PDA

View Full Version : Will a 800 PSI output tank cause an RT effect with a X valve with RT on/off?


garbageman705
05-30-2010, 05:42 PM
If I avoid the ULT and use a preset HP tank will I be able to get an RT effect?

Thanks.
athomas
05-30-2010, 05:53 PM
You will always get the RT effect. That is what the retro valve does. The question is how much reactivity will you get? If you use the short level 10 bolt spring and the most efficient barrel for your setup, you will get a reactive gun. Will it go full auto, probably not. The retro valve is not designed for that. That is why people use high input pressures and shorter on-off pins. They enhance the reactivity by operating outside the normal range of the valve.
garbageman705
05-30-2010, 06:02 PM
So if I want to have the gun go full auto what do I need to do. I'd like a gun that goes full auto if I want but is easily able to keep shooting semi.
athomas
05-30-2010, 06:12 PM
The easiest method is to shim the on-off assembly. That effectively shortens the on-off pin. Try it and see how it feels in your setup. If you don't get enough reactivity, you will probably have to increase the bottle regulator pressure to about 1000psi.
garbageman705
05-30-2010, 06:22 PM
If I use shims does that mean I am using a ULT on/off or can I shim a RT on/off. I heard that ULT will decrease reactivity.
longi
05-31-2010, 02:42 AM
Just buy an emag on/off pin, you'll get more reactivity than you ever could hope for. The RT on/offf fine but you don't get nearly the same amount of reactivity from it. Shimmng the ULT is also fine but you'll really need an adjustable reg to get the best results from it.
athomas
05-31-2010, 05:21 AM
If I use shims does that mean I am using a ULT on/off or can I shim a RT on/off. I heard that ULT will decrease reactivity.You can shim a RT on/off as well. The RT on-off is the one I was referring to.
2BAD4U
05-31-2010, 07:38 AM
:shooting: http://www.youtube.com/watch?v=so7dMhj-8jY&feature=related
garbageman705
05-31-2010, 10:37 AM
Is that with an RT on/off?
2BAD4U
06-11-2010, 01:42 AM
Just buy an emag on/off pin, you'll get more reactivity than you ever could hope for. The RT on/offf fine but you don't get nearly the same amount of reactivity from it. Shimmng the ULT is also fine but you'll really need an adjustable reg to get the best results from it.
"sweet baby jesus" , you weren't kidding !!! 1 E-Mag on/off pin + 1 quad 0-ring combined with the X-valve = RT time ... :shooting: