***1st look** automag rt classic ule bodies, rt length rt front bodies

[Xmagterror]

As promised i finished the machining on the prototypes. Its amazing how much lighter my red smear rt is with the ULE body, X valve and ULE milling...It cut 11oz. off the weight of the gun!!!!!! I might sell some of the prototypes in my SUPER SALE i will be having on the 1st of January. I am currently crunching the numbers to figure out how much to charge. Watch the Dealers section for the preorder.......I only plan on doing one run of them.

Body Features:
-Vertical feed threaded for use with angel feednecks
-Dual angel detents
-Uses autococker barrels
-available body version and rail milling to adapt X valve to classic automag rt (11oz weight reduction)


I have developed a scratch free fixture to mill the rails on.

Note: some of you may notice that by cutting the slot in the back of the rail for the x valve milled through one of the NPT air holes....lucky for us AGD did not connect the back left two air fitting holes with the input for the valve! thought i would mention that to avoid the posts by people.

Classic RT ULE body (uses stock RT valve)
http://i182.photobucket.com/albums/x291/bridgemach90/ULERTBODY_zpsa95edf96.jpg
The above body on my red smear automag RT
http://i182.photobucket.com/albums/x291/bridgemach90/ULEREDSMEARRT_zps3af82051.jpg

Classic RT body for use with X valve...Shown on my red smear automag rt (This body will cut 11 oz. off your gun when used with an X valve and the ULE rail milling(shown below))
http://i182.photobucket.com/albums/x291/bridgemach90/ULERTXVALVE_zpscfdc97d7.jpg

This body will work with all other automags except for the classic automag RT and the sydarm...Shown on my Acid Red Emag
http://i182.photobucket.com/albums/x291/bridgemach90/ULEEMAGRTFRONT_zpsaee647a0.jpg

ULE milling for classic RT rail....this milling is necessary to make the classic RT accept the X valve. reduces the weight of the rail by 30%
http://i182.photobucket.com/albums/x291/bridgemach90/RTRAILULE_zps02f22149.jpg

[Bunny]

:wow: That's awesome!! I can't wait to see what people come up with using these bodies. :headbang:

[BigEvil]

Any chance we can get them twist lock? :) They look awesome btw! :dance:

[Xmagterror]

Any chance we can get them twist lock? :) They look awesome btw! :dance:
The current body blank does not have enough material for the feedneck threads if the body was bored out to accept twist lock barrels. Might be able to make a bolt on feedneck adapter to make this work. Why not just cocker thread your barrel? Thats what im going to do for my red smear rt.

[BTAutoMag]

This is a good way to bring in the new forum:cool:

[BigEvil]

Why not just cocker thread your barrel? Thats what im going to do for my red smear rt.


Damn you....I forgot you can do that :headbang: I guess I will be sending a few your way :D

[wimag]

very nice !!

[Jaccen]

Wow, just wow. Thank you for modernizing the Classic RT platform.

[Xmagterror]

Im glad you guys like the bodies! They were a real challenge to make.

Making these prototypes was a bit of a gamble because the RT platform is old.....hoping these bodies breath some new life into my favorite AGD gun. And also the RT front style body that will fit all the other AGD guns will look awesome.

[Xmagterror]

Make a post if you are interested in purchasing one of these bodies. price will be a little more expensive than the ULE minimag style bodies i did (minimag bodies $170). This run can only happen if we get enough sold

[BigEvil]

I will take two, one of each style. Also - one barrel to thread.

[tolar250]

im in for one that takes the classic Rt valves

[Mobius V]

I have a friend that might be interested in this, what would he have to do to get his RT classic to accept X/emag/rtp/retro valve? Just send you his rail for milling? Also what do you do to replace the banjo field strip screw, can you just put the rt pro/emag rail bushing in and use a regular field strip screw?

[Xmagterror]

I have a friend that might be interested in this, what would he have to do to get his RT classic to accept X/emag/rtp/retro valve? Just send you his rail for milling? Also what do you do to replace the banjo field strip screw, can you just put the rt pro/emag rail bushing in and use a regular field strip screw?

Would just need to send the rail to me for milling. The body will include the special offset bushings needed to use a standard agd field strip screw.

[GEE TEE]

That looks great

I'm well happy with the Minimag one I purchased last year... good luck project I'm sure these will sell quickly

[RST]

im in for one that takes the classic Rt valves


Me too.

[hill160881]

Just awesome.

[Ruler_Mark]

Looks nice, wish i still had my blood smear :(

[RT Lover]

will you offer ule milling on rails? also pm inbound

[Sea_Chip]

I'm in for one ULE RT Body that uses the RT Valve and if an option to have a barrel threaded.

[Xmagterror]

Starting the pre order for these tomorrow in the dealers section of the site.

[dre1919]

Those look very nice! Makes me almost wish I had my old school RT back (I say almost though because that banjo bolt nonsense was a pain in the buttocks).

[Xmagterror]

Those look very nice! Makes me almost wish I had my old school RT back (I say almost though because that banjo bolt nonsense was a pain in the buttocks).

I agree.....Thats partly why i developed the body that lets you run an x valve and the rail milling to support it.

Jay

[1stTarget]

Okay I need to ask questions. I have a classic RT valve, and body. Would love to get center feed body, in aluminum. Do not want to make a conversion to rail that would not allow me to use original body and rail. In fact using RT valve and banjo is a plus. Is my preference doable? Yes I have cocker barrel so that is not a problem, but I love my RT setup.

[Arstron]

I am interested, but would not have the money for awhile. I really like what you are doing with this. :clap:

[Xmagterror]

D
Okay I need to ask questions. I have a classic RT valve, and body. Would love to get center feed body, in aluminum. Do not want to make a conversion to rail that would not allow me to use original body and rail. In fact using RT valve and banjo is a plus. Is my preference doable? Yes I have cocker barrel so that is not a problem, but I love my RT setup.

The 1st body on the top of the thread will allow you to use your existing rt valve and
Rail without any modification.

[1stTarget]

Thank you for your response. However it sold quick. So I will keep track of future availability/aka new production run.

[Xmagterror]

Thank you for your response. However it sold quick. So I will keep track of future availability/aka new production run.

It has not sold yet. the body you need is the 1st body from the top of the 1st picture. These are the prototypes....you can get productions pieces in aprox 8-10 weeks.

[1stTarget]

Hurrah's! Price is-? Yes I know it is probably on forum. However I have left foot in a walking cast, and have had three teeth pulled in the last two weeks. Pain medication does have some side effects.

[Xmagterror]

Preorder for these bodies is now in the dealers section!!!!

[TwilightG]

Are you able to to cut TL-barrels to AC thread for those of us with matching-ano RT barrels?
if so, how much do you think it would cost?

if not, any suggestions on who might be able to do this?

[Ando]

if not, any suggestions on who might be able to do this?

Ty, and he can freak it. :)

[Xmagterror]

Are you able to to cut TL-barrels to AC thread for those of us with matching-ano RT barrels?
if so, how much do you think it would cost?

if not, any suggestions on who might be able to do this?

Yes i can autococker thread your TL barrel. I just did the barrel for my red smear RT last night on the CNC....Price for this service is in the pre-order.

[TwilightG]

Yes i can autococker thread your TL barrel. I just did the barrel for my red smear RT last night on the CNC....Price for this service is in the pre-order.
Thanks, I somehow missed that when I originally read the pre-order thread.

How much does this shorten the barrel? And is it really noticeable? The stock barrel already looks a little short because the body is so long.

[Xmagterror]

Thanks, I somehow missed that when I originally read the pre-order thread.

How much does this shorten the barrel? And is it really noticeable? The stock barrel already looks a little short because the body is so long.

The barrel only sticks out of the body 1/4" less than it does stock....really no difference

[mbt]

I received my main body. What kind of feedneck did you install?

[N3rd15]

Are these bodies still available?

[captian pinky]

they were a limited run and they were not rerun. the preorder was to small.

[Xmagterror]

PO #2 tanked.
Hit up Cougar20th on here

[maniacmechanic]

Are these bodies still available?

What one are you lookin for ?? ,, I have an X valve style I'd sell

[tucson.az.jbreen]

A bit off topic, but are there any minimag style ule bodies remaining?

wtb minimag ule body.

also were the ule minimag bodies twist lock or cocker thread?

[cougar20th]

PO #2 tanked.
Hit up Cougar20th on here

That is correct I have a xmt classic rt body for sale. Listed in the BST.

[blackdeath1k]

A bit off topic, but are there any minimag style ule bodies remaining?

wtb minimag ule body.

also were the ule minimag bodies twist lock or cocker thread?

Cocker threaded

[rickenbacker22]

Have these warp left bodies been sold? If so iwould love to see a warp left body on a classic rt !!!
If possible are warp left bodies still available? I've been gone for a while any info is greatly appreciated.

[Xmagterror]

Have these warp left bodies been sold? If so iwould love to see a warp left body on a classic rt !!!
If possible are warp left bodies still available? I've been gone for a while any info is greatly appreciated.

Never made any warp bodies for the classic RT. I dont have any bodies for the classic. sold them years ago. Tried to do another pre order run but it was a flop....tons said they wanted one for years but hardly anyone ordered one.

cougar20th has a brand new classic RT ULE body.

[DevilMan]

Hey XMT... sent ya a message.. did ya clear room in your mailbox yet?

[Scottprocurot]

Very nice I'm inspired

[cougar20th]

Just so people know. The RT Classic Ule I had has been sold.

[TwilightG]

I have a friend that might be interested in this, what would he have to do to get his RT classic to accept X/emag/rtp/retro valve? Just send you his rail for milling? Also what do you do to replace the banjo field strip screw, can you just put the rt pro/emag rail bushing in and use a regular field strip screw?


Would just need to send the rail to me for milling. The body will include the special offset bushings needed to use a standard agd field strip screw.

I know that I'm bumping and old thread and that these bodies are not made anymore.

But I was wondering if the offset rail bushings were ever made?

[Xmagterror]

I know that I'm bumping and old thread and that these bodies are not made anymore.

But I was wondering if the offset rail bushings were ever made?

I think i only made like two of them

[TwilightG]

I think i only made like two of them
Is this only necessary when using a classic RT frame? (because the banjo hole is larger)
If using a "standard" frame, the valve should line up correctly, right? I've read that I lvl 7 spacer can be used in the banjo hole to act as a rail bushing.

[audioSLAVE]

What needs to be done to have another run of the RT Classic ULEs? :)

[cougar20th]

What needs to be done to have another run of the RT Classic ULEs? :)

I know last time XMT tryed there wasnt enough interest. I believe its something like 25 bodies if he will do it.

[going_home]

If he made them first, and then sold them it'd work better.

He's too busy with his real job and it takes him a year to finish things.

[727max]

If he made them or if anyone has one they would sell I'd be interested.

[agreen79]

What are the chances these RT Classic bodies get made again?

[audioSLAVE]

What are the chances these RT Classic bodies get made again?

Message him, he might have a couple left.

[agreen79]

Message him, he might have a couple left.Will do, thx!

Sent from my SM-N960U using Tapatalk

[Xmagterror]

I have just a few of these bodies left in stock...I really doubt i will ever make them again. PM me for info

[snoopay700]

I have just a few of these bodies left in stock...I really doubt i will ever make them again. PM me for info

I’m definitely interested, had to drop out last year...

Sent you a PM. Just deleted some messages to make sure I’ve got room for a response.

[Xmagterror]

I’m definitely interested, had to drop out last year...

Sent you a PM. Just deleted some messages to make sure I’ve got room for a response.

Ive got just a few of these left. when there gone thats it.LOL

[snoopay700]

Ive got just a few of these left. when there gone thats it.LOL

I’ll take one of the few off your hands then

[Xmagterror]

I still have a few left guys

[blitz121]

Sent you a PM

[salomon16]

Sent PM would like to buy one if still available