questions :D

[knownothingmags]

*what is the thread size for the bolts in the warp feed?
*what is the thread size of the screw that holds the emag board in?
*how long are the screws that hold the emag board in?

*what size are the saftey assymbly balls?
<span style="color:#FF0000"><b>saftey balls are 3/32"</b></span style="color:#80BFFF">

*what are the specs for the springs for the safteys in aluminum frames?
-whats the length?
-how much space between the coils?
-whats the outer diameter?
-whats the diameter of the wire the springs are made from?
<span style="color:#FF0000"><b>Short Spring:
7 Coils+1 (Closed End, Not Ground)
6 Spaces
OAL=0.240"
Radius= 0.0425"
Material Diameter= 0.015"
Space Between Coils= 0.0225""</b></span style="color:#80BFFF">

*what are the specs for the springs for the selector switches on emag frames?
-whats the length?
-how much space between the coils?
-whats the outer diameter?
-whats the diameter of the wire the springs are made from?
<span style="color:#FF0000"><b>Long Spring:
8 Coils+1 (Closed End, Not Ground)
7 Spaces
OAL= 0.330"
Radius= 0.04675"
Material Diameter= 0.015"
Space between coils= 0.03""</b></span style="color:#80BFFF">

*what size are the screws that go through the frame, rail then thread into the body(thread size and length?
<span style="color:#FF0000"><b>10-32 thread, 7/8 inch length</b></span style="color:#80BFFF">


*what is the size of the threading and lenght of the set screws that hold the saftey spring in on the frames?
<span style="color:#FF0000"><b>#4/40 no longer than 1/8"</b></span style="color:#80BFFF">

if you can answer please do.

more questions to come as i gather them.

thankyou for the help guys.
KNM.

EDIT: numbers please, i have enough automags to see the differencese in person :D just looking for real specs here.
thankyou.

[Ando]

The aluminum safety is the same as the carbon fiber safety assy. I'm not sure about the Emag....I do know the spring is a little longer IIRC.

[knownothingmags]

no one else has any answers?

[correia3]

The front frame screw is 10-32 thread, 7/8 inch length...

[knownothingmags]

thankyou

[maniacmechanic]

for safety springs and ball's I've always cut up grease fittings , the balls are the same size , the spring will need trimmed to taste
I'm pretty sure the set screws are #4/40 no longer than 1/8"

[knownothingmags]

just, specs please,
ill test out the #4-40 1/8th

[luke]

The saftey balls are 3/32" in diameter (I measured my Intelli ball bearing) and I know where you can get a package of 100 for less than $5 (plus shipping)

[knownothingmags]

The saftey balls are 3/32" in diameter (I believe) and I know where you can get a package of 100 for less than $5 (plus shipping)
me too.

keep the spec comin please.

thankyou,
KNM.

[reckid1986]

sounds like you need a decent set of calipers. I can get you most of your measurements except the emag ones. My emag is currently with tuna. I have an extra set of 0-6" mitutoyo dial calipers if your interested.

[knownothingmags]

sounds like you need a decent set of calipers. I can get you most of your measurements except the emag ones. My emag is currently with tuna. I have an extra set of 0-6" mitutoyo dial calipers if your interested.
i have calipers,
springs are a little harder to get the info w/ calipers.

any more specs people are willing to give please throw them up.

thankyou,
Ryan M.

[luke]

i have calipers,
springs are a little harder to get the info w/ calipers.

any more specs people are willing to give please throw them up.

thankyou,
Ryan M.

I don’t think you will get any “inside information” on springs, so I will gladly measure them for you if you want to send them to me. No charge if we can ship them back to you with another order.

[knownothingmags]

I don’t think you will get any “inside information” on springs, so I will gladly measure them for you if you want to send them to me. No charge if we can ship them back to you with another order.
i will send them to you with these parts im sending in.

thankyou very much.

Ryan M.

[knownothingmags]

well never mind, just found out i lost everything tunaman just mailed me.

havin a bad day.

EDIT: lol just found them, in the box shipping out very soon.

[Bunny]

knownothingmags: you should invest in an automag inventory specialist :-) My girlfriend seems to keep a mental note of all the paintball equipment I own :D

[knownothingmags]

my wife doesnt like any of my hobbies. from what i have seen.

she is coming around alittle though.

[knownothingmags]

any more info?

[BTAutoMag]

i'll bring my caliper home tonight and take apart a safety for you... :cool:


ill pm you my pay pal addy, 20$ should do.... :p





j/k :rolleyes:





i'm poor :(







its a safety from a benchmark frame... that ok?

[knownothingmags]

i'll bring my caliper home tonight and take apart a safety for you... :cool:


ill pm you my pay pal addy, 20$ should do.... :p
j/k :rolleyes:
i'm poor :
its a safety from a benchmark frame... that ok?
no worries i think luke is doing it for me.

thankyou though.

[BTAutoMag]

you sure, its no sweat off my back :p

[luke]

Long Spring:
8 Coils+1 (Closed End, Not Ground)
7 Spaces
OAL= 0.330"
Radius= 0.04675"
Material Diameter= 0.015"
Space between coils= 0.03"

Short Spring:
7 Coils+1 (Closed End, Not Ground)
6 Spaces
OAL=0.240"
Radius= 0.0425
Material Diameter= 0.015"
Space Between Coils= 0.0225"

[knownothingmags]

thankyou again luke,
this will help with info.

ill update infor on first page tommorow for anyone waiting on it.

just to reidorate Tunaman, or the Airgundesigns online store shoule be your first stop.:)

thankyou,
KNM.

[knownothingmags]

updated

[knownothingmags]

new questions.

thanks.