How to operate xmod 1.8 on my emag

[CatoRockwell]

I received my first emag lowers today with the xmod 1.8 software installed. I'm having some trouble figuring out how to use it.

1. I can't get the mode to change from semi and as I cycle through the menu options it doesn't allow me to cycle through many of the listed options on the emag users manual.

I could use a good resource for learning to operate this.

[Ando]

All you need to know about X-Mod
http://www.niedtech.com/index.php

[maniacmechanic]

top button first , bottom button to scroll

[CatoRockwell]

It onlyets me scroll thr ace and display it won't. Let me scroll on semi mode or on rof It doesn't give me any other menu options

[Rudz]

Open the grips, pull the jumper with the brown wire attached to it, its the tourney lock, then you can change the modes, be gentle when pulling the jumper out

[splat15k]

Sounds like you have the "tournament lock" wire loop engaged. If you take your grips off and look at the bottom wire header and see a loop of wire there, pull that connector and then try your functions.

[Rudz]

Sounds like you have the "tournament lock" wire loop engaged. If you take your grips off and look at the bottom wire header and see a loop of wire there, pull that connector and then try your functions.

I beat you to it, nananananananan!!! Lol

[splat15k]

I beat you to it, nananananananan!!! Lol


Whoa! You certainly did! I did not even notice that...and here I was thinking that I helped out, but nooooooo

[CatoRockwell]

Got it removed and now it's letting me select my options thanks! :clap: