26 bps on an e-mag

[Okeebob]

If an e-mag can fire 25+ bps what do I chang in the circut board to make it do it?

[MAGS own YOU]

Its capable of firing 26 bps with no shootdown. The board wont let you go that high.

[BigFat]

If I am not mistaken(which I very well may be), the valve recharges can recharge at 26 BPS but the marker can only cycle 20 BPS. So the marker can shoot 20BPS, and it can never have shootdown.

[Army]

The ReTro Valve recharges at 26 SHOTS per second, balls won't feed that fast......yet

The Emag is set on the board at 13BPS tops (industry standard), however, in hybrid mode you can reach 16+ BPS easily.

There is nothing you can do to the board to increase the fire rate, there is nothing in the programming to alter:cool:

[a_malfunction]

Army, isnt it 16bps?

[Army]

? Industry agreed to 13BPS for safety and logical reasons.

If you have the Emag in "E" and/or Hybrid mode, the gun will display 16BPS when set for single shot (but you can bounce the trigger faster than that with the tank input set just right). 3 and 6 will only go to 13BPS in "E" only mode.

[Miscue]

Max BPS:

Semi - 16 bps
Burst modes - 9 bps

[Butterfingers]

I think somthing went awry with the industry standard. When AGD saw other maufacturers not standardizing they went 16 BPS. Correct me if I am wrong.

[splat11756]

donggie had a custom board made that can fire 26 bps in full auto. you can probly get one from him. find him in the dealer forum.

[WesternRT]

what feeder system are u going to get that will feed 26 bps?? warp tops out at what, 20? on top of that u cant get a hopper that will feed into a warp that fast.

[BlackVCG]

They're rated at 20bps w/o shootdown. Basicaly due to the added weight to the sear from the solenoid plunger.

It's 16bps for E-Mode and 9bps for burst modes.

In E-Mode you can go NO higher than 16bps, but in Hybrid mode you can fire it both with the electronics and manually, so techincally you can put it over 16bps, but you have the chance of short stroking.