View Full Version : alpha logic rail and frame = double fire?
djinnform
03-20-2011, 11:32 PM
my alpha logic rail and logic frame are making my e mag valve with level 7 double fire,-- ever heard of this?
how can i fix double-fire, due to the rail and or frame?
double-fire = shoots at pull and release
is the sear showing any wear?
Spider-TW
03-21-2011, 11:10 AM
If it is a stock e-mag valve (but not an e-mag), try installing a stock RT on/off pin (.750").
Your rail may be a little thick for the short e-mag pin.
Make sure your rail is straight and your body is straight. Warped rails and bodies can lift the valve up and let the on/off open before the sear catches also.
djinnform
03-22-2011, 02:37 PM
thank you both, yes it is an old sear, let me try both these fixes and report back
TwilightG
03-22-2011, 02:43 PM
rail bushing?
Spider-TW
03-22-2011, 08:41 PM
rail bushing?
that too
djinnform
03-31-2011, 06:27 PM
what could be wrong with the rail bushing?
just make sure you have a rail bushing
TwilightG
04-01-2011, 07:35 AM
what could be wrong with the rail bushing?
just making sure you had one in there and that it's fitting between the rail and frame
if the bushing wasn't there or did not fit correctly, you'd have valve alignment issues
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.