max flo regulator

[keiko_819]

anyone got a exploded view or know the best way to take it apart, my on off lever doesnt stop air flow so im just trying to get it fixed...thanks :headbang:

[NU_METAL]

Here's the link ;) enjoy

http://www.zdspb.com/media/manuals/maxflo-mfi.JPG

In the future i would ask TECH questions in the tech forum
the one that's rite below this one on the forum home page

Heres the home page for ZDS paintball
http://www.zdspb.com/tech/misc/manuals.html

[keiko_819]

thanks NU_METAL... :cheers:

[Ando]

anyone got a exploded view or know the best way to take it apart, my on off lever doesnt stop air flow so im just trying to get it fixed...thanks :headbang:
Once you replace the oring in there (very tiny one in the cavity of the on/off). When you go to turn on/off the air, you need to bring the pressure down as far as it can go. That oring will go bad again if you don't bring the pressure below 400-600 psi. Turning it off at the 1200-1500 psi that is't capable of going to will ruin it again and you'll be back in the same boat. Smoothing out the hole on the on/off will help a lot but it's only a bandaid fix and the oring will eventually blow again.

Edit: Oring 5 is the one you need to replace.