PDA

View Full Version : Does anyone want one


hill160881
03-22-2011, 02:26 PM
I am thinking of having 5 or 6 of the lower EP block that i used in my Minigun mag build made.

If more than 5 want one i would like to know before hand.

I dont know on the price yet but i will know soon. The ram and noid will be optional.

Here is what it will look like, only better, because a real machinist will be making them.
http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/100_0899.jpg

And this is what it was used on, and can be used to make what ever you want :D
http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/100_0987-1.jpg
mpsd
03-22-2011, 04:27 PM
I'd be interested but need to see the price with and without internals. I'm currently unemployed so I can't say I'm 100% into this but I'm definatelly interested.

One question:

- I see you milled a channel for the LPR to into the actuator but does this part also have where to mount the LPR and ASA? Could you post some more detailed pics of the front end?

Thanks.
koleah
03-22-2011, 09:56 PM
That would probably work perfect for the forearm mounted mag with glove mounted electronics that I've always wanted to build :ninja:


Price.............?

Edit: My inspiration:
http://media.photobucket.com/image/batman+gloves+azrael+/cumbojumbo/kids_gloves_are_off.jpg
mpsd
03-22-2011, 10:03 PM
That would probably work perfect for the forearm mounted mag with glove mounted electronics that I've always wanted to build :ninja:


Price.............?

That would also be wonderfull for a bullpup Mag.
koleah
03-22-2011, 10:21 PM
That would also be wonderfull for a bullpup Mag.

A bullpup Mag with the body upside down so it can be fed from underneath!




Or was I not supposed to mention that part?
mpsd
03-22-2011, 10:31 PM
A bullpup Mag with the body upside down so it can be fed from underneath!




Or was I not supposed to mention that part?

You're taking my idea LOL

And what would it be fed of? A Q-Loader or a Warp Feed inside the stock, under the body?
hill160881
03-22-2011, 10:34 PM
A bullpup Mag with the body upside down so it can be fed from underneath!




Or was I not supposed to mention that part?

Thats the point. Whatever you can think of. I am not going to make any money at this so the price will be direct cost plus shipping. I will let everyone know as soon as i get it worked out. Maybe tomorrow.
koleah
03-23-2011, 12:12 AM
You're taking my idea LOL

And what would it be fed of? A Q-Loader or a Warp Feed inside the stock, under the body?

Nah. One of those new box mags that uses the Halo guts. No point wasting space with a loader and a Warp, just use a box mag.
mpsd
03-23-2011, 07:23 AM
Nah. One of those new box mags that uses the Halo guts. No point wasting space with a loader and a Warp, just use a box mag.

Truth. RAP4 sells it ready to use outside the box.
sjrtk
03-23-2011, 06:02 PM
I'll take one!!! I am interested Let me know when you have a price.
hill160881
03-23-2011, 07:32 PM
Sent off the ruff sketch today so i may know something about ruff price later.

Here is the sketch. Don't laugh, I'm not a great draftsman.
http://i971.photobucket.com/albums/ae195/hill160881/Temp/100_1131.jpg
zondo
03-23-2011, 07:39 PM
A bullpup Mag with the body upside down so it can be fed from underneath!




Or was I not supposed to mention that part?

:cheers:
hill160881
03-23-2011, 07:57 PM
I'd be interested but need to see the price with and without internals. I'm currently unemployed so I can't say I'm 100% into this but I'm definatelly interested.

One question:

- I see you milled a channel for the LPR to into the actuator but does this part also have where to mount the LPR and ASA? Could you post some more detailed pics of the front end?

Thanks.

The LPR bolts where ever you want. So no there is not a spot for the lpr in this piece, sorry. It would be to complex. I used a remote line adaptor to screw into the vert asa, and used a 90 degree 1/8 npt fitting into the LPR.
mpsd
03-24-2011, 08:34 AM
Thanks for the info Hill. I just remembered that this part is mounted in place of the frame but still leaves space for a regular vertical ASA.
hill160881
03-25-2011, 07:08 PM
It looks like the price will be around $50 without ram and $65 with one.

As for the Noid,,,,,,,,well they come from Japan so those mite take a while. Or just use a Mac 33, although it will not fit in the block with the ram like the smc will.
SSP-SheiK
03-26-2011, 04:46 PM
interested in a couple... maybe a few once i get some plans drawn up... ;)
hill160881
03-29-2011, 09:19 AM
It looks like the price is staying the same. The first test run will be started soon, maybe next week.
Imasho
03-29-2011, 12:55 PM
I'll take 1
hill160881
03-29-2011, 10:24 PM
They will be cut next week. :D
hill160881
03-29-2011, 11:15 PM
I just got this prelimaniary from Luke's Customs. It is a better drawing than mine :hail:
http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/HillsEPBlock.jpg
hill160881
04-18-2011, 04:32 PM
The first 6 are in. I will be posting a sales thread this evening so PM me If you have posted in this thread and let me know if you are interested.

Here is a pic. Hell of a job Luke's Customs! :cheers:
http://i971.photobucket.com/albums/ae195/hill160881/For%20Sale/PICT1448.jpg