PDA

View Full Version : RT Pro Problem


WileyPB
08-23-2011, 05:36 PM
So I air up the gun and everything seems good... The trigger tightens and there are no leaks. The problem is when I pull the trigger nothing happens.. No dry fire or anything. Does anyone have an idea as to what the problem may be? If any other information is needed pls let me know. Thanks in Advance!
ScreamingShiek
08-23-2011, 05:51 PM
Loosen the rear thumbscrew.
WileyPB
08-23-2011, 05:58 PM
So i loosened it a bit and still ahd the same problem, then loosened it until there t was a leak. Could i be missing something?


Loosen the rear thumbscrew.
Ando
08-23-2011, 06:11 PM
First thing would be increasing the velocity... Screw in #29 a full turn CW. Keep going till it either vents out the back or bottoms out.

http://i283.photobucket.com/albums/kk300/jbonot/AGD%20Tech%20Support/xvalveexplodedff7.gif
WileyPB
08-23-2011, 06:26 PM
hmmm seems as though the velocity adjuster is stuck and wont turn CW or CCW.
WileyPB
08-23-2011, 06:32 PM
hmmm seems as though the velocity adjuster is stuck and wont turn CW or CCW.

Was just really tight, bottomed out then lowered velocity and it's shooting. Thanks, dont know why i didnt think about adjusting the velocity.