PDA

View Full Version : the it body


greensplash
09-19-2009, 09:09 PM
i tried to search but didnt find much of anything but b.s.t threads so if anyone has any info on them it would be nice.
Rudz
09-19-2009, 09:27 PM
Made by intimidation technoligies

Am/mm length body

BE SURe IT HAS CLIP AND WASHER

They didn't come stock with them

Angel feednecks

Cocker detents

Cocker barrels
greensplash
09-19-2009, 09:33 PM
clip and washer?
Ando
09-19-2009, 09:48 PM
http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.prodInfo&productID=372&categoryID=16 <---clip
http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.prodInfo&productID=373&categoryID=16 <---washer
;)
greensplash
09-19-2009, 09:58 PM
o thanks
Rudz
09-19-2009, 10:08 PM
Look thru the body from the back, you can see if it has the washer or not

It prevents bolt wear on the body
Ando
09-19-2009, 10:12 PM
With out them those IT bodies will be junk in a good 2 or 3 cases of paint.

Edit: So i've been told :rolleyes:
greensplash
09-19-2009, 10:19 PM
ok ill make sure i have them in there before i shoot it
koleah
09-20-2009, 05:01 AM
Made by intimidation technoligies

Am/mm length body

BE SURe IT HAS CLIP AND WASHER

They didn't come stock with them

Angel feednecks

Cocker detents

Cocker barrels

Thats a good list there Rudz. Seems pretty complete. I will add:

Some had the front grip frame screw hole drilled all the way into the breech, others did not. Quality control at Intimidation Technologies apparently was not the greatest.
A-Tach-One
09-20-2009, 08:44 AM
Actually Xtreme Depot made the I.T. (Intimidation Technology) Body.
greensplash
09-20-2009, 10:01 AM
ok thanks thats good to know abt the screw

any idea on how many were made?
Ando
09-20-2009, 10:04 AM
I have one :rolleyes:
Rudz
09-20-2009, 11:59 AM
So do I, lol
Ando
09-20-2009, 12:37 PM
Someone said a bunch got distroyed because they didn't have the washer and clip so who knows what's out there.
greensplash
09-20-2009, 09:59 PM
so with out the washer and clip the bolt spring or bolt face beat the body to death?
Tym
09-26-2009, 07:06 PM
so with out the washer and clip the bolt spring or bolt face beat the body to death?

Yup, all custom milled bodies are like that. I've got a ripper and a phoenix, they both have one. The washer is steel, as apposed to the aluminum the body is milled from. As we all know, aluminum is like wood, it doesn't take much to nick/gouge/wear the stuff. So a washer takes the abuse, and spreads the force over a greater area so the aluminum can handle it..
Sumthinwicked
09-26-2009, 07:20 PM
theyre good bodies i have had 3 the first was a mech mad i loved it but had to sell for bill reasons the 2nd was hyprerframed and the last one i bought i forgot it was am/mm length so i didnt end up using it for my emag LOL after all the effort of tracking one down i had to get rid of it LOL
greensplash
09-26-2009, 09:40 PM
i got mine today and i really like the looks of it, needs an anno tho. how do i get the clip thing out?
greensplash
11-24-2009, 09:06 AM
well it got anodized how to i get the clip and washer back in place? :confused:
Ando
11-24-2009, 10:47 AM
The washer will go in just by dropping it inside the body. The clip on the other hand is a little harder. I have a brass drift that fits perfectly inside the body. I just pushed the clip in till it clicked into the groves. You can use anything from wood to a plastic rod, I've also seen someone use a lvl 7 bolt to get one in. Not the easiest thing to do but it worked after a few tries. :rolleyes:
greensplash
11-24-2009, 11:23 AM
got it in with a screw driver through the sear slot

will have to post pics of my build soon
Smoothice
11-24-2009, 02:48 PM
I had one at one time. Really liked it. Post up them pics!
SSP REAPER
11-24-2009, 02:53 PM
we want pictures!
greensplash
11-24-2009, 03:04 PM
in paintball talk
Ando
11-24-2009, 03:25 PM
http://automags.org/forums/showthread.php?t=247131