f/s PTP/ARMSON Micro E-MAG 2000

[harpo568]

BLACK/BLUE SPLASH PTP Micro E-MAG
NOT SURE OF THE TRUTH OF IT BUT I was told it was 1 of 10 black/blue PTP Micros.
vert feed.
cocker threaded
I would honestly say it is in near perfect condition BUT the sear has broken. I have a sear that needs to be modified to install.
Used very little before the sear broke.
all original inside and out, no modifications no scratches...i just gave it a good look over again and there are NO scratches anywhere.
I have the battery charger but not the power cord (stolen by another player)
the sear broke several years ago and the gun was cleaned and put away in a foam lined case waiting to be fixed and then was forgotten (I managed a field and between fixing players guns and tinkering on projects it just got forgotten).
I'm not really excited about selling it but I need the money much more than I need to fix it just to hang on the wall.

not sure about the price so I am going to start out asking $700.00+ shipping (don't flame over the price! not sure what it's worth)
I will take reasonable offer.
NO TRADES. I can't play any more and am trying to thin out my collection from somewhere around 30+ to 5 or less guns.

after being ripped off in the past I am extremely picky about my selling:
1. I do not ever ship before payment has cleared.
2. I do not use paypal anymore (got taken for $500 by an out of country buyer)
3. payment MUST be by bank cashiers check. no personal checks...and DON'T SEND CASH. I will accept a direct bank to bank transfer.
4. payment should be sent with signature and delivery confirmation.
5. Item will not be shipped until payment has cleared but once it has I will ship the gun PROPERLY PACKAGED, insured with delivery confirmation.
6. local pickup is ok.
7. I DO NOT AND WILL NOT SELL TO ANYONE UNDER 18. EVER!

I know that with these requirements it means you have to put a lot of trust in me but I am not here to rip anyone off.

[Apollo816]

this is a Jungle Knights PTP MicroMag...if yours is one of them then yes...it is a rare MM....


http://ultimatepaintballmarkers.us/wp-content/uploads/PTP_PRO_TEAM_PRODUCTS_MICRO_E_MAG_2000_JUNGLE_NIGH TS_LVL3_AGD_AUTOMAG_PNEUMAG_RT_01_qgzh.jpg

[harpo568]

looks just like it.
I have no idea what to ask for it...had no idea if the $700 was say over the top or not but had to start somewhere.

[Bunny]

Looks like more of a blue tiger (https://dl.dropbox.com/u/6823946/Retro%20AGD/MicroMags/Blue%20Tiger/Micromag-Dlx-BlueTiger-1.jpeg) to me.....

Btw, beautiful mag! I doubt this will sit on the forum that long. There seems to be alot of PTP fans around here :D

http://www.automags.org/forums/attachment.php?attachmentid=87610&d=1363808435

[neogp]

hmm..thinking I need a new project..:dance:

[harpo568]

make me an offer I can't refuse.
for the price I am asking I'll throw in an extra barrel or 2 (gotta see what I have), a HALO and I'll pay shipping.
I have a few spares that come with it. not much but whatever I have I will send with it.

[harpo568]

wow I figured someone would be interested by now.
I am only keeping it up here until next saturday after that it will go back on the wall.

[OPBN]

Market sucks right now. Not a reflection of the marker, just terrible time to sell. Xmags are selling for $700...

[SummaryJudgement]

Market sucks right now. Not a reflection of the marker, just terrible time to sell. Xmags are selling for $700...

Unfortunately true, however I feel $700 for the condition he describes it is in to be fair. Just my 2 cents :)

[OPBN]

Unfortunately true, however I feel $700 for the condition he describes it is in to be fair. Just my 2 cents :)
I missed where I said it wasn't a fair price? He seemed to be lost as to why this wasn't snatched up in a matter of days and simply trying to explain where the market is right now. Higher end markers simply aren't flying off the shelves these days unless they are incredible deals. I would keep it listed up for another few weeks and see what happens.

[harpo568]

oh I didn't expect it to go overnight. Just thought someone would show some sort of interest...at least a couple of offers anyway. :-)
I didn't know the market was so soft right now...but that does explain a lot.
I'll leave it on here for a few weeks and see what happens.

[harpo568]

I am finally back home and ready to do some business...anyone interested in this?

[Frizzle Fry]

Unfortunately true, however I feel $700 for the condition he describes it is in to be fair. Just my 2 cents :)

If it was 100% complete and functional I'd tend to agree with that as a starting price, but it's missing the spacer, the vanity plate, and the original ASA. It's nonfunctional without a custom sear, and it also doesn't include a charger. I've seen complete, clean, functional eMicros in comparable patterns go $500-$600. Not intended to bash the price (seller says right off the bat, it's negotiable), but yeah, the automag market has dropped and it might go quicker at a lower price - it's a beautiful marker.

I have a few spare spacers an vanity plates if the seller/buyer needs a set.

[audioSLAVE]

If it was 100% complete and functional I'd tend to agree with that as a starting price, but it's missing the spacer, the vanity plate, and the original ASA. It's nonfunctional without a custom sear, and it also doesn't include a charger. I've seen complete, clean, functional eMicros in comparable patterns go $500-$600. Not intended to bash the price (seller says right off the bat, it's negotiable), but yeah, the automag market has dropped and it might go quicker at a lower price - it's a beautiful marker.

I have a few spare spacers an vanity plates if the seller/buyer needs a set.

Original ASA?

[Frizzle Fry]

Original ASA?
Match anodized duckbill ASA or Benchmark "root beer" On/Off with cradle.

[audioSLAVE]

Match anodized duckbill ASA or Benchmark "root beer" On/Off with cradle.

Was that something offered with the fancier ano jobs? The only reason I ask was my gloss black Micro Emag never came with an ASA, and I bought it new from the shop.

[harpo568]

it does have the spacer (where did you come up with that being missing?) and as for the charger...it just needs a new cord. as for a vanity plate I do have the emag sticker that came on it. all it needs is the correct sear OR the sear I got from PTP slightly modified. if you think the mysterious ASA making a big difference in the price...well that's being a bit anal retentive don't you think?
troll someone else please....

[OPBN]

Just as a point of reference, when he mentions Vanity plate, he means the filler piece that attaches to the stock foregrip mount and covers the top of the battery. Look at yours and then look at the one Apollo posted and you can see the piece.

[Frizzle Fry]

I sent you a PM man, I'm sorry if it seemed like I was trolling. Good luck with the sale.

[Dr2k S2n]

Is Emicro Still Available

[Dawg047]

Is Emicro Still Available

Check the dates on all of the ancient threads you are resurrecting...This was 9 years ago