Tech Help For First Mag Project

[FLsurf715]

i just got my first mag. i wana so soup it up to back up my invert mini (maybe even replace it) =P
http://i61.photobucket.com/albums/h69/enjoiWGP/a1automag.jpg
http://i61.photobucket.com/albums/h69/enjoiWGP/KGrHqIOKp0E4lUynNboBOOzeyIw0_14.jpg
i want to know if this is a good base to start my project on, or should i sell and buy a new one?
i want:
double finger blade trigger
i understand they have adapters, i want to screw in a freak kit.
level 10 bolt
break beam anti chop eyes
most importantly, i want to be able to walk this trigger.
from what i understand through reading yall's postings, it can be done penumatically, or electro. and i hear that electro mags can even shoot when their batteries are dead.
i want ultimate accuracy! and a decent rate of fire, at least 10-12 bps.

here is the specs the previous owner wrote on the ebay posting when i won the auction:
1)Automag-Has wear/fade but fully functional, good recharge on this valve pretty fast all tuned.Body has scratches can use some wet sanding.

2)Modified benchmark frame to make it look slimer /New Dye Grips

3)New clear Bike grip and asa

4)4 macro fittings / with new macro lines

5)RT twistlock Barrel / shoots .689 balls good

6)Free elbow


I NEED A CHEAP WEBSITE TO BUY PARTS, HELP? ANYONE SELLING A MARKER THAT IS ALREADY BUILT LIKE I WANT?
FINALLY, WHAT WOULD THIS MARKER SELL FOR RIGHT NOW?
SO THANK YOU GUYS FOR ALL THE HELP!!

[crazyjoe12]

i cannot tell what valve that has in it but if your going to want a pnuemag your going to want an rt or x valve and it is cheaper to buy the parts and build exactly what you want instead of buying a base gun and upgrading it; then you end up with a bunch of spare parts and more than likely a whole new marker in the end, which isnt always bad, then you can have two mags :dance: look on the forums here and the other ones to find the parts you are looking for, used is always going to be cheaper and mag parts are very dependable and last a very long time so that wont be a problem when buying used. also with the level 10 you dont really need eyes, this bolt is amazing and hasnt let me down, even when i had my pnuemag the level 10 was all i needed, didnt feel a need for eyes. if you have any other questions just ask id be happy to help a new mag guy out!


p.s. if your anything like me your mag is going to become ur gun of choice really fast :cheers:

[crazyjoe12]

you could probably get somewhere in the ball park of $100 for it, it looks pretty rough though.

[Tropical Life]

This was the automag I used to do my underwater automag video, while cleaning her out. My advise is how much you willing to spend?

Your current gun if you part:
1)body-15.00
2)barrel-15.00
3)valve-25.00 68 automag
4)asa adapter-20.00 brand new
5)bike grip-25.00 brand new
6)macro-line fittings $3 each x 4=$12.00
7)stock rail- 20.00/with sear and pin, barrel pin
8)grip-15.00 with new dye stickies
9)drop forward/no on/off-10.00

total-$157.00
I sold her for a quick sale, since I have way to many markers. I took a big lost due to ebay/PP fees.

If you were to upgrade your current basic automag marker as-is, not changing body and rail (if not just get new marker imo cause you wont be keeping nothing original and replacing whole gun, but then again this could be lil-by lil build for you, off a complete marker) Your looking at:
1)New grip frame- Intelli double trigger-$80-$100
pnue'd grip frames depending on frame brand-$180-$350.00
2)X-Valve-$170-$200
3)Doc's adapter to fit autococker threads-$25.00
4)Different asa up to you if you dont like the bottom bottle.
5)Paint or polish the rest of marker
6)if you decide rail and body-most brands will sell for $200-$400

If you wanna buy complete markers.
1)pnue'd ULE markers with xvalves-$550-$900.00
2)basic ULE mags with xvalves-$350.$550.00
3)EMAGS with xvlaves-$600-$900 depending on body/rail combo
4)XMAGS with xvalves-$800-$1200

Good luck on your automag journey...

[FLsurf715]

do you mean you were the one that a bought this marker from on e-bay??
first off thank you for such a detailed response. i really appreciate that. I think i will re-sell her and buy one off this website. know anyone selling one like i want?


This was the automag I used to do my underwater automag video, while cleaning her out. My advise is how much you willing to spend?

Your current gun if you part:
1)body-15.00
2)barrel-15.00
3)valve-25.00 68 automag
4)asa adapter-20.00 brand new
5)bike grip-25.00 brand new
6)macro-line fittings $3 each x 4=$12.00
7)stock rail- 20.00/with sear and pin, barrel pin
8)grip-15.00 with new dye stickies
9)drop forward/no on/off-10.00

total-$157.00
I sold her for a quick sale, since I have way to many markers. I took a big lost due to ebay/PP fees.

If you were to upgrade your current basic automag marker as-is, not changing body and rail (if not just get new marker imo cause you wont be keeping nothing original and replacing whole gun, but then again this could be lil-by lil build for you, off a complete marker) Your looking at:
1)New grip frame- Intelli double trigger-$80-$100
pnue'd grip frames depending on frame brand-$180-$350.00
2)X-Valve-$170-$200
3)Doc's adapter to fit autococker threads-$25.00
4)Different asa up to you if you dont like the bottom bottle.
5)Paint or polish the rest of marker
6)if you decide rail and body-most brands will sell for $200-$400

If you wanna buy complete markers.
1)pnue'd ULE markers with xvalves-$550-$900.00
2)basic ULE mags with xvalves-$350.$550.00
3)EMAGS with xvlaves-$600-$900 depending on body/rail combo
4)XMAGS with xvalves-$800-$1200

Good luck on your automag journey...

[Tropical Life]

I was the seller on ebay...

Below are some current deals on here, you can check out the classified, buy/sell/ trade section for markers or the parts section and build yours lil by lil.

http://www.automags.org/forums/showthread.php?t=258071
pnue'd mag $700.00


http://www.automags.org/forums/showthread.php?t=258031
another tac-body mag $550


http://www.automags.org/forums/showthread.php?t=258264
ule body mags $350.00

You can also contact tunaman for custom ule mags or check out the www.agd.com website.

[need4reebs]

pm Stimpysan...he has everything your looking for...but its gonna go fast! good luck...and be careful Mags are Addicting!!!! :D

[FLsurf715]

pm Stimpysan...he has everything your looking for...but its gonna go fast! good luck...and be careful Mags are Addicting!!!! :D

i have an invert mini, that mag i posted pics of, and a tippmann a5 id be willing to offer some or all of these in a trade, plus possible cash, for a nice pneumag or emag! how can i get ahold of stimpysan? [new to the site guys]

[FLsurf715]

I was the seller on ebay...

Below are some current deals on here, you can check out the classified, buy/sell/ trade section for markers or the parts section and build yours lil by lil.

http://www.automags.org/forums/showthread.php?t=258071
pnue'd mag $700.00


http://www.automags.org/forums/showthread.php?t=258031
another tac-body mag $550


http://www.automags.org/forums/showthread.php?t=258264
ule body mags $350.00

You can also contact tunaman for custom ule mags or check out the www.agd.com website.


btw, thank u for quick shipping and good service! nice to run into you on here! =]

[need4reebs]

you can just send him a PM here on AO...oh yeah man Welcome to AutoMags.org!!! there is so much to be learned here and a lot of kool people to deal with!!! im Ben if you ever have any questions feel free to ask and ill do my best to help ya find your answer...welcome to the Addiction :cheers: