SO! barrel swap comparison

[BTAutoMag]

since I have an abundance of swap and was purposely breaking paint today...

here are the swabs I have, one is a CP microfiber swab and the other 2 are bomb swabs.
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/IMG_3047_zps4b261e78.jpg

I've had a LONG day of broken paint so at the time I did this review the swabs have already cleaned a gummed barrel at least6 times. the bomb swabs had each gone through a barrel 2-3 times a piece and the CP I used ONCE!

here's how I run the test.
-put a ball halfway in the breach and circumcise it
-shoot 2 more times with an empty breach
-push the swab into the barrel until I see it in the breach and pull out.
-take a picture
-push the same swab all the way through the barrel
-take a picture

heres the coated barrel
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/20130412_170327_zpsaade8bf1.jpg

Bomb swab used with barrel on gun
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/20130412_170443_zps549bd54a.jpg

CP used on gun
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/20130412_171045_zps99946619.jpg

Bomb swap pushed through
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/20130412_170516_zpsb1bc56da.jpg

CP pushed through
http://i152.photobucket.com/albums/s177/chromebeast/Paintball/20130412_171109_zps9de9a376.jpg

so that was the 2nd use of the CP and the 3rd or 4th use of the Bomb swab. even using a bomb swab thats cleaned out 3 other breaks it still polished the barrel to a shine where the CP failed at it miserably at twice the cost of the bomb swab. I even used that same bomb swab to clean out the barrel after the CP pic.

Bomb swabs FTW!:headbang:

[going_home]

Suggestion

1) buy better paint

2) match the barrel bore to the paint

;)

[BTAutoMag]

im trying to tune a lvl 10. thats why im breaking the paint:p

[going_home]

im trying to tune a lvl 10. thats why im breaking the paint:p

Hmm. Interesting.
Never had that happen.

[wimag]

im trying to tune a lvl 10. thats why im breaking the paint:p

tear that efficiency mod out and you will solve your problem.

[Cokrkilr]

I thought this was going to be a thread about a comparison of barrels, trickery sir... :ninja:

[BiNumber3]

I like using the rubber 1-piece squeegees with a piece of cloth at the end

[Bunny]

Whats a good place to buy a bombswab at? http://bombswabs.com/ ???

[Freedy500]

Whats a good place to buy a bombswab at? http://bombswabs.com/ ???

Yup. Dave may still be ale to throw some AO stuff on there :) I'm thinking about buying a pod swab since I have been breaking paint in my pods recently. Good stuff!