageshack.us/img131/5427/xvalveexplodedff7.gif

thanks!!

[secretweaponevan]

I just bought an Xvalve O-ring kit from AGD's store, but I'm missing some o/rings that need to be replaced like the velocity adj oring, the reg nut oring and the lvl 10 pwr tube oring cap.

Anyone have ANY idea on how could I get these orings? Or if they are the same orings are another but the store has them in different names?

http://img131.imageshack.us/img131/5427/xvalveexplodedff7.gif

thanks!!

I'd call AGD. Those are o-rings that almost never need replacing. They have them, but probably don't advertise them.

[m0l0t0v]

Well, I have around 6 years with my RT, they look old and yellow....

[secretweaponevan]

Well, I have around 6 years with my RT, they look old and yellow....

As with all things mag, if it isn't leaking, don't replace it. ;)

[Ando]

As with all things mag, if it isn't leaking, don't replace it. ;)

QFT :dance:

[athomas]

Those orings don't hold air and are only in place to keep the attached parts from turning out due to vibration during use. They should be fine for the duration of the life of the gun. If you do need new ones. There should be the proper sizes in the kit. They just aren't listed as such. They are the same size as other orings that are used in the valve. Without knowing off the top of my head what orings are their equivalent, compare them to ones in the kit until you find the correct ones by visual inspection.

[Konigballer]

I believe the older 'RT' parts kits had some of those o-rings for the reg portion.

[MANN]

ive got some if you need them. just pm me.