Fresh from the annodisers

[renie]

received my parts back today hopefully get it built tomorrow still waiting on the board, hopefully have it shooting by the end of the week :)

http://i16.photobucket.com/albums/b9/renie666/2012-02-20180742.jpg

[RST]

Uh, this will be a beauty :D

Is there a market for Etek/Etek2 Frames (yep, your one is an Ego5, I see)? I have 2 or 3 new ones laying around.

[renie]

Uh, this will be a beauty :D

Is there a market for Etek/Etek2 Frames (yep, your one is an Ego5, I see)? I have 2 or 3 new ones laying around.

Yeah thats an 05 frame i t-slotted the bottom so it take the 07 oops :)

yeah i used one in my first mag build but i preffer the LCD screen :)

im sure someone would buy them, maybe even me :)

[Chrome]

Neat rail. Who made it? Did you cut it from an existing rail (or slug) or is it all new?

[renie]

Neat rail. Who made it? Did you cut it from an existing rail (or slug) or is it all new?

Made by me from billet :)

http://i16.photobucket.com/albums/b9/renie666/2012-01-06153601.jpg

i lightened this one befor anno :)

http://i16.photobucket.com/albums/b9/renie666/2012-02-21101704.jpg

[GEE TEE]

Nice work again mate :hail:

[renie]

Nice work again mate :hail:


Cheers GT ill be over your way again this week if your about ill pop over and bringit with me

[renie]

almost complete

http://i16.photobucket.com/albums/b9/renie666/2012-02-21174922.jpg

[renie]

http://i16.photobucket.com/albums/b9/renie666/2012-02-21192638.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-02-21192707.jpg

[athomas]

Nice job.

[Rudz]

Palmers can mod there regs so that they output lp out of the top and hp out of the side port, perfect for these type of set ups, and you don't have to run 2 hoses off the asa

[OPBN]

Love the marker... hate the grips.

[renie]

Love the marker... hate the grips.


yeah i know there all i had im awaiting delivery of some nicer ones :)

Trying to get palmers stuff in the uk is like trying to get rocking horse sh*t
im in the process of making my own, but so tied up with stuff at the mo.

[lasrsktr]

Here is my old pneumag/egomag setup:

Palmers Fatty
http://i166.photobucket.com/albums/u110/lasrsktr/Paintball/IMG_6717Large.jpg

Also had a Palmers Stab Dual tapped for HP input/outputs.
http://i166.photobucket.com/albums/u110/lasrsktr/Paintball/IMG_0646.jpg

The palmers fatty was rock solid and would suggest that to anyone looking.


I love the way you used the EGO vert ASA.

~Steven

[Ando]

Hat off to you sir :cheers:

[need4reebs]

HO LEE CHIT! between you and HILL i dont know what to save my money for!!! yall got some skills...haha...very nice werk!!! :cheers:

[renie]

well it shoots,but ive runout of paint :(

http://www.youtube.com/watch?v=EKXhXuZnqGo

[Loguzzzzzz]

Here is my old pneumag/egomag setup:

Palmers Fatty
http://i166.photobucket.com/albums/u110/lasrsktr/Paintball/IMG_6717Large.jpg

Also had a Palmers Stab Dual tapped for HP input/outputs.
http://i166.photobucket.com/albums/u110/lasrsktr/Paintball/IMG_0646.jpg

The palmers fatty was rock solid and would suggest that to anyone looking.


I love the way you used the EGO vert ASA.

~Steven
Those look awful familiar!
;) :D

[Spider-TW]

Nice renie!

If you take pictures again, how about one from the front or back? That looks interesting the way you have the sides flushed up.

What is the story with the two screws in the back of the frame? Just separate frame and valve screws?

[renie]

Nice renie!

If you take pictures again, how about one from the front or back? That looks interesting the way you have the sides flushed up.

What is the story with the two screws in the back of the frame? Just separate frame and valve screws?


will do mate :) yes the back one is just a frame screw it justs tightens it up nice :)

[renie]

http://i16.photobucket.com/albums/b9/renie666/2012-02-29203814.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-02-29203826.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-02-29203847.jpg

[renie]

internal pics

http://i16.photobucket.com/albums/b9/renie666/2012-02-29164746.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-02-29164905.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-02-29164709.jpg

[GEE TEE]

Glad you managed to get it shooting ok with a bit of fiddling last night

Hopefully we'll be able to fine tune it on Sunday?

GT

[hill160881]

I would guess the trouble is with the location of the ram. As high as it is hitting the sear arm it is probably making it inconsistant. Thus the need for the spring on the sear arm and it may cause reset issues down the road. If not that is a good idea for pneumags of all sorts.

[renie]

the problem i was getting hill was it was skipping a shot or 2 on high rof but imnot sure if that was my bottle again not recharging the valve quick enough?? ive put the return spring in just in case but will try on another bottle on sunday :)

on another thought it could be my dwell setting may be a bit high, ill haveto check what the virtue board is set at

[hill160881]

Set the dwell at 15-18ms. I can run mine as low as 11 ms but that will cause excessive sear where. You want the on off engaged keeping the sear down and out of the way of the bolt untill the bolt has finished its backwards travel to prevent it from riding on the sear.

[renie]

how many shims in my ult do u think?

[hill160881]

I don't use them so I dont know. The ult is a pain in the arss. Haha.

[renie]

ha ha, its all i got :) gonna try new bottle 1st then add a couple of shims

[renie]

:bounce: all sorted now :) 3 shims in the Ult dwell at 9ms, just run out of air so no Vid untll later, but man i wouldn't want to be on the receiving end of this badboy :)

[hill160881]

As soon as I am at a computer I will explain pin length, dwell, and how they effect efficiency, timing, and wear and tear on the bolt/sear. :cheers:

[OPBN]

:bounce: all sorted now :) 3 shims in the Ult dwell at 9ms, just run out of air so no Vid untll later, but man i wouldn't want to be on the receiving end of this badboy :)
So how long before we see it in the BST? :rofl:

[renie]

So how long before we see it in the BST? :rofl:


I can't help it i enjoy the build :) cant wait to rock out with it on sunday

Hill: the dwell has to be low due to the position of the rammer i adjusted it .5 at a time till it sweet spotted :) exessive wear's not a major problem as my sears are slightly softer than agd originals and i got 50;)

[eelz]

:bounce: all sorted now :) 3 shims in the Ult dwell at 9ms, just run out of air so no Vid untll later, but man i wouldn't want to be on the receiving end of this badboy :)


lol..I wasn't far off then with my 4 shims and @ 10m/s in my txt mate, glad its sorted Ren. :headbang:

Can't wait for my xmag revival now.. :cool:

[renie]

http://www.youtube.com/watch?v=ZZY5nHY1C68

[eelz]

thats mint. :clap:

[renie]

a few more pics :)

http://i16.photobucket.com/albums/b9/renie666/2012-03-04200155.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-03-04200229.jpg
http://i16.photobucket.com/albums/b9/renie666/2012-03-04200254.jpg

[dahoeb]

oh beautiful, that is a great look.