Minimag Doesn't Like Boa barrel

[Aslan]

I don't know if anyone else ever had this happen, but my Minimag won't fire with my stainless steel Boa barrel. I have to put pressure on the bottom of the barrel to get the minimag to cycle. I take that barrel off and put on the stock barrel or one of my other barrels...she fires just fine. :confused:

It's weird.

[Ando]

You have a lvl 10 installed?

[athomas]

Perhaps the barrel id is too tight for the bolt. If the barrel is not perfectly centered and the bolt just fits, then it will rub and not fire.

[Aslan]

Level 10 installed (doesn't everyone have a Level 10 nowadays?) :cheers:

The weird thing is, my automag (level 10) with Classic valve fires just fine with the Boa barrel, but the Minimag doesn't.

Oh well. Glad I got a whole bunch of extra barrels!! :shooting:

[athomas]

It could be that the twist lock device is tight on the minimag, causing the barrel to be offset just a bit. Not all barrels would be affected as much. It would depend on the clearance. Each barrel is machined with slightly different tolerances.

Try putting a wrap of tape under the barrel orings to see if it helps center the barrel a bit.