Video of Mini Pneumag

[sslecyk03]

I am right around 500psi on my tank during this video so it isn't exactly the best representation of the marker but it does the trick...still rippin' pretty fast on it.

http://www.youtube.com/watch?v=OpYgxl-31uc

[chafnerjr]

Good stuff man! You have to love a pneumag :shooting: Got pic's of the internals?

[sslecyk03]

Good stuff man! You have to love a pneumag :shooting: Got pic's of the internals?

I do indeed,

http://img708.imageshack.us/img708/448/maginternals.jpg (http://img708.imageshack.us/i/maginternals.jpg/)

All the mods to the frame were relatively easy with a dremel. The hardest part was getting the mpa-3 to fit in the right spot.

[zondo]

Cool!

I'll be interested to see how this does over a chrono for strings of different lengths. I saw that valve cap mod a while back on MCB and just wondered how another reg would keep up the recharge rate.

[chafnerjr]

All the mods to the frame were relatively easy with a dremel. The hardest part was getting the mpa-3 to fit in the right spot.

Had to add a bracket for the 3way right. Looks like a very small one. Why so low on the trigger rod? Look's great... can't wait to see video of it firing once you get the valve back in. I haven't read too much about the valve/reg mod here yet. What's the diff? Shortened reg? Lower volume? Higher volume?

[sslecyk03]

Had to add a bracket for the 3way right. Looks like a very small one. Why so low on the trigger rod? Look's great... can't wait to see video of it firing once you get the valve back in. I haven't read too much about the valve/reg mod here yet. What's the diff? Shortened reg? Lower volume? Higher volume?

not sure about the specifics with volume but cosmetically it takes about an inch off the back. The cap will extend less than a quarter inch past the rail In back so it will be pretty tiny. Hopefully I get the cap soon so I can test the recharge rate!