custom body pics

[RT Lover]

there should be a link of all the body types out there and yes i have looked through the pic thread and couldnt find it, not a karta, chord, ptp Ripper, shock wave and not a dallara. though it kinda flowed like a dallara it had some wicked features. really cant describe it i have only see it a few times and just cant find a pic. so lets see them guys!

[sQuidvision]

Was it an XMT Phoenix body?

[El Zilcho]

This?

http://www.automags.org/forums/showthread.php?263370-Mag-Parts-Logic-Ripper-M90-Phoenix-Karta

[Cokrkilr]

I wanna know what body is shown on Luke's site... on the cut down emag rail.

[suaze]

IT body.

http://lukescustoms.com/Page11_Rail_Milling/Emag%20Praxis%20Shorty.JPG

[Cokrkilr]

Is that one pictured pretty much the only one?

Google found me zip on it

[blackdeath1k]

That's sweet.

[splat15k]

I stayed away from those IT bodies over the years for 2 reasons:
1. I have yet to see them paired with an aesthetically complimentary rail.
2. Looks like a pain to clean.

[captian pinky]

PBX body 1 of 2, tuna has the other one raw apparently

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00331.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00339.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00338.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00335.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00333.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00340.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00341.jpg

http://i86.photobucket.com/albums/k92/ninjasuperman/my%20paintball%20guns/PBX%20splash%20mag/DSC00342.jpg

[RT Lover]

maybe the it body? idk this had some fine lines carved in it... could of swore the marker was red. any more pics of the it body? anything else out there?

[Cokrkilr]

I stayed away from those IT bodies over the years for 2 reasons:
1. I have yet to see them paired with an aesthetically complimentary rail.
2. Looks like a pain to clean.

I think if the rail and body in that pic were ano matched it would look pretty decent. Maybe if the front and rear had a couple of the tear drops in it to tie them together. Or maybe an omega rail.with the hard lines in it would look OK?

I've only ever seen that body on that frame though

[sQuidvision]

perhaps the toxic body?

http://i882.photobucket.com/albums/ac26/Wrathbringer6/AGD%20Catalog/VenomousDesignsToxicCAD.jpg

[RehKal]

perhaps the toxic body?




must have!

[Cokrkilr]

Hahaha.... thats a long shot right there.... he's about 40 pieces behind on his customers orders at the moment

[sjrtk]

I have an IT body on a Noxious Rail. It does complement the design pretty well i will get pics up tomorrow.

I am always looking for IT's

[mpsd]

My Alien Mag with the IT body:
http://i181.photobucket.com/albums/x299/mpsd18/DSC03978.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC03976.jpg

Let me know if want pics of the DW bodies as well. I have a couple Dallaras, one Karta and a rare 1st gen Chord.

:cheers:

[Cokrkilr]

I think that looks great! The frame and fore grip really compliment the body on that, well done sir

Edit: I just barely noticed its on an omega rail too.... the shadows made it look stock in the smaller picture on my phone. That really is a sweet looking setup.

[RehKal]

Would love to get my hands on an IT barrel as well. *sigh* So many mags, so little time.... Well... so little money...

[Carnage reigns]

I think that looks great! The frame and fore grip really compliment the body on that, well done sir

Edit: I just barely noticed its on an omega rail too.... the shadows made it look stock in the smaller picture on my phone. That really is a sweet looking setup.

That's a thrasher rail. The front also has the design.

[need4reebs]

here is probably tha nicest set up ive seen in awhile...a Kut Karta body/Dallara Kombo....Splat15k did a nice job on this mod!!!

http://i384.photobucket.com/albums/oo281/splat15k/DSC_0006.jpg
http://i384.photobucket.com/albums/oo281/splat15k/DSC_0002.jpg

[Dayspring]

PBX body 1 of 2, tuna has the other one raw apparently

I remember when we worked on that body...

[captian pinky]

have any more info on it?

[need4reebs]

I remember when we worked on that body...

any plans to make any more or possibly some new AM/MM length bodies? people have been asking about new AM/MM length bodies as well as rail for awhile now...but not much luck there?

[captian pinky]

any plans to make any more or possibly some new AM/MM length bodies? people have been asking about new AM/MM length bodies as well as rail for awhile now...but not much luck there?

PBX went under if im not mistaken

[El Zilcho]

Am I the only person who is bothered by the fact that you can see the change in valve diameter at the dump chamber (on the side of the bodies at least) with a lot of these aftermarket bodies? I know they were but, to me it seems like the bodies were not designed to fit the valves.

[need4reebs]

PBX went under if im not mistaken

wat about tha people still in business that are active on the forums? pump kits and AM/MM body/rails get brought up every day, but no responses really? ya know what i mean?

[BiNumber3]

Are you talking about the part of the valve being visible when it's normally not on standard bodies? If so then there's no reason to worry, the valve contains the pressure, not the body.

[El Zilcho]

Are you talking about the part of the valve being visible when it's normally not on standard bodies? If so then there's no reason to worry, the valve contains the pressure, not the body.
Yes, that is the portion of the valve I was referring to. I was not concerned about any mechanical/safety issue, I just find it aesthetically unappealing. Am I the only one?

[Dayspring]

The PBX people that designed that aren't on the forums really.

Mike Quinn (Of MQ valve fame) is too busy to read forums. Kerry moved and is doing his own thing.

[RT Lover]

My Alien Mag with the IT body:
http://i181.photobucket.com/albums/x299/mpsd18/DSC03978.jpg
http://i181.photobucket.com/albums/x299/mpsd18/DSC03976.jpg

Let me know if want pics of the DW bodies as well. I have a couple Dallaras, one Karta and a rare 1st gen Chord.

:cheers:

the it and karta are sexy... im thinking it was a VD body not the one shown up top some but a different 1, i went to look a the thread but its gone

[need4reebs]

The PBX people that designed that aren't on the forums really.

Mike Quinn (Of MQ valve fame) is too busy to read forums. Kerry moved and is doing his own thing.

haha...i talking about the airsmiths that are on here everyday? the PBX people havent been around for awhile...right?

[sQuidvision]

Am I the only person who is bothered by the fact that you can see the change in valve diameter at the dump chamber (on the side of the bodies at least) with a lot of these aftermarket bodies? I know they were but, to me it seems like the bodies were not designed to fit the valves.

i dont mind it though i agree its not the most sightly thing ever. I guess if i had to choose between showing this and the lines in the bodies i would take the lines in the bodies.

[RT Lover]

i dont mind it though i agree its not the most sightly thing ever. I guess if i had to choose between showing this and the lines in the bodies i would take the lines in the bodies.


what?

pbx wasnt that the shop in texas that sold out years ago

[sQuidvision]

i really like the shape of the dallara and karta. What i meant to say was i would rather have the nice shape of the body that reveals the part of the valve that changes diameter than have the valve fully covered.

[BiNumber3]

Yea for the most part I don't care for it, perhaps a window or such instead where you can't see the change in diameter so easily

[maverick13]

toxic body and rail, on my pneumag

http://i1078.photobucket.com/albums/w492/maverick13fr/Sleeper008b.jpg

[BTAutoMag]

that is sick!

[knownothingmags]

so we are just making another automags picture thread?

[need4reebs]

so we are just making another automags picture thread?

wasnt that what the OP asked people for? pics of different custom bodies?

[knownothingmags]

wasnt that what the OP asked people for? pics of different custom bodies?

very true. forgot the cutstom part.

[ScreamingShiek]

From the description I don't think this is it, but I'll throw it in anyway. My custom slug body, I believe made by Detroit.
http://i1224.photobucket.com/albums/ee371/ScreamingShiek/Dec-2010AirgunDesignsEmag-1_zps93cfb38f.jpg

[need4reebs]

From the description I don't think this is it, but I'll throw it in anyway. My custom slug body, I believe made by Detroit.
http://i1224.photobucket.com/albums/ee371/ScreamingShiek/Dec-2010AirgunDesignsEmag-1_zps93cfb38f.jpg

yeah but that sure is Sa WeeT!!!

[Bunny]

Bling Bling Automag Body: Released around 2002-2003 in Kentucky. It was created around the time the first deadlywind chords were being milled. I think KayleAGD had one if I remember correctly.

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/BlingBlingWebsite.png

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-023F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-024F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-025F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-026F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-030F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-031F.jpg

https://dl.dropbox.com/u/6823946/Retro%20AGD/BlingBlingBody/MVC-032F.jpg

[RT Lover]

wasnt that what the OP asked people for? pics of different custom bodies?

yes just body and rails, i looked at the automag pic thread i didnt see a bunch of custom bodies, lot of old stuff

[swe_crazy]

Bunny*

First time I see it, want it...how many were produced?

[Bunny]

Bunny*

First time I see it, want it...how many were produced?

Not too sure, there wasn't that much information about the company. I know KayleAGD owned one since he lives in/near Kentucky, but other than that, I think they are pretty darn rare. I haven't seen any come up for sale.

[Bunny]

Fetus Bodies:

https://dl.dropboxusercontent.com/u/6823946/Retro%20AGD/Fetus/emag_festus33_19163.jpg

https://dl.dropboxusercontent.com/u/6823946/Retro%20AGD/Fetus/emag_festus33_28385.jpg

https://dl.dropboxusercontent.com/u/6823946/Retro%20AGD/Fetus/emag_festus337645.jpg

https://dl.dropboxusercontent.com/u/6823946/Retro%20AGD/Fetus/3ynicsy.jpg

https://dl.dropboxusercontent.com/u/6823946/Retro%20AGD/Fetus/mag_matmc891124.jpg

[BTAutoMag]

hey bunny, do you have any old pictures of my gun. I dont have any and you seem to have pictures of everyone elses:rofl:

[Bunny]

Give me a few keywords and i'll see what I can find.....

I did find your old signature though!
https://dl.dropboxusercontent.com/u/6823946/AO/Custom%20Made%20Sigs/btautomag.gif

lol

/Off Topic

[BTAutoMag]

OMFG! I thought that was gone forever!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!

how do you have that!? its been 12 years!!!!!!

[blackdeath1k]

Man! I remember when you used to use that.

[BTAutoMag]

says your join date is 2011... :confused:

[blackdeath1k]

Look up the user name predater. Join date of 2000 or 2001. I couldn't remember my password. And I'm sure my email Addy from back then is no good if I could remember that. So I made a new account with the user name that I use on all of the drag race forums I'm in.

My avatar back then was a picture of a predator cloaking. If that rings a bell. I lost that image back in 05 when I had a nasty computer crash.