AGD/AO Fundraiser Plaque for Sale, Limited Time Offer

[luke]

Donated $100 on 9-20-12 for 5 plaques sold.

This signature plaque is a one time offer and will never be reproduced in this exact configuration.
These are machined from ¼” 6061 aluminum plate and measure 6 x 8-11/16 inches.
These are machined as “wall hangers” but could have various uses.
All plates come with a raw finish.
All come with Tom Ks autograph.

First 3 sold/paid for will be machined and shipped ASAP, the mill is set up ready to go.
The remaining units will be on hold until we have a final count on how many will be made.
Once we have a total I'll order materials and knock them out.

Shipping weight is approx. 1.5 lbs (Approx $10) and will ship USPS Priority only.
Purchase price is $93 (Shipping is included in that total)
No limits on purchase amounts.
I will donate $20 from every plaque sold up to what is necessary to reach our goal.

TotShadowCompany’s AO name is included because he donated the graphics to help get the project started.




If anyone is interested in purchasing the prototype I will sell it for $70 (shipped) $20 will go to the AO fund raiser.---SOLD---



To make a purchase please send me a private message. Thanks.


Please let me know up front if your order will be shipped internationally so we can sort out the details before you make you payment, thanks.

Here's the final art work.

http://i550.photobucket.com/albums/ii405/mtumbleson/AGDPlaqueFinal_zps379e7692.jpg


:shooting:

Member Name --- No. of Plaques Paid For --- Ship Dates-----Donation Made

Bunny---------------------1 Ptototype-----------9/19/12-------$20 on 9-20-12
knownothingmags--------2___________________________$40 on 9-20-12
Imasho--------------------1 (ships to Canada)--9-28-12-------$20 on 9-20-12
RST------------------------1 (ships to Germany)___________$20 on 9-20-12

[Bunny]

i'll take it just so KNM doesn't get it. :D / serious offer btw... lol

[shooter311]

I'l take the prototype!!!

[RST]

I will take one :)

[luke]

Bunny has firsts dibs on the prototype..

[shooter311]

i'll take it just so KNM doesn't get it. :D / serious offer btw... lol

My bad, i wassn't trying to snake the prototype from you. For some reason it didn't register you were talking about the prototpe

[rukh013]

interested

[luke]

Gives you second dibbs though. :cool:

[Bunny]

shooter311: It's all good!! I sent a PM as well to make sure he saw my offer.

I went ahead and sent over the $$$. There are still plenty of awesome plaques to go around though!!! :cheers:

[knownothingmags]

i'll take it just so KNM doesn't get it. :D / serious offer btw... lol
that not fare , had class all day just got back.
dick

[knownothingmags]

ill take 2
whats your paypal again?

just so i know i am part of the first three.

[Bunny]

lol. just giving you a hard time!! It's not like im going to mill "prototype" on it..... :ninja:

[knownothingmags]

lol. just giving you a hard time!! It's not like im going to mill "prototype" on it..... :ninja:
:D i was. lol

this is cool been wanting one of these for years

[luke]

I'll try and get the first 3 cut tomorrow... :cool:

[Imasho]

If # 3 isnt taken I'll take it.


Paypal maneys sent
Thanks
Dave/Imasho

[Ando]

When you make the license plate version. Count me in :cheers:

[RST]

sent

[renie]

Nice work Luke :)

[luke]

If # 3 isnt taken I'll take it.


Paypal maneys sent
Thanks
Dave/Imasho

I ordered some boxes from the Post Office that I hope will bring the cost down below $25 to ship this to Canada. The only problem is I have to wait to ship your order until they get here, probably a week.

[luke]

sent

I ordered some boxes from the Post Office that I hope will bring the cost down to Ship to Germany. However I'm uncertain of the actual shipping cost right now. The "extra" should cover the fee but there may be extra shipping costs. I'll worry about it later.

[BenoitOWN]

How about first class mail to canada?
Large padded enveloppe ...
Would fit within the 10$ budget.

[luke]

How about first class mail to canada?
Large padded enveloppe ...
Would fit within the 10$ budget.

I only ship Priority for a number of reasons.

But I found some Priority boxes I've never seen before that will help with the price. They are listed as flat rate but dont say so on the box so I dont know if it was a misprint or something. I'm going to double check with the post office when they arrive. If they are legit they will be 1/2 the going rate to Canada for stuff over a pound that wont fit the small flat rate boxes.

[RST]

I ordered some boxes from the Post Office that I hope will bring the cost down to Ship to Germany. However I'm uncertain of the actual shipping cost right now. The "extra" should cover the fee but there may be extra shipping costs. I'll worry about it later.

Thank you.

[TOTShadowCompany]

Medium flat rate priority box ship'd international is $47.95. Ship'd a marker to France. Canada is the same. Go figure???

[luke]

I'm cutting the new version now, pictures comming soon. :bounce: :bounce:

[BenoitOWN]

Allright once you know the final price for canada lmk :)

[Imasho]

I only ship Priority for a number of reasons.

But I found some Priority boxes I've never seen before that will help with the price. They are listed as flat rate but dont say so on the box so I dont know if it was a misprint or something. I'm going to double check with the post office when they arrive. If they are legit they will be 1/2 the going rate to Canada for stuff over a pound that wont fit the small flat rate boxes.

Let me know when you find out how much more I owe for shipping.

Thanks
Dave/Imasho

[luke]

$3K goal was reached, I'll get materials ordered and machine the last plaque asap. :cool:

[knownothingmags]

no need to put another picture up,
but i got my 2 plaques, pictures really dont do them justice.

freakin amazing
:cheers:

thankyou again.

[luke]

Thanks man, I wish I could have sold more as I have a bunch of time invested in these, oh well... :)

[RST]

Can't wait! :cool:

[luke]

Can't wait! :cool:

Just finished your plaque, I'll ship it out tomorrow.

[Imasho]

no need to put another picture up,
but i got my 2 plaques, pictures really dont do them justice.

freakin amazing
:cheers:

thankyou again.

Agreed! Very nice.
Beautiful work!

[RST]

Just finished your plaque, I'll ship it out tomorrow.


Got it today! :cool:


How many plaques have been made?

[luke]

5 Total :rolleyes:

[RST]

Let's see how this comes out 24K gold plated :cool:

[knownothingmags]

Let's see how this comes out 24K gold plated :cool:
24k gold plated?

did you come across a gold mine?

or is it really not that expensive to goldplate stuff?

[RST]

Well I don't know the costs for the plating but after thinking about witch ano would be the best for it I came to the decision that gold or chrome plated would be much nicer than ano. Gold would be porn and so it shall happen! :D

[going_home]

Well I don't know the costs for the plating but after thinking about witch ano would be the best for it I came to the decision that gold or chrome plated would be much nicer than ano. Gold would be porn and so it shall happen! :D

$1709.80 per ounce 10/29/12.

Good luck with that.

At that price it will stay on the front bumper for about 19 seconds or until you get out of sight,

whichever is first.


:ninja:

[knownothingmags]

how many ounce do you guys think roughly, these plaques would require?

[wetwrks]

how many ounce do you guys think roughly, these plaques would require?

Not even an ounce. Plating is extremely thin and you would be looking in grams not ounces.

[knownothingmags]

Not even an ounce. Plating is extremely thin and you would be looking in grams not ounces.
how many grams for two plaques?

and yes i stealing the plating idea:D

[luke]

Take them to your local jewelry shop and get a quote, that would probably be easiest. I would guess in the range of $250 each.

This exact plaque will never be made again. :cool:

[knownothingmags]

Take them to your local jewelry shop and get a quote, that would probably be easiest. I would guess in the range of $250 each.

This exact plaque will never be made again. :cool:

that sounds pretty reasonable.

may have to do this, ill have to make a plexi case or something for them when this gets done.

[RST]

and yes i stealing the plating idea:D



:D

[dre1919]

Hey! I recognize those graphics (because I made them for ToT). :)
Way to go Luke, those look awesome!