IT 'Mag Body

[Walking Stick]

I can't find much about this body because the search engine won't search "IT".

Can anybody fill me in or link me to info on these bodies?
- manufacturer
- AM/MM or RT/E length
- barrel/feedneck/detent threading
- close-up pics

Thank you!

[Drix]

I take no responsibility for this easily attained quote that was found here (http://www.lmgtfy.com/?q=%22IT+body%22+paintball) .

IT (Intimidation Technologies) bodies were originally made by Extreme Depot out in California, and it is rumored there are only 75-100 of them floating in the wild. Half did not have the clip and ring and the other half did. I have owned two, and sold one to Redic along with a bunch of other items. I still own a gloss black one today and the fair market value on them is $140-$170 depending on condition.
Hope this helps

Takes Angel feednecks and cocker detents/barrels


http://i35.tinypic.com/286wxhs.jpg
http://i34.tinypic.com/29x7ivr.jpg
http://i37.tinypic.com/5nvlau.jpg

[Smoothice]

IT (Intimidation Technologies) bodies were originally made...

Looks like you found that info here: http://www.bigevilonline.com/showthread.php?t=5001

That site you linked to is hilarious by the way :rofl:

[Walking Stick]

Drix: Yeah, I did Google it but I didn't use the fancy quotation marks like you did--apparently it makes all the difference. Thanks for the education and info though.

Smoothice: Thanks for the link!

[Drix]

Anytime I can help :cheers:

[factoid]

LMGTFY is my favorite site in the whole world.

This comic also sums these situations in the tech support world:

http://xkcd.com/627/

[Drix]

LMGTFY is my favorite site in the whole world.

This comic also sums these situations in the tech support world:

http://xkcd.com/627/

I'm printing that for my grandparents

[mpsd]

There aren't many of those. Less than 30, I believe. Some of these had detents and or feedneck problems and the early ones didn't have the washer and c-clip, which may cause bolt problems as well. Be carefull and try testing before buying.

It also good to know that they are made of a different type of aluminum compared to AGD parts and that they are not made from an original AGD slug.

Still, they are some of the most beautifull ones ever mad, IMHO.

Here are some pics of mine:

http://i181.photobucket.com/albums/x299/mpsd18/DSC03977.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC03978.jpg
http://i181.photobucket.com/albums/x299/mpsd18/IMG_0383.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC01977.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC01794.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC01757.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC01755.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC01747.jpg

Look for more pics here: http://s181.photobucket.com/albums/x299/mpsd18/?start=all

:cheers:

[Frizzle Fry]

I've owned two, and I know the current owners.

I recall there being 100-200 bodies total, who knows how many made it (at least 3 were used sans-washer/clip and rendered non-functional). I do know it's a hell of a lot more than 30.

[SSP REAPER]

I take no responsibility for this easily attained quote that was found here (http://www.lmgtfy.com/?q=%22IT+body%22+paintball) .

IT (Intimidation Technologies) bodies were originally made by Extreme Depot out in California, and it is rumored there are only 75-100 of them floating in the wild. Half did not have the clip and ring and the other half did. I have owned two, and sold one to Redic along with a bunch of other items. I still own a gloss black one today and the fair market value on them is $140-$170 depending on condition.
Hope this helps

Takes Angel feednecks and cocker detents/barrels


http://i35.tinypic.com/286wxhs.jpg
http://i34.tinypic.com/29x7ivr.jpg
http://i37.tinypic.com/5nvlau.jpg
LOL that's the info I posted over on BEO. Here's the thread link.
http://www.bigevilonline.com/showthread.php?t=5001

[zondo]

Ah... I didn't realize there was a gap for RT length rails. Is it about 3/4" from where the barrel threads to the front edge of the rail?

[SOUP]

There aren't many of those. Less than 30, I believe. Some of these had detents and or feedneck problems and the early ones didn't have the washer and c-clip, which may cause bolt problems as well. Be carefull and try testing before buying.

It also good to know that they are made of a different type of aluminum compared to AGD parts and that they are not made from an original AGD slug.

Still, they are some of the most beautifull ones ever mad, IMHO.

Here are some pics of mine:

http://i181.photobucket.com/albums/x299/mpsd18/DSC03978.jpg

Look for more pics here: http://s181.photobucket.com/albums/x299/mpsd18/?start=all

:cheers:

You have no idea how badly I want those ize bottoms lol.

It bodies are pretty cool looking, I was tempted to buy one a few weeks back from someone on here but I got a ule body instead.

[mpsd]

You have no idea how badly I want those ize bottoms lol.

That mask is one of my favorites! I've got a pair of SPD cash money soft years and just got a brand new cash money strap for it!

[Walking Stick]

Excellent pics mpsd! The color really shows the detail.