View Full Version : Best loader for a warp feed?
Fatalis
07-12-2011, 12:32 AM
Post up what are the best loaders for the warpfeed.
Fits best
Low profile
Feeds without issues
Let's hear it.
Any loader will work. If you have the 12v mod. a force feed type one will work best.
pinkanese
07-12-2011, 02:53 AM
I have always been a fan of Ricochet hoppers on warps. The Apache is fast enough and mine has never given me issues.
BigEvil
07-12-2011, 06:25 AM
The Prophecy is nice on the warp. The 240 nose sits nice on your wrist.
Little_Ho
07-12-2011, 07:23 AM
i used an EGG on it worked very well......and its a low profile too....
93klauss
07-12-2011, 08:01 AM
I have always been a fan of Ricochet hoppers on warps. The Apache is fast enough and mine has never given me issues.
I also use a ricochet with my warp. Works great and you can pick one up pretty cheap.
Fatalis
07-12-2011, 08:23 AM
Easy to do the 12v mod yourself?
robander3
07-12-2011, 02:49 PM
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=LM7812ACT-ND
buy one of these, then look at a picture of one and make one using wires and shrink tube.
Not to difficult...
They sell them at radio shack
kevdupuis
07-12-2011, 03:38 PM
I stuck a Halo B on my warp in 04 and it's been there since.
Fatalis
07-12-2011, 06:09 PM
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=LM7812ACT-ND
buy one of these, then look at a picture of one and make one using wires and shrink tube.
Not to difficult...
Anyone have a pic of the setup?
Thanks
GoatBoy
07-12-2011, 08:24 PM
Heh... anyone ever try a proto primo on there?
Fatalis
07-12-2011, 08:27 PM
I just really need a pic of the harness in 12V setup. :cheers:
DoubleDutch
07-12-2011, 09:58 PM
Heh... anyone ever try a proto primo on there?
I tried it, didn't work. Not enough vibration, or no blowback, I guess. It would jam after 10 balls or so. I went back to my trusty revvy.
Zone Drifter
07-19-2011, 09:40 AM
I have used a ricochet and 12v revvy, both worked fine but after I modified the revvy (melted a pocket for the feed tube) it stayed on there. It was more comfortable and just seemed to fit right, never had a misfeed issue.
OneSelfLost
07-21-2011, 10:56 PM
I use an eVLution II on mine, I like it because the feed tube is at the front of the hopper and I don't have to maneuver the hose around it.
leloup
07-28-2011, 01:18 AM
I use a revvy, modded so that the tube runs through the hopper. Super tight.
bound for glory
07-30-2011, 04:16 PM
i always used a revvie. worked like a charm.
AutoFiend
08-09-2011, 05:18 AM
the eggy was meant for the warp feed. nice low profile and you dont have to turn your warp or hopper at weird angles
zondo
01-08-2012, 08:49 PM
Yep, dredging up this thread... :)
Anyone have a Magna mounted on a warp? Seems like it would fit nicely like the Eggy with the feedneck far forward.
93klauss
01-08-2012, 08:59 PM
I just really need a pic of the harness in 12V setup. :cheers:
If you search for the 12v warp mod, someone gave me a basic wire diagram for it, should still be on the thread. But people have suggested a capicator if using the vib sensor.
JLuke
01-08-2012, 09:17 PM
Rotor :D
Chris
01-08-2012, 09:20 PM
My favorite has always been the 12V revvy molded to fit around the wrap tube.
Tight profile, and never had any issues keeping up.
Ricochet, Egg and the Magna are all good options.
bulldog_tt
01-09-2012, 06:54 AM
I use a Vlow Jr or Ricochet.
sjrtk
01-09-2012, 08:56 AM
I just rock my egg on the warp good and solid. Used to run a revy but the egg feels better.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.