View Full Version : X Valve help
jvaughn212
03-24-2013, 12:32 PM
I am having an issue where when I hold my trigger down, it continues to fire. It isn't full auto, just a shot/pause/shot/pause/etc.
This is my current setup:
X Valve
ULT (No shims)
No Level X shims
Red spring
Not a huge deal, since it works well otherwise but I'd still like to know what is causing it and how to fix it.
Thanks!
Cokrkilr
03-24-2013, 02:50 PM
Do you know what length on off pin you are using? It may not be long enough and your getting a little reactivity out of it. Mine did this with a .712 pin and my pneumatic setup, I changed it to a .750 and it went away
jvaughn212
03-24-2013, 03:53 PM
It's the standard ULT pin. Not sure on the length. I can try the on/off from my friend's mag and see if I get the same results. Thanks for the idea!
Spider-TW
03-24-2013, 06:47 PM
The ULT only has one standard pin length.
It should be one of the top o-rings leaking, either the one on the pin or the one on the body top.
jvaughn212
03-25-2013, 06:50 AM
I had planned on ordering a parts kit soon anyway. Hopefully that does the trick. Thanks!
athomas
03-25-2013, 07:43 PM
Yes, as mentioned, it sounds like one of the top on-off orings is leaking. When you get your parts kit, make sure you also get a kit for your ULT. These orings aren't standard orings that come in the retro/X valve parts kit.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.