How do I install the C-Clip and Washer?

[mpsd]

I recently had two bodys re-anoed and they came back with the C-Clip and Washer pulled out. Now, I know that this can be just a matter of "insert them down the tube from behind, one atop the other, in this order" but can anyone please clarify me on how should I do it? Any specific tools needed/recommended?

Thanks,

Mendel.

[DevilMan]

I'm sure someone else knows better than I, but I'm pretty sure it's just that.

Put the washer in from the back with it seating flush and solid against the back of the AL "land" that's just behind the feed port. Then slide the C clip down behind the washer and poke it around with a wood or other non-scratching tool til it snaps into the groove behind the washer.

That's what I think would work anyway.... :D

DM

[maniacmechanic]

I'm sure someone else knows better than I, but I'm pretty sure it's just that.

Put the washer in from the back with it seating flush and solid against the back of the AL "land" that's just behind the feed port. Then slide the C clip down behind the washer and poke it around with a wood or other non-scratching tool til it snaps into the groove behind the washer.

That's what I think would work anyway.... :D

DM

Thats how it works , the clip may tend to try not to go in the groove using 1 tool , a pair of chopsticks (plastic) 1 about 4 " longer than the other work great

[pbjunky99]

i would have never thought a pair of chopsticks would be a tool for paintball markers lol

[Looper]

http://www.deadlywind.com/tech/ring_clip/index.html

[mpsd]

http://www.deadlywind.com/tech/ring_clip/index.html

Thank you!!! That´s just perfect!!!

And thanks to the other guys who have helped. That's why I just LOVE AO!!!

:cheers: