PDA

View Full Version : pneumag "how to" thread


MANN
12-01-2009, 10:27 PM
I know that there were many of these. I also know that many were deleted. what is or is not allowed to be posted on AO? With pneumag ready frames being released I would think that it would be nice to have such a thread.

Just wondering.. Hoping a mod will enlighten me.
zondo
12-01-2009, 10:31 PM
Here's Mag79's on sleeper mod'ing a CP ASA:

http://www.automags.org/forums/showthread.php?t=232154
Ando
12-01-2009, 10:46 PM
For the reals...I would really like to know where to buy this bit. I've search all over the place but found a substitute that did work but depending how you tweak the tank it sometimes hisses out for a mili-sec or 2. Nothing big, I would just like to get it done properly.
http://i63.photobucket.com/albums/h159/sandro79/tools/cp5a.jpg
Shirow
12-01-2009, 10:48 PM
For the reals...I would really like to know where to buy this bit. I've search all over the place but found a substitute that did work but depending how you tweak the tank it sometimes hisses out for a mili-sec or 2. Nothing big, I would just like to get it done properly.
http://i63.photobucket.com/albums/h159/sandro79/tools/cp5a.jpg

I know this isn't exactly answering your question but for the price Loguz(x10) charges to mod the ASA, it hardly seemed worth it to me to even go looking for bits.
Ando
12-01-2009, 10:52 PM
I know this isn't exactly answering your question but for the price Loguz(x10) charges to mod the ASA, it hardly seemed worth it to me to even go looking for bits.
You do know those bits cost a ton of money right? I'm talking like over $100-$200 depending what it's use is for.
zondo
12-01-2009, 10:53 PM
EDIT: Sorry for diverting slightly off topic...

I hope there are going to be more people using the pneu to open up the designs of guns. Check this out:

http://www.automags.org/forums/showthread.php?t=178205



and there was this too that Rainman built (Don't know if it was pneu'd or not, but moving the grip frame around is doable with pneumatics):
http://i411.photobucket.com/albums/pp198/robzondo/p90mag8.jpg
MANN
12-01-2009, 11:09 PM
yeah, but some of the items that are used on pneumags that most sell for 1-2.00 can be purchased for .05. you can purchase everything for a pneumag for alot less than what most think. It is the same with orings. Some people sell them for 1-2.00ea. If you know where to get them you can purchase them for .06 ea. or less
Beemer
12-01-2009, 11:16 PM
I know that there were many of these. I also know that many were deleted. what is or is not allowed to be posted on AO? With pneumag ready frames being released I would think that it would be nice to have such a thread.

Just wondering.. Hoping a mod will enlighten me.

So you Know? Most times threads are deleted by the Member. Maybe you know why this happens.

You know the rules. Post what ever you like with in them. No porn, swearing etc, etc.

Here is a start for you.

http://home.comcast.net/~beemer2/PneumaggerHowTo.wmv 18.5megs = 55min
Ratt
12-01-2009, 11:47 PM
For the reals...I would really like to know where to buy this bit. I've search all over the place but found a substitute that did work but depending how you tweak the tank it sometimes hisses out for a mili-sec or 2. Nothing big, I would just like to get it done properly.
http://i63.photobucket.com/albums/h159/sandro79/tools/cp5a.jpg


Go to www.mscdirect.com In the search box, type the dimensions of the end mill that you need, and add 'end mill' at the end. This place should have them...they have everything.
Ando
12-01-2009, 11:52 PM
ROFL...I'm already there looking up some other stuff as we speak :p
Ratt
12-02-2009, 12:20 AM
AWESOME...while you're there, pick me up a Vectrax CNC knee milling machine: http://www1.mscdirect.com/CGI/NNSRIT?PMPXNO=17726295&PMT4NO=75422910 :p
MANN
12-02-2009, 12:55 PM
So you Know? Most times threads are deleted by the Member. Maybe you know why this happens.


I have no idea why they are gone. They were her, and now gone. That is why I was asking the question if they were "against the rules"
xero28
12-02-2009, 01:07 PM
There is a good How-To link in Cyberave's pneumag parts dealer thread. It's over on BEO.

http://www.bigevilonline.com/showthread.php?t=7

I guess if you are on that site too much though they shut you out from viewing more threads until you register. It's a good place to be registered though, so shouldn't be worried about that.

But yes, I agree that there should be a good How-To here on AO since most of the people doing the mod should be looking here first for information.

EDIT: Crap, I just looked at the second page over on BEO and all of the photos that go along with the How-To are out because the account has been inactive for over 90 days. :(
Smoothice
12-02-2009, 01:36 PM
EDIT: Crap, I just looked at the second page over on BEO and all of the photos that go along with the How-To are out because the account has been inactive for over 90 days. :(

All pictures are working fine for me. :confused:
xero28
12-02-2009, 01:39 PM
All pictures are working fine for me. :confused:

The pics on the first page of all the examples work, as well as the ones on the second page showing how to drill an ASA for a sleeper. But if you continue down on the second page where the step by step is, the pictures do not work.
Smoothice
12-02-2009, 02:06 PM
The pics on the first page of all the examples work, as well as the ones on the second page showing how to drill an ASA for a sleeper. But if you continue down on the second page where the step by step is, the pictures do not work.

I just scrolled to the very bottom of page 2 and they all work...

hmmm
Shirow
12-02-2009, 02:07 PM
You do know those bits cost a ton of money right? I'm talking like over $100-$200 depending what it's use is for.

That's what I mean. Loguz charges $25 to mod the ASA. So, to me, it wasn't even worth looking for parts to do it myself.
xero28
12-02-2009, 02:27 PM
I just scrolled to the very bottom of page 2 and they all work...

hmmm

Very weird. I just took this screenshot from that page.

http://img11.imageshack.us/img11/8024/picture1qv.png

Though if I right click and open the picture in another window it works fine. Guess it's just one of those things. Sorry Mann for cluttering up this thread. :rolleyes:
RogueFactor
12-02-2009, 02:41 PM
You can find it here also: http://www.pblegion.com/showthread.php?t=818 :rofl:
Temo Vryce
12-02-2009, 04:14 PM
A lot of the how-to threads and posts were pulled because someone here (don't remember who) received a letter from SmartsParts (I think) asking them remove them, for face legal consequences. That individual passed this recommendation to others here.

At least that how I remember it happening.
xero28
12-02-2009, 04:30 PM
A lot of the how-to threads and posts were pulled because someone here (don't remember who) received a letter from SmartsParts (I think) asking them remove them, for face legal consequences. That individual passed this recommendation to others here.

At least that how I remember it happening.


Actually, I think it was in fact Pro Team Products who hold the patent for a pneumatic actuated trigger system and who delivered the C&D. Though I may be mistaken in that.
Smoothice
12-02-2009, 05:03 PM
It was actually shingo who was told to pull the info from his company server. It was sent from a lawyer that never stated who his client was.

As a family man he correctly complied with the letter.

There are many of us who saved all of his info for future reference...
Temo Vryce
12-03-2009, 10:47 AM
It was actually shingo who was told to pull the info from his company server. It was sent from a lawyer that never stated who his client was.

As a family man he correctly complied with the letter.

There are many of us who saved all of his info for future reference...


I knew someone here would remember better than I what had happened.