PDA

View Full Version : intelliframe


alex1841
02-19-2002, 06:29 PM
i just ordered an intelliframe from agd and was wondering if there is any type of special adjustments or something.
Xzion
02-19-2002, 06:37 PM
if your putting it on an RT PRO or 68automag/minimag, it should bolt on, no questions asked. though if you orderd it to put on a classic RT, and didnt specify it was for a classic RT, you may have to drill out a larger hole to compinsate for the gas-through field strip screw.
AdrenalineMag
02-19-2002, 08:42 PM
classic rt as in an automag classic with a retro valve? or as in the good ole rt when it first came out? explain "gas thru field strip screw" thanks.
ProjectMag
02-19-2002, 09:00 PM
He means classic RT as in the old school RT's. The old school RT's use the banjo bolt which is a "gas thru field strip screw". Since air travels through the rail on the RT, the banjo bolt must be used. It's has a larger diameter than the normal field strip screws, so the Intelliframe requires you to drill the rear hole out to compensate.