Emag not registering trigger pulls

[Epic_Scotsman]

SO its my top button can anybody help me remedy this see last post for details



Ok so I took her out today for a game

started off wicked then developed what I determined to be a carrier leak
which was ok we were only playing hopper ballI fixed it when I got home.

but then it developed a tendendcy not to pick up trigger pulls in electro mode?

No what could cause this? its not constant but it definitly doesn't fire about half the time.

it made electro mode unuseable

hybrid unpredictable

and well mechs mech that always works

Anyone know what this might be

Also I luv hybrid mode (when it worked)

[Smoothice]

I don't know squat about emags. But I would say maybe your hall sensor is to close. Try adjusting it and see what happens.

Or wait for someone who knows what they are talking about. ;)

[fishmishin]

I had a problem yesterday with the set screw in my trigger vibrating in and causing my e-mag not to shoot. Since I was at the field playing and didn't have time to wait for loctite to dry I pulled it out took a wrap or two of thread sealant tape and reinstalled it. It could be a problem with your HES, but I would try adjusting the set screw on your trigger that controls the magnet to see if you could be having the same problem I had.

[fishmishin]

I just looked at a stock e-mag trigger and noticed it didn't have the set screw to adjust the trigger, so if that is the trigger you have forget what I posted. I am using a Tunablade and it has the set screw.

[Epic_Scotsman]

so I adjust the magnet and it will be good for about ten shots then stop working again this is sooo strange

I am thinking hes is a good bet

[Ando]

so I adjust the magnet and it will be good for about ten shots then stop working again this is sooo strange

I am thinking hes is a good bet
You have to sweet spot the trigger. Keep working with it.

[Epic_Scotsman]

argh now it will barely shoot in e mode at all like one in 20 if that and it seems random

[maniacmechanic]

how the battery charge ??

[Epic_Scotsman]

fully charged

[Epic_Scotsman]

Figured it out good news nt the hes bad news

My top button is screwed the metal"cover" is popping off

if I hold it down its fine but when it pops off the board shuts down

I'm not going to need a new board am I :( ?

Somebody help :cry: