Bolt stick or spring?

[93klauss]

Level ten bolt

Had to change carrier oring and oiled. Airs up and shoots fine for a couple of shoots. every now and then the bolt will not reset after shooting.,

If I hit the back of the valve with my hand it vents air then resets and I can shoot again.

Tried the next carrier larger and leak down the barrel. Went back to smaller carrier and holds air. shoots after a couple os shoots, then it wont till smack the back again.

Wondering if that is the norm for a worn spring? Or do i have a different problem?

Thx
:confused:

[Geronimo7]

It's been awhile but sounds like the bolt is sticking. Try the next smallest carrier and fire a few shots to see if it won't seal.

[93klauss]

Seals and holds air the bolt does not reset after firing.

[Ando]

do you have your rail bushing installed?

A worn spring will do this too.

[93klauss]

No rail bushing. Guessing it is my spring, being the second summer with it. Thanks for the help

[athomas]

When you checked your carrier size, did you do it without the shims installed? The shims could cause false leaking which would lead you to install a carrier that was too tight.

[Ando]

Get a rail bushing installed and follow what AThomas said. Too many shims will give you a false positive.

[athomas]

I missed the missing rail bushing info. You definitely need that for it to work properly.