View Full Version : your thought on the hyperframe
hillg
04-16-2010, 10:50 PM
I have a new hyperframe and I want to get your response to the frame and how good or bad it is. I plan on running an Xvalve with ULT. Is there anything else I should know?
flyingpootang
04-16-2010, 11:52 PM
Make sure the sear isn't touching the noid when aired up. The 4 screws on top of the frame are for holding/adjusting the noid. A UTB board would be perfect fit. Contact Jai (p8ntbal4me) and I'm sure he'll hook ya up....
http://automags.org/forums/member.php?u=13779
skyless
04-17-2010, 01:14 AM
I have a new hyperframe and I want to get your response to the frame and how good or bad it is. I plan on running an Xvalve with ULT. Is there anything else I should know?
I have a 13bps hyperframe w/xvalve+ult and thought it was ok at first. I upgraded to a lighter microswitch and wow it's much nicer it's not hard to hit max bps. I'm also considering putting in a UTB, sounds like the way to make it really rip. I got mine used a few years ago and have never had any issues with it.
Coralis
04-17-2010, 10:53 AM
Personally I love mine, I wouldn't ever go back. I keep mine set for 8 or 9 bps and its plenty fast for me.
hillg
04-21-2010, 10:52 PM
so as a direct bolt on it sounds like it should be fine. Still have not used it yet but look forward to seeing how it does.
p8ntbal4me
04-30-2010, 04:16 PM
One thing I have done with mine is replaced the solenoid and upgrade to a UTB.
The second thing I did was replaced the 80g switch with a 30g switch for a much more "walkable" trigger.
~ P8nt
http://home.comcast.net/~allfor114all/AoUSMC.gif
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.