ShoeBox Compressor Important Information, 30 Day Money back YES --- Warranty NO

[AGD]

*********** NOTICE ****************
We are no longer using this forum for the "On Order List". You can now get on the order list by visiting www.shoeboxcompressor.com and going to the order tab. No sign ups required and you will see where you are on the list.

We strongly advise you sign up for the ShoeBox Forum which is also accessible by a tab on the website. All announcements will be through the forum. Sign up is now instant with the new forum software.

The website is still under construction so please pardon our dust!

Tom Kaye





ShoeBox Compressor Important Information, 30 Day Money back YES---
Warrantee NO


This is an important explanation of the warrantee situation on the
compressor. As may of you know from the past, I fixed Automags for
free for many many years after they were sold. In order to give you
the least expensive price on this compressor, I can not give this
type of warrantee again.

As an example, if the compressor was priced the same way I priced
the Automag (based on a multiple of the actual parts cost), it would
be 1,200 dollars. You made it very clear to me on the forms that if
it was priced at 500 dollars or more, you were not interested. So I did
my job and brought it in under 400 dollars and still reduced the
fill times by 5x from the original estimates.

The other problem with a compressor vs a marker is the amount of run
time. You can't possibly shoot a marker 24/7 but some of you will
turn on this compressor and let it run non-stop until it breaks.
Many of you will try to over pressure the system to shorten your run
times and there is no way I can control that. The sharp guys will
fiddle with the gearing to tune it to the max and in the process
melt something down. I can't be responsible for these things.

Again in order to keep the price down, I will not have a phone line
for tech support. I will be answering tech questions on the new
compressor forum here. I am also working on getting Tuna and others
to do tech support. I am using the Autococker model in this case.
Budd didn't do much tech support but the dealers loved him because
everyone came in to the shops for support. As you see with the hose,
there will be lots of ups and extras that you can get for the
ShoeBox from your dealer.

I don't want anyone to feel like they got ripped off from owning one
of my products, so I will offer a 30 day MONEY BACK NO QUESTIONS
ASKED policy. You have to pay for the return shipping. I will refund
the original price of the compressor (but not the original shipping
to you). If you buy it from a dealer, you have to get your money
back from the dealer and then I will refund the dealer directly. If
you didn't give me the money originally, don't expect me to fix a
problem you have with a dealer.

If you get one of these units, plug it in, and a part breaks in half
due to a manufacturing defect, I will repair or replace the unit at
our discretion. If you give me grief, I reserve the right to give
you your money back.

So that is the bad news, but here is the good stuff. Most of the
small parts even up to and including the pistons, can be purchased
reasonably online at McMaster Carr. This includes the chains,
sprockets, bushings, bearings, pressure fittings, pressure tube,
axles, clips, bolts and some of the orings. You can literally
rebuild every wear part in the unit from McMaster. I will also have
an online store with replacement parts soon.

How long will it last? Thats a question many of you are asking right
now. In fact we just don't know. I have tried to kill the prototype.
Beemer is trying to kill a production model right now. We hooked one
up at 650 rpm (the stock speed is 200) and it jumped across the
floor....for 15 minutes...(Beemer hid in the other room)...it
finally stopped pumping a few minutes later (but didn't stop jumping
around) so we shut it off. The excessive heat had melted the
delrin backcheck but NOT the high temp oring (got to love viton). We
have never worn out an oring or piston or cylinder in all the weeks
of testing. The only thing that stops it pumping is high heat from
compression melting something because you over reved it or a flake
of crap getting wedged in the backcheck valve.

So if you have actually read to the end of this long winded
diatribe, you are one of the guys I want to sell the first batch
too. This is actually the official order list. To be officially on
the list you need to reply in this thread with something like "The
money back thing is ok with me!!" AND YOUR ZIP CODE. When we get
units ready to ship, we will pm you with a shipping cost and a total
price. You will need to paypal the money into our account and it
will be on its way. Remember, you need to post that you read and
understand the limited warrantee and your zip code.

Thanks everyone! Looking forward to a successful roll out.

Tom Kaye

[ezcreation]

I have read and accepted the conditions on the sale of the shoebox.

My zipcode is: 48837

Thanks Tom

[GRAYGHOST]

I have read and agree to the conditions of your 30 day return policy My zip is 53218 THANK YOU

[mag79]

I have read and agree to the conditions.

My Zip 30253

[ArmyEngineer]

Read it cover to cover. I concur. 35802. Thanks Tom!

[DoubleDutch]

I have read the terms and conditions in this thread and I agree to them, and I would like to purchase one unit. My zip is 80126.

[joeyt]

"The money back thing is ok with me!!"

AND MY ZIP CODE: 01740

[Xmagterror]

I am OK with the terms of sale....count me in..... ZIP 49047

[fflamingmoe]

What about the guys in Canada TK?
Would you ship out to Ontario?
Postal Codes? :cheers:

[maniacmechanic]

I have read and agree to the conditions. "The money back thing is ok with me!!"
I would expect no more , I would rather pay you for repair parts than McMaster Carr
zip code 34953

[mpsd]

Tom, that seems to be a fair warranty agreement to me.

Now, the only question I have is regarding the replacement parts. You said most of them can be found at McMaster. Will you print a parts list with part numbers and send it along with the ShoeBox? This way we could keep it running forever, right?

Also, you've mentioned on another thread that the "ideal" ShoeBox would have some different parts like brass pistons, for example. Are these parts also available at McMaster?

Thanks,

Mendel.

TK EDIT: Yes I will provide part # for McMaster. They will be available on the website coming soon. I will fill you in on the various options as they come along. One in the works is a whisper quiet option.

[mustangii]

I have read and also agree with the terms of this thread.
my zip is 64093

edm

[PBChappy]

I agree to all posted by AGD and still want

29229 is my zip

[wimag]

The money back thing is okay with me.

53913

[my automag]

I read, understood, and agree with the 30 day return policy along with every thing else.
postal code: M1E-3S2
Hope I can get one shipped to Canada, getting on the list just in case it's all good.

[splat15k]

I have read in entirety and absolutely accept your terms and conditions and look forward to receiving the ShoeBox!

ZIP: 13760

[DevilMan]

A-OK WITH ME!!!! I even read the fine print!!!!

Thank you again for everything that you did to make this all happen man...

94063

DM

[BigEvil]

Screw it im in, I'll find the money somewhere.

Zip 10314

[Sneaky Sir]

I accept the conditions.

55350

Got a question though, is there a bulk pricing deal if we'd like to get both a 3000psi and a 4500psi model?

TK EDIT: No bulk pricing at the moment. Sorry.

SS Edit: Thank you sir.

[MANN]

"The money back thing is ok with me!!"

37920

[Majinebz]

"The money back thing is ok with me!!" 84095

[AGD]

Great response thanks! I will be cutting this off at about 80 orders to leave a few for backup.

AGD

[BigEvil]

Great response thanks! I will be cutting this off at about 80 orders to leave a few for backup.

AGD

When will you be needing payment ??

TK EDIT: You can pay when you get your gun back :)

[ezcreation]

Hey Tom
What is the rough time frame?
any chance to have it prior to mid July?

Thank you

[harleywrench001]

I have read and accepted the terms and conditions of the 30 limited warranty. Zip code is 42301. Thanks Tom.

[behemoth]

Warranty*

Just saying.

[AGD]

I expect these to ship in about two weeks unless something catastrophic happens.

AGD

[mustangii]

Check, cash, money order, Paypal?
just wondering?
thanks
edm

[fishmishin]

I have read the terms and fully agree to them.
Zip 23434

TK EDIT: that makes 20 to here.

[Guardian]

Read and agree .
Zip 46970

[CatoRockwell]

Read it. Need it. Money back works for me

ZIP: 84664

[Jongyver]

The 30 day money back is ok with me. zip code 21220

[Army]

What's a Shoebox?




:D

[paintball72]

I have read and fully agree to the terms

Zip is 68462

Having some cash flow issues, so if I can't get the money soon I'll delete this to make room for others :(

[greystone]

I live in Tucson, AZ. Today it was 108 degrees and it's still very early into the summer heat.

How do the ShoeBox's perform under high temperature environments? It get so very hot and dry here that plastics will melt if left in the sun for sometimes under an hour. I'm seriously interested in a ShoeBox, however the heat issues concern me. Should I have concerns about such a dusty/dry climate?

Thanks for any further information available.

[ProblemKinder]

Check, cash, money order, Paypal?
just wondering?
thanks
edm


You will need to paypal the money into our account and it
will be on its way.

:cheers:

[Karta-mag]

I have read and fully agree to the terms
ZIP 74105

[Josh2Xtremes]

I have read and fully agree to the above terms.

Zip: 22554

[nalby]

I have read and accepted the conditions on the sale of the shoebox

zip 10958

I've been an electrician for 22yrs and worked on and designed electo_pnumatic conveyer systems. I am really intrigued by your product and can't wait to try on out.

[Tunaman]

When will you be needing payment ??

TK EDIT: You can pay when you get your gun back :)
I dont like the sound of this! Looks like Scott will get a free compressor... :D

[Bigwooly1013]

When will you be needing payment ??

TK EDIT: You can pay when you get your gun back :)

I LOL'd at the office at this one. People looked at me funny. :rofl:

[Wizard12341]

I read and accept the terms

Zip 27215

[SSP REAPER]

I have also read AND accept the terms :D

My zip code is 03867

Thanks Tom! Glad you picked my name for the "shoebox" :p

[Mayvik]

I've read and accepted the terms as well! :D

ZIP is 80235

[kd4arf]

6-7-10
1302hrs

Hello Tom,

I have read and understand the limited warrantee.

My zip is 23322

Regards and thanks for making it available!


R. Steve Haynes

[Twiek]

Read and accepted the terms.

ZIP is 40509

[Brewtt]

The Brewtt abides. :cool:

95945

[ta2maki]

I'm not signing up for the initial run. I don't think I can abuse this enough in the near future to be able to give any feedback. Also wrong pressure for me.


Is there a hopeful date to when the 3000psi version will be made available for sale? I need a 'start it and forget it' solution to fill scuba tanks. I don't feel comfortable with putting a regulator on the output.

TK EDIT: 3k's in next run. Lots of people are asking so I cant ignore it.

[AGD]

JSN agrees to the terms 87544 TK has email.

[foxtrot90]

Read, agree, giddy as a school girl. :bounce:
37650

[PAINTHEY]

The money back thing is ok with me.
Home Zip 32466.

Already have a filter/reg for the input side waiting. :)

[Looper]

"The money back thing is ok with me!!"
ZIP CODE 04042

[Sneaky Sir]

So has there been any thought or decision as to what the actual shipping carrier will be? UPS, Fed-Ex, USPS...

Or did I read and miss it somewhere?

[AGD]

UPS unless there is a good reason to do otherwise.

AGD

[quickster47]

I have read the terms and agree to them.

Zip is 38574

Carl

[joeyt]

UPS unless there is a good reason to do otherwise.

AGD

in my experience fedex seems to take far more care with packages than ups. and I think fedex ground is just as cheap or cheaper. just my own anecdotal experience...

[Zone Drifter]

I see what you said there... and I concur!

Zip: 06790

[gross2]

Read and agree.
Zip 01062

[Major Ho]

"The money back thing is ok with me!!"
Read it and agree.
Zip Code: 22030

[Mayvik]

in my experience fedex seems to take far more care with packages than ups. and I think fedex ground is just as cheap or cheaper. just my own anecdotal experience...

In my experience FedEx just leaves packages lying around in public places (like busy hallways of apt complexes) unless you tell them not to 209384039843049 times. I'd rather my neighbor's sketchy kids didn't wind up with my compressor :(

[kenjay]

I've read and fully accept all terms. Zip code: 07758

[PB_RoB]

"The money back thing is ok with me!!" AND YOUR ZIP CODE. When we get units ready to ship, we will pm you with a shipping cost and a total price. You will need to paypal the money into our account and it will be on its way. Remember, you need to post that you read and understand the limited warrantee and your zip code. Thanks everyone! Looking forward to a successful roll out. Tom Kaye

I agree to all terms and please put me on the list - Zip 32927
:D
Rob

[AGD]

Ian Burnett from facebook "i also agree with the warranty post code ph344ep"

[oldironaz]

i have read the 30 day money back is ok with me !! my zip is 85361 thanks much!!!

[hmcl281]

good luck with the compressor, think it's a great idea and no way did i think it would get done so fast

i'm to broke right now to agree with the warranty terms, but plan on getting one soon

[dhock2001]

I agreed to the terms and conditions. Please sign me up for one Zip code 48360.

[Marcos Duarte]

I have read and accepted the conditions on the sale of one shoebox compressor.

My zipcode is: 33322

Thanks Marcos

[blades]

I have read warranty, I agree. Zip code 53223 ( my shop)

My only issue is PayPal. I do not have an account with them, and do not wish to create one.Alternative payment method?

Use will be to top off unit reservoirs when my scubas are low or in the case of my Walther just up to the sweet spot after primary filling from tank.
My best to your endeavors, Thanks.

[garbageman705]

I have read the terms and conditions. i want one. You put your name on it, I know it's going to be good.

98362.

[p8ntbal4me]

I have read and accepted the conditions on the sale of the shoebox.

My zipcode is: 03275

[dhock2001]

I agreed to the terms and conditions. Please sign me up for one Zip code 48360.
oops I ment zip code 48362, Don H

[smallflame]

The money back thing is ok with me!!

My zip code is 27545

This will be great, I'm just getting into PCP airguns and getting a tank fill has not been very convenient.

Thanks,

Small Flame :hail:

[racerx91]

I have read and agree ! 49799

[haywire1]

I agree to the terms and conditions. Please sign me up for one. Zip code 47025.

[bri113]

I fully agree with the terms and conditions.

my zip is 60045
thanks!

[evan95]

The money back thing is ok with me!!

V1W4T6

[MikeB]

I agreed to the terms and conditions. Please sign me up for one Zip code 89142.

[AGD]

We will begin contacting people today for Paypal payments. Expect PM from AGD with instructions.

AGD

[joeyt]

We will begin contacting people today for Paypal payments. Expect PM from AGD with instructions.

AGD

hi tom

saw on facebook you'll have 3k compressors soon. do you have a ballpark time frame?

thanks.

[nalby]

excellent

[DoubleDutch]

We will begin contacting people today for Paypal payments. Expect PM from AGD with instructions.

AGD

Great news!

I have cash in my PayPal, I would be willing to send the money as a "personal payment" to save you guys the fees if you'd like. I seemed to me that in this whole project, the customer wants and needs were more important than the profit, so I'd rather you guys get a few extra bucks than PayPal.

[AGD]

Guys,

My wife Carol will be doing most of the PM's through my AGD account. I appreciate that some of you might want to pay via some other method especially to save us money(which we appreciate) but we are just trying to expedite these out the door.

BELIEVE ME, the first 100 are money loosers no matter how you cut it. I would like to get them shipped so I can go back home.

Thanks,

AGD

[kenjay]

Will be anxiously awaiting PM. :D Ready to pay through paypal as soon as possible. Just realized how hectic it's going to be when thousands of these things are being built up..MUCH LUCK TO YOU GUYS!

[DevilMan]

WOOT WOOT!!! PM received/replied... thanx again TK!!!

DM

[kd4arf]

Guys,

My wife Carol will be doing most of the PM's through my AGD account. I appreciate that some of you might want to pay via some other method especially to save us money(which we appreciate) but we are just trying to expedite these out the door.

BELIEVE ME, the first 100 are money loosers no matter how you cut it. I would like to get them shipped so I can go back home.

Thanks,

AGD

Tom,

How much does paypal charge??? I will try and include the extra....Looking fwd to the Private Message

Steve Haynes

[Thanna]

"The money back thing is ok with me" 95054

[smallflame]

I've never been so ready to send away money.

[CrazyLittle]

The money back thing is ok with me!! (IE, I read "the long winded diatribe" and understand.)

94610

[Mayvik]

Aaaaah..I'm checking my PM box so often I'm afraid it's going to break!

[clapinski]

I have read and agree to your terms.

48357

[AGD]

Jackie Lau read and agreed. 91030

[Sneaky Sir]

O man, just got an email from UPS saying mine was shipped

:wow: :dance: :shooting: :clap: :eek:

I can't wait!

[p8blr]

I wanna see some youtube videos from you guys! :)

[dmorley12027]

I agree to the 30 day return policy. Dave Morley 12027

[Guardian]

Got the shipped PM this morning and got the Shoebox this afternoon :wow: :ninja: So when are you going to sell one of those star trek teleporters ?

Thanks a bunch :cheers:

[iphoneuser11]

Jackie Lau read and agreed. 91030


I finally got through with registration on the site, whoo hoo!

Read and agreed, 91030. Just lmk what the next step is!

[dmorley12027]

How do we find out if we've made the cut?

[Ruler_Mark]

I have read and agree to the conditions.

My Zip 32608

[AGD]

Everyone so far has made the cut. We will be shutting off orders very soon.

AGD

[onecaribou]

Conditions read and agreed to.

Please count me in for one to 29169.

Thanks!

[SSP REAPER]

Just got my PM for shipping/payment info :clap: :hail:

[dirty907]

Read, understood and agreed. 99615

[TheePsycho]

I have read and agree to the conditions.

My Zip 53228

[p8ntbal4me]

So all we do is wait for the PM to come?

[AGD]

So all we do is wait for the PM to come?

YEP! AGD

[rschoi_75]

Read through and agreed to terms..... 91207

[marauder25]

Hi Tom,Made it in . I agree to the 30 day return policy and my zip is 98032.Regards, Doyle.

[kd4arf]

6-7-10
1302hrs

Hello Tom,

I have read and understand the limited warrantee.

My zip is 23322

Regards and thanks for making it available!


R. Steve Haynes


I would encourage everyone to include an extra 3% in your order. Tom is already taking a hit and he will get nailed wiith about 3% paypal charges.

I did and got a very nice message back from carol....made it all worthwhile....

Lets help him out for doing this for us!!!

Steve

[Ando]

Just send it personal. If you can't trust Tom who can you trust. ;)

[jdonovan]

I've read your terms and agree with the no warranty/money back only

Zip 20187

[patrgro]

The money back thing's just fine by me. 60618--I'll even pick it up, if possible.




ShoeBox Compressor Important Information, 30 Day Money back YES---
Warrantee NO


This is an important explanation of the warrantee situation on the
compressor. As may of you know from the past, I fixed Automags for
free for many many years after they were sold. In order to give you
the least expensive price on this compressor, I can not give this
type of warrantee again.

As an example, if the compressor was priced the same way I priced
the Automag (based on a multiple of the actual parts cost), it would
be 1,200 dollars. You made it very clear to me on the forms that if
it was priced at 500 dollars or more, you were not interested. So I did
my job and brought it in under 400 dollars and still reduced the
fill times by 5x from the original estimates.

The other problem with a compressor vs a marker is the amount of run
time. You can't possibly shoot a marker 24/7 but some of you will
turn on this compressor and let it run non-stop until it breaks.
Many of you will try to over pressure the system to shorten your run
times and there is no way I can control that. The sharp guys will
fiddle with the gearing to tune it to the max and in the process
melt something down. I can't be responsible for these things.

Again in order to keep the price down, I will not have a phone line
for tech support. I will be answering tech questions on the new
compressor forum here. I am also working on getting Tuna and others
to do tech support. I am using the Autococker model in this case.
Budd didn't do much tech support but the dealers loved him because
everyone came in to the shops for support. As you see with the hose,
there will be lots of ups and extras that you can get for the
ShoeBox from your dealer.

I don't want anyone to feel like they got ripped off from owning one
of my products, so I will offer a 30 day MONEY BACK NO QUESTIONS
ASKED policy. You have to pay for the return shipping. I will refund
the original price of the compressor (but not the original shipping
to you). If you buy it from a dealer, you have to get your money
back from the dealer and then I will refund the dealer directly. If
you didn't give me the money originally, don't expect me to fix a
problem you have with a dealer.

If you get one of these units, plug it in, and a part breaks in half
due to a manufacturing defect, I will repair or replace the unit at
our discretion. If you give me grief, I reserve the right to give
you your money back.

So that is the bad news, but here is the good stuff. Most of the
small parts even up to and including the pistons, can be purchased
reasonably online at McMaster Carr. This includes the chains,
sprockets, bushings, bearings, pressure fittings, pressure tube,
axles, clips, bolts and some of the orings. You can literally
rebuild every wear part in the unit from McMaster. I will also have
an online store with replacement parts soon.

How long will it last? Thats a question many of you are asking right
now. In fact we just don't know. I have tried to kill the prototype.
Beemer is trying to kill a production model right now. We hooked one
up at 650 rpm (the stock speed is 200) and it jumped across the
floor....for 15 minutes...(Beemer hid in the other room)...it
finally stopped pumping a few minutes later (but didn't stop jumping
around) so we shut it off. The excessive heat had melted the
delrin backcheck but NOT the high temp oring (got to love viton). We
have never worn out an oring or piston or cylinder in all the weeks
of testing. The only thing that stops it pumping is high heat from
compression melting something because you over reved it or a flake
of crap getting wedged in the backcheck valve.

So if you have actually read to the end of this long winded
diatribe, you are one of the guys I want to sell the first batch
too. This is actually the official order list. To be officially on
the list you need to reply in this thread with something like "The
money back thing is ok with me!!" AND YOUR ZIP CODE. When we get
units ready to ship, we will pm you with a shipping cost and a total
price. You will need to paypal the money into our account and it
will be on its way. Remember, you need to post that you read and
understand the limited warrantee and your zip code.

Thanks everyone! Looking forward to a successful roll out.

Tom Kaye

[Sneaky Sir]

Got my Shoebox today. Must say I'm very impressed with it, its a very neat little contraption :cool:

[marauder25]

Just bought an SCBA tank and hose to go with the minni compressor :bounce:
Hey Carol,I'm ready to pull the trigger(pun intended)

[Two Dogs]

"The money back thing is ok with me!!" I have read and understand the limited warrantee. 47586

[CaseyE]

Read and accepted the terms. Zip 28806

[CaseyE]

Read and accepted the terms. Zip 28806


How 'bout one for your buddy Casey? I'll be your best friend!

[AGD]

All,

We are close to closing the order list for the first run. If your on this order thread, your on the list. There have been several emails from customers thinking they didn't make it. At this moment, if your on the list, you will be getting an email from us but it could take several weeks.

We are only building 2 a day so please stand by.

Thanks

AGD

[Ghos-tman]

I have read the policy and agree with it completely. I hope i make the cut, 51046.

[redgmc1]

I have read and accept Russ Meyer 67212
ShoeBox Compressor Important Information, 30 Day Money back YES---
Warrantee NO


This is an important explanation of the warrantee situation on the
compressor. As may of you know from the past, I fixed Automags for
free for many many years after they were sold. In order to give you
the least expensive price on this compressor, I can not give this
type of warrantee again.

As an example, if the compressor was priced the same way I priced
the Automag (based on a multiple of the actual parts cost), it would
be 1,200 dollars. You made it very clear to me on the forms that if
it was priced at 500 dollars or more, you were not interested. So I did
my job and brought it in under 400 dollars and still reduced the
fill times by 5x from the original estimates.

The other problem with a compressor vs a marker is the amount of run
time. You can't possibly shoot a marker 24/7 but some of you will
turn on this compressor and let it run non-stop until it breaks.
Many of you will try to over pressure the system to shorten your run
times and there is no way I can control that. The sharp guys will
fiddle with the gearing to tune it to the max and in the process
melt something down. I can't be responsible for these things.

Again in order to keep the price down, I will not have a phone line
for tech support. I will be answering tech questions on the new
compressor forum here. I am also working on getting Tuna and others
to do tech support. I am using the Autococker model in this case.
Budd didn't do much tech support but the dealers loved him because
everyone came in to the shops for support. As you see with the hose,
there will be lots of ups and extras that you can get for the
ShoeBox from your dealer.

I don't want anyone to feel like they got ripped off from owning one
of my products, so I will offer a 30 day MONEY BACK NO QUESTIONS
ASKED policy. You have to pay for the return shipping. I will refund
the original price of the compressor (but not the original shipping
to you). If you buy it from a dealer, you have to get your money
back from the dealer and then I will refund the dealer directly. If
you didn't give me the money originally, don't expect me to fix a
problem you have with a dealer.

If you get one of these units, plug it in, and a part breaks in half
due to a manufacturing defect, I will repair or replace the unit at
our discretion. If you give me grief, I reserve the right to give
you your money back.

So that is the bad news, but here is the good stuff. Most of the
small parts even up to and including the pistons, can be purchased
reasonably online at McMaster Carr. This includes the chains,
sprockets, bushings, bearings, pressure fittings, pressure tube,
axles, clips, bolts and some of the orings. You can literally
rebuild every wear part in the unit from McMaster. I will also have
an online store with replacement parts soon.

How long will it last? Thats a question many of you are asking right
now. In fact we just don't know. I have tried to kill the prototype.
Beemer is trying to kill a production model right now. We hooked one
up at 650 rpm (the stock speed is 200) and it jumped across the
floor....for 15 minutes...(Beemer hid in the other room)...it
finally stopped pumping a few minutes later (but didn't stop jumping
around) so we shut it off. The excessive heat had melted the
delrin backcheck but NOT the high temp oring (got to love viton). We
have never worn out an oring or piston or cylinder in all the weeks
of testing. The only thing that stops it pumping is high heat from
compression melting something because you over reved it or a flake
of crap getting wedged in the backcheck valve.

So if you have actually read to the end of this long winded
diatribe, you are one of the guys I want to sell the first batch
too. This is actually the official order list. To be officially on
the list you need to reply in this thread with something like "The
money back thing is ok with me!!" AND YOUR ZIP CODE. When we get
units ready to ship, we will pm you with a shipping cost and a total
price. You will need to paypal the money into our account and it
will be on its way. Remember, you need to post that you read and
understand the limited warrantee and your zip code.

Thanks everyone! Looking forward to a successful roll out.

Tom Kaye

[thecat1]

I argee with the money back thing and everything else!
Morris W
ZIP: 38135 :dance:

[Voltar1]

Money back is an amazing offer but I am happy to say won't be needed!

BTW am I the only Canadian Shoebox Fan?

Walter..... testing S/N 023 for airgunners. Working awesome!

[Mark1]

I have read the policy and agree with it completely. I hope i make the cut, 99688. Thanks

[GP35]

I have read and agree to the conditions of your 30 day return policy My zip is 98104.

Thanks

[macgeo]

The money back thing is ok with me! zip code 42240. thanks

[freem243]

I have read and accepted the conditions on the sale of the shoebox.
My zip code is 48463
Thanks,
Mike.

[WChia]

I have read and agree to the conditions of your 30 day return policy My zip is 94536.

Sincerely
Win

[AGD]

**** WE ARE OFFICIALLY CLOSED FOR ORDERS ******

At this point we have as many orders as we can handle for this first run of 100 units. Many people are not getting back to us with payment etc so we don't know if this is the actual end or not. Your welcome to continue to sign up here but we can't guarantee you a spot in the first run. We will however take you first in the next run in about 8-10 weeks.

Thanks for making the ShoeBox and my return to paintball a great success!

Tom

[riverside]

would like in on your shoebox compressor in either run and fully accept your terms...zip 56763

[evan95]

Money back is an amazing offer but I am happy to say won't be needed!

BTW am I the only Canadian Shoebox Fan?

Walter..... testing S/N 023 for airgunners. Working awesome!

No definately not the only Canadian shoebox fan, not even close.

[AGD]

I have read warranty, I agree. Zip code 53223 ( my shop)

My only issue is PayPal. I do not have an account with them, and do not wish to create one.Alternative payment method?

Use will be to top off unit reservoirs when my scubas are low or in the case of my Walther just up to the sweet spot after primary filling from tank.
My best to your endeavors, Thanks.

Sorry, Paypal is the only method of payment we can accept at the moment. We expect that to change in the very near future, perhaps with the second production run, but we don't have an exact date yet. We do want to accommodate everyone, so please bear with us.

[BenoitOWN]

Sorry, Paypal is the only method of payment we can accept at the moment. We expect that to change in the very near future, perhaps with the second production run, but we don't have an exact date yet. We do want to accommodate everyone, so please bear with us.

Paypal doesn't require a account to use them. You can send an invoice by e-mail and he can pay with a credit card.

[Skimboardbeast]

I have read and agree to the Terms and Conditions! This thing looks awesome!!
19947
Thanks.
Avery W.

[Jerryco911]

I have read, and agree to the terms and conditions of the sale of the shoebox. My zip. 64130 Thanks Jerry

[blades]

To AGD: I was just told about this and checked it out. Is it possible to due the invoice route as suggested in post 131, seems simple enough. You would still be using your paypal account and I do not need to become involved with creating an account. I was #68 on list.
Little History years back I had an account with pp, it was hacked, it was never resolved, was pricey to me, so net result is I stay away. Direct contact [email protected]
Remove "0" for address. Thanks Chris

[AGD]

By the time we get to the next batch we will have an online website setup that you can purchase using credit cards etc. The paypal was just for the first batch to get things going quickly.

Tom

[rgall613]

I have read and agree with your warranty ,
my zip is 11901

[nsmont]

Incredible product....
I live in Canada, but close to the US border (and I have a US Address I can use), I was wondering if I could get a quote for both addresses (when ever I get into the line-up). Anywho, I agree with the warrenty terms.
US Zip Code 48060,
Canada Postal Code N0N 1J0

[steve ornouski]

I have read and agree to the conditions of your 30 day return policy My zip is 95368

[Gary H.]

I have read and agree to the conditions of your 30 day return policy My zip is 95368
I have read and agree to the 30 day return policy. My zip is 45345
Thanks
Gary

[THead75]

I have read and agree to terms of sale. My zip is 02908. I would like the 4500 version.

[fredfable]

I read the long speech, I'm O.K with yor sale terms, My zip code is 60608.

Thanks

[AutomagSniper]

Full agreement here, slap me on the list!

ZIP - 54614

[thecat1]

I am #120 on the list, could you tell how much of a wait i got?
The Cat :dance:

[AGD]

Hard to say, 8 weeks minimum.

Tom

[AutomagSniper]

Sweet! I'll be through basic training by the time it's my turn. :D

[thecat1]

Received my shoe box today, up and running! It is GREAT! My tank started out with 2500psi, it went to 4500 in 45 min. No more dive shop for me.

[ShoeBox Tech]

Received my shoe box today, up and running! It is GREAT! My tank started out with 2500psi, it went to 4500 in 45 min. No more dive shop for me.


:eek: 2000psi in 45 minutes? No way. :wow: What input pressure from shop compressor.
Did it shut off at 4500psi?

How much were you paying at the dive shop for what pressure fill and did you get what you paid for after cool down?

[crum55]

"The money back thing is ok with me!!" 24088

[boomhowe]

I have read and agree to terms of sale. My zip is 35057. I want the 4500 version

[jason connelly]

i have read the warrenty and the money back thing is fine with me my zip code is 29127 will there be both the 4500 and the 3000 psi systems in this run?

[AGD]

We will be making 3000 psi units in this run. Probably about 100 or so. Please specify here so I can get a feel for the demand.

Tom

[thecat1]

:eek: 2000psi in 45 minutes? No way. :wow: What input pressure from shop compressor.
Did it shut off at 4500psi?

How much were you paying at the dive shop for what pressure fill and did you get what you paid for after cool down?

I just wanted to top of tank from 2500 to 4500. I was paying $4.50 for 3000 psi tanks and
$9.00 for 4500 psi tanks. Input pressure was sat at 90 to 100 psi. It took 30 minutes to go from 2500 to 3700. Once it hit 3700, it jumped up real fast to 4300!!! It shut off st about
4380 and 4430, i rounded up to 4500. Close enough for me

[jason connelly]

We will be making 3000 psi units in this run. Probably about 100 or so. Please specify here so I can get a feel for the demand.

Tom

i am looking to buy a 4500 and a 3000 psi if you have enough for me to buy one of each if not i will only want the 4500 psi system

[lost coast]

I read your terms of sale no warrenty , 30 day money back. I will agree with that. I want one of the 3000 psi units. my zip is 95589.

[njnoodles]

I have read and agree to terms of sale. My zip is 08831. I want the 4500 version

[cajun100]

Put me down for one, please. 3000 PSI version. I accept all conditions of sale and implied warranty. ZIP code 94941

[Wildbill3]

Hello Tom,

I just learned of the ShoeBox and would love to get my hands on one.

I have read that you are done with the first production run, but may have some left over from non payers, etc.

I have read the warranty agreement and have no problem with the 30 day money back deal

I have the cash in hand to purchase and would jump at the chance to own one of these as I am going to be moving away from an HPA source later this year. It will literally take me 4 hours to get HPA after I move.

Anyways, I am in NC zip 27606 (for the next month or two at least)

Let me know if any are available.

Thanks

Oh and i would like the 4500 psi version

If i get put on the list for the next run (fine by me, still want one) please double check with me to see if my zip has changed

[clied03]

I have read and agree to the conditions, im looking to the 4500 version, zip 78853.
Thanks.

[sqyire]

I have read and agree to the conditions. 4500 PSI version please.

My Zip is 04401

[b0urne]

I have read and accept all terms.
Zip code: 77025.
Interested in 4500psi version.
Thanks.

[city_hunter357]

i have read terms fine with me would like the 4500psi my zipcode is 99507

[gsumner21051]

I read your "long winded
diatribe" and understand and agree. Zip is 18704. Hope there's a chance I can still get one!

4500 psi version please

[Grafdesgn]

I have read your money back statement and agree completely,

I live in the 95472 area code. I would also like the 4500 psi compressor.

Thank you for your great work

[Maj Tom]

I have read and accepted the conditions on the sale of the shoebox and the conditions of the 30 day warranty.

My zipcode is: 48350 And would like to request a 4500psi version

Thanks John

[gamohunter]

I have read and agree to the conditions of the non-warranty, I would like a 4500 PSI Unit Please my zipcode is 52501

Also wondering if the pressure switch can be changed for regulation of the PSI (or is adjustable)

[sneeky peek]

hi there at AGD
I have read and accept the conditions and would like to purchase a number of compressors. I would be willing to pay shipping charges etc etc
I am the owner of Action Paintball Enterprises. We wholesale and retail via our stores Inspekta gadget and Point Blank. www.inspectorgadget.co.za and www.point-blank.co.za
We have been involved in the paintball industry since 1991 and we would love to act as your distributor here in South Africa.

SOUTH AFRICA
3202
[email protected]

[ShoeBox Tech]

Also wondering if the pressure switch can be changed for regulation of the PSI (or is adjustable)

No it is not adjustable. The first run was 4500psi. You could shut it off sooner by hand though if you wanted. We will have a 3000psi and 4500psi shut off in the next batch.

[tjbryner]

I have read and agree to the conditions of the non-warranty, I would like a 3000 PSI Unit Please

my zipcode is 17082

[oldgoat]

I have read and agree to everything. Can I still get in on ordering one? I want a 4500 psi version. My zip is 62656

[gsumner21051]

oops, didn't see my origianl post. thought it got deleted!

[Core2]

I have read and accepted the conditions on the sale of the shoebox.

My zipcode is: B2Z 1E6 (Canada)

[jdollar]

i have read and accept the terms of sale. zip code 93657. i would like a 4500 psi unit

[Mikey B]

I have read and accept the terms of sale.

Zip code 89445 and a 4500 psi unit would be great.

[crboy]

The money back thing is ok with me! 4500 is fine with me.
Postal code V9W6A9

[bumps991]

I agree to your warranty terms and would like a 4500 psi unit.
My zip code: 53953

[mizell]

We will be making 3000 psi units in this run. Probably about 100 or so. Please specify here so I can get a feel for the demand.

Tom
I have read and understand the conditions, I am interested in a 3000 lb, shoebox, my zip is 62095

[MQcyclist]

I have read and accept the terms and conditions on the sale of the shoebox.

My zipcode is 91706

Model with 4500 PSI please.

[Excope]

I have also read the terms of sale, 30 day money back, no warranty. I agree to them and would like to be on the list to get one. Zip is 38464. Oh, forgot to mention, I need the 4500psi model.

[G-Smith]

"The
money back thing is ok with me!!" zip code 22630. I would like to get 3,000 psi one.

[fredfable]

hi fellas, I've posted before with #141.
Just to let you Know, I would like the 4500 psi model.
When you think this model will be available?
Thanks. Fred. :)

[John K]

I fully understand the terms of contract and would like to order a 4500 PSI unit.
My zip is 55358 Thanks, John

[Wildbill3]

Any updates on the timeline for release of production run #2?

[AGD]

I am now back in Chicago gearing up for the second run. The sheet metal parts are mostly produced but there was a delay on the machined parts. I hope they will start shipping in about 4-5 weeks.

Tom

[qho]

Put me on the list for the 3Kpsi version, zip is 91790. No warranty and 30 day money back is ok with me. Thanks TK for making it affordable and safe.

[tiger123]

I have read the 30 day money back is ok with me my zip is 15129 4500 psi plz

[Wildbill3]

I am now back in Chicago gearing up for the second run. The sheet metal parts are mostly produced but there was a delay on the machined parts. I hope they will start shipping in about 4-5 weeks.

Tom


thanks for the update i cant wait to get one of these things!

[Mitch938]

I fully understand the terms of contract and would like to order a 4500 PSI unit.

My zip code is 96094

Thank you!
Mitch

[tommyo28]

I have read and agree on conditions. I would like a 4500psi model compressor.

My zipcode is 11772

Thanks

Tommy

[cajun100]

Tom, I would like to change from 3000 to 4500 psi model. With the output pressure switching idea covered elsewhere on the forum allowing 3000 to 4500 range), seems like the best way to ensure the unit purchased is the most usable (and marketable to others, if necessary).

Zip 94941.

Understand and agree with warranty and related terms and conditions.

[Tunaman]

I have read the \"30 day money back - no warranty\" statement and it\'s fine with me.... I want a 4500 psi compressor.... My Postal code is V0X 1G0 in BC Canada.... I would appreciate a quote including postage to the address below.... UPS and FedEx charge about $50 brokerage fees on top of duty and taxes so I really want it shipped by USPS....

Could you please assist me in registering at the forum.... or at least get me on the list for a 4500 psi compressor?....

Thanks....

Bob Sterne,
Box 3B, Comp. 10,
1841 Main Street,
Coalmont, B.C.,
V0X 1G0, Canada
(250) 295-4355
[email protected]

[mtuepker]

I have read and agree on conditions. I would like a 4500psi model compressor. My zipcode is 05482. Is there any sort of ETA for the 2nd shipment or word if the 2nd shipment is all spoken for already?

Thanks,
Marcus Tuepker

[AGD]

The 2nd run is 500 units so there will be plenty to go around. :)

Tom

[rsterne]

I had a heck of a time getting registered to get on the list for a compressor (#190).... Thanks to Tunaman & Beemer for your help.... :clap:

Bob

[cayossarian]

"The money back thing is ok with me!!" 94582

4500 psi please

Thanks,

Bill

[Wildbill3]

Tom,

As i understand the second run will start shipping in a few weeks or so, I am hopefully high enough on the list to get one.

With that in mind I was wondering if there was a budget compressor you recommended over others....

I currently own a craftsman 1 hp 3 gal. 2.4 scfm @ 90 psi
its not the greatest compressor but its served its purpose up to now not sure how well its going to work with the shoebox though....

Let me know what you or anyone else thinks

Thanks

[BadBob]

I have read and accepted the conditions on the sale of the shoebox.

My zipcode is: 98251-9527

Thanks Tom

[mrricht]

Tom,
I would like to order one of those shoeboxes...(4500 psi)
The money back thing is ok with me!!
Zip Code: 60948 (overseas)
Thank you.

[Carl73]

I have read and agree. I would like a 4500psi shoebox to 76137
thanks
Carl

[idontknowjack]

I have read and agree. I would like a 4500psi shoebox to N0J 1V0.
Thanks,
-Brad.

[SunDance]

I have read and agree. I would like a 4500psi shoebox to 02860
Thank You
Ray

[GoldStar]

I have read and accepted the conditions on the sale of the shoebox in 4500 psi.

My zipcode is: 83713

Thanks,
Ken
:dance: :bounce: :clap: :cheers:

[Sgt.McRuff]

"The money back thing is ok with me!!"
4500psi
20016

THX

[flshock]

The money back thing is OK with me. I would like the 3000psi model. My zip code is 26147.

[*saint*]

The money back thing is OK with me. I would like the 3000psi model. My zip code is 92284.

[oldgoat]

Hello Tom. Can you give us an update on the second run of ShoeBoxes? I am running low on air here! LOL!

[AGD]

There have been delays on a few critical parts that are preventing us from starting assembly. Hope to get it worked out soon. I don't have a new date when we will start shipping yet.

Tom

[trxtr]

Tom the first product of yours I owned, a Micro CAII, I still use to this day (with the original seals). I don't expect to be asking for my money back.

4500 PSI Shoebox
Zip 96713

No rush..

[Ricke333]

The money back thing is OK with me. I would like the 3000psi model. My zip code is 50401.

[rj11248]

"The money back thing is ok with me!! zip 19933

Is there a price difference in the 3000 and 4500 models?

[kevinkunkle]

The money back is ok with me. 4500psi zipcode 18846

[BlackBagOps]

I have read and agree to the conditions of your 30 day return policy.
4500 PSI Please =)
ZIP: 95030
Thanks!

-Click

[Picudo]

I've read and agreed to your conditions.
30 day money back. Cool.

zip 77099. 4500 psi

Thanks!! :)

[jpsgunworks]

I've read the conditions and agree to them, 30 day moneyback yes, warranty no.
Zip 14092 or might get you to ship it to me in Ontario, Canada depending on when it
becomes available. Thanks!

[dvu0704]

I have read and accepted the conditions on the sale of the shoebox in 4500 psi.

My zip code: 92844

Thanks...

[willy0311]

I read the warranty and agree. Cant wait thanks 65265

[LoveMyTalonSS]

Read and understood.
06807

[BlackBagOps]

Out of curiosity. How are things going with batch #2? Any Idea on a shipping or assembly date? My trigger finger is itching but my wallet is missing.... I need air!


-Click

[rick'o'shea]

Hi
Read and understood! 4500 psi please. Canada L7R 2C8

[AGD]

There have been production delays unfortunately. I need to be positive that everything is absolutely right because we are making 500 in this batch. I hope to start assembling at the end of this month or so.

Tom

[Millertime]

I read and understand the limited waranty and the
money back thing is ok with me. 40324

[El Camino]

There have been production delays unfortunately. I need to be positive that everything is absolutely right because we are making 500 in this batch. I hope to start assembling at the end of this month or so.

Tom
Tom,
Is this batch 4500psi and 3000psi, or just one or the other? THX

[ralphtonka]

I have read and agree w terms, Canada t8w2v5

Darren

[AGD]

Both 3000 and 4500 in this batch. You can order either when we contact you.

Tom

[rayfox]

Read your post and the 30 days money back offer and no warranty is fine with me. :dance: Put me down for one 4500 PSI unit for zipcode 00936 in Sunny San juan, Puerto Rico. Can this unit be shipped via USPS Priority Mail? Would it fit in the large flat rate box?

Thanks,

Ray

[tURKEY hunter]

I have read and agree 74066 turkey hunter :clap:

[tURKEY hunter]

for got to put size 4500 thanks 74066

[Wildbill3]

Tom,

Its been a few weeks since I last checked this thread, just wanted to see if there were any updates on the parts for assembly and the shipping time frame.

[AGD]

Still delays. Might get something out mid Nov at the earliest.

Tom

[Wildbill3]

Still delays. Might get something out mid Nov at the earliest.

Tom

No problem, keep all of us posted.

On a personal note I will be out of the country from mid December to mid January (perhaps longer I am still working the details out) and my ability to get to email and the forum will be greatly limited so if shipment is delayed further I wanted you to be aware of my circumstances.

I only mention it because if you should try to contact me and I am slow in my response this is most likely the reason. I dont want to lose my place in line and let me assure you, I STILL WANT IT!!!

Let me know if we should make arrangements prior to my leaving.

[liamsblade]

I've read and accepted the terms. I'd like a 4500 psi and my zip is 77373.

[AGD]

Wildbill,

I appreciate you letting me know. When your getting ready to leave post here and I will make sure you don't get bumped.

Tom

[Wildbill3]

Wildbill,

I appreciate you letting me know. When your getting ready to leave post here and I will make sure you don't get bumped.

Tom

I certainly will, thanks!!!

[roachcreek]

Read and agree .
Zip 46970
I am glad you have gone out on a limb to produce this for us, it was a finacial risk for you , but so greatly appreciated. I would like mine to be a 4500 PSI.

[NorthFork]

I have read and accepted the Terms and Conditions concerning the sale of the Shoebox Compressor.

Zip Code: 95603

[willpgn1020]

Have read and agree to the money back/no warranty terms
4500 version please
Zip 27317
Thanks.

[tomsz]

I read and understood the conditions of sale and that the Shoe Compressor has 30 Day Money back and NO Warranty.

Need 1EA 4500psi

ZIP code: 13669

Thank you,

Tom

(tomsz)

[undrpressure]

I read and accpet the conditions of sale and that the Shoe Compressor has 30 Day Money back and NO Warranty.

Need 1EA 4500psi

zip: 44125-4747

Cheers and everlasting gratitude!

Tim

[Blorgensplor]

I've read and agree to the terms and conditions.

Put me down for a 4500 psi to zip 25649

[AGDRetro]

I agree to your terms and conditions sir.

I will need 1 4500 psi model, my zip code is 17522 (may change to 17501 by the time this next batch is finished).

-Shuey

[magnumair]

Tom I accept your money back with no warranty is fine with me. I'm from Canada and my postal code is L3B - 2K4. I would like the 4500 p.s.i. Shoebox.


Thank You,

George.

[VictoryX]

I have read and accepted the conditions on the sale of the shoebox.
I will like a 4500 psi. My zip is 55103.

Thank
Ge

[bigblues]

I've read and agree to all terms stated. 4500psi needed. zip is 01515

[Millertime]

Sorry I forgot to put I want a 4500 psi model in my agreement post.

[metaldogfish]

The money back thing is ok with me!! I agree to all terms! #4500 psi
zip 26501

[AGD]

We are no longer using this forum for the "On Order List". You can now get on the order list by visiting www.shoeboxcompressor.com and going to the order tab. No sign ups required and you will see where you are on the list.

We strongly advise you sign up for the ShoeBox Forum which is also accessible by a tab on the website. All announcements will be through the forum. Sign up is now instant with the new forum software.

The website is still under construction so please pardon our dust!

Tom Kaye