Best loader for a warp feed?

[Fatalis]

Post up what are the best loaders for the warpfeed.

Fits best
Low profile
Feeds without issues

Let's hear it.

[Ando]

Any loader will work. If you have the 12v mod. a force feed type one will work best.

[pinkanese]

I have always been a fan of Ricochet hoppers on warps. The Apache is fast enough and mine has never given me issues.

[BigEvil]

The Prophecy is nice on the warp. The 240 nose sits nice on your wrist.

[Little_Ho]

i used an EGG on it worked very well......and its a low profile too....

[93klauss]

I have always been a fan of Ricochet hoppers on warps. The Apache is fast enough and mine has never given me issues.


I also use a ricochet with my warp. Works great and you can pick one up pretty cheap.

[Fatalis]

Easy to do the 12v mod yourself?

[robander3]

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=LM7812ACT-ND
buy one of these, then look at a picture of one and make one using wires and shrink tube.

Not to difficult...

[Ando]

They sell them at radio shack

[kevdupuis]

I stuck a Halo B on my warp in 04 and it's been there since.

[Fatalis]

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=LM7812ACT-ND
buy one of these, then look at a picture of one and make one using wires and shrink tube.

Not to difficult...


Anyone have a pic of the setup?

Thanks

[GoatBoy]

Heh... anyone ever try a proto primo on there?

[Fatalis]

I just really need a pic of the harness in 12V setup. :cheers:

[DoubleDutch]

Heh... anyone ever try a proto primo on there?

I tried it, didn't work. Not enough vibration, or no blowback, I guess. It would jam after 10 balls or so. I went back to my trusty revvy.

[Zone Drifter]

I have used a ricochet and 12v revvy, both worked fine but after I modified the revvy (melted a pocket for the feed tube) it stayed on there. It was more comfortable and just seemed to fit right, never had a misfeed issue.

[OneSelfLost]

I use an eVLution II on mine, I like it because the feed tube is at the front of the hopper and I don't have to maneuver the hose around it.

[leloup]

I use a revvy, modded so that the tube runs through the hopper. Super tight.

[bound for glory]

i always used a revvie. worked like a charm.

[AutoFiend]

the eggy was meant for the warp feed. nice low profile and you dont have to turn your warp or hopper at weird angles

[zondo]

Yep, dredging up this thread... :)

Anyone have a Magna mounted on a warp? Seems like it would fit nicely like the Eggy with the feedneck far forward.

[93klauss]

I just really need a pic of the harness in 12V setup. :cheers:

If you search for the 12v warp mod, someone gave me a basic wire diagram for it, should still be on the thread. But people have suggested a capicator if using the vib sensor.

[JLuke]

Rotor :D

[Chris]

My favorite has always been the 12V revvy molded to fit around the wrap tube.

Tight profile, and never had any issues keeping up.

[mpsd]

Ricochet, Egg and the Magna are all good options.

[bulldog_tt]

I use a Vlow Jr or Ricochet.

[sjrtk]

I just rock my egg on the warp good and solid. Used to run a revy but the egg feels better.