pneumatic frame with AGD flatline reg

[Atension]

I was thinking about picking up a pneumatic chimera frame but after looking at verious ones, it looks like the LPR screws directly into the bottem line ASA in the grip. I run a 4500 AGD flatline reg and I was wondering is there a way to use my reg and the pneumatic chimera trigger frame?

[xero28]

You don't necessarily have to run the LPR off of the ASA. This is a photo of one of my old guns. The vert asa had 3 holes drilled/tapped and the rail was ULE'd out to run the air hoses through it and down into the grip frame. I've also used a hand drill before to mill out a groove in a standard AM/MM rail for the air line.

http://img693.imageshack.us/img693/2251/4forweb.jpg

[redlaser666]

If you run the flatline output straight in to the valve you can get a T fitting and screw the lpr rigt on the side of the valve.

[cyberave68]

You can put the LPR just about anywhere you want it, as long as it is monted on a stable platform. You cant see it to well in this pic but the LPR is mounted to the drop. I left all the extra air line coiled up just so i could set it all before cutting the ectras off. And like xero28 posted you can set it up on the front ASA fairly easy as well. I have more pics if you interested...

http://i104.photobucket.com/albums/m176/Cyberave68/Pneumag%20builds/DSC01922.jpg

Here is another shot but of a differnt gun...

http://i104.photobucket.com/albums/m176/Cyberave68/Pneumag%20builds/DROPMOUNT.jpg

[Atension]

Thanks guys looks like I have a lot of options. I appreciate the pictures.

[theGOLDENchild]

Thanks guys looks like I have a lot of options. I appreciate the pictures.

You could even remove you lp gauge from the flatline and install your lpr for the pneumatics in its place.