View Full Version : RT on/off Problem
leloup
10-22-2009, 10:57 AM
I have an RT on/off and it leaks air, though with the trigger depressed, does not. That means the on/off has bad o-rings, right? Any one know where to get new o-rings for an rt on/off?
Start at the 8 min mark on video 6 and it contuses on part 7. Make sure what your problem is before you go buy anything.
Part 6...
http://www.youtube.com/watch?v=VQnGpQYuvlw&feature=related
Part 7
http://www.youtube.com/watch?v=huoHWAt_2CI
leloup
10-22-2009, 01:14 PM
With the stock on/off, there is no problem, but with the rt in there, it leaks unless I hold down the trigger.
EDIT: leaks out the trigger area, not the barrel.
Could be the Oring inside the on/off
http://i34.tinypic.com/2e0uryu.jpg
leloup
10-22-2009, 02:19 PM
That is what I was thinking, Ando. Do you know of a place to get a new one? Does anyone have a spare that they will sell for super cheap?
Does anyone know of any retailers that sell on/offs?
Have you tried lubing it first? I have a 2 spares. I can send you one. PM me your address and I'll have it in the mail tomorrow.
Graties ;)
Tunaman
10-22-2009, 04:41 PM
If it doesn't leak when you hold the trigger back when gassed up there is nothing wrong with your on/off. ;)
If it doesn't leak when you hold the trigger back when gassed up there is nothing wrong with your on/off. ;)
what about the bottom oring of the on off?
secretweaponevan
10-22-2009, 08:32 PM
what about the bottom oring of the on off?
It will be an o-ring past the on/off top, so yes, this sounds right.
With the stock on/off, there is no problem, but with the rt in there, it leaks unless I hold down the trigger.
EDIT: leaks out the trigger area, not the barrel.
He's already isolated the problem to the RT on/off. It has to be one of the 2 orings.
Hmm...You are using a RT on/off pin right Leloup?
He's already isolated the problem to the RT/on off. It has to be one of the 2 orings.
Hmm...You are using a RT on/off pin right Leloup?
so then the bottom oring like i thought!
ROFL...I'm thinking its one of the 2 orings on the RT on/off since the stock on/off isn't having any issues and the same 2 bottom orings are being used. My only question...is he using a RT on/off pin and not the stock pin...
Edit: NM...I'm a douche.
He would have to be using the RT on/off pin since the stock one wouldn't fit in the RT housing :tard:
...and still waiting on his address :rolleyes:
And pump I think your getting the ULT mixed up with the normal RT on/off. There's no oring (besides the 2 loose ones) at the bottom of a stock RT on/off
no im not, the RT has 2 dynamic orings, one on top one on bottom
if you let go trigger leaking out the bottom, has to be either 1 of the two bottom orings
lol..ok we're talking about the same oring then just looking at it 2 different ways.
leloup
10-23-2009, 05:17 PM
Sorry, had parent teacher conf. last night so I was busy all night. Pm'd my address. And yes, I am using the pin that came with the RT on/off.
Got it. It's in the mailbox for pickup tomorrow. ;)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.